1 / 1

Dipartimento di Ingegneria Chimica e dei Materiali

UNIVERSITA’ DELLA CALABRIA. Dipartimento di Ingegneria Chimica e dei Materiali. D. INDUCTION TIME. C. B. A. A Monte Carlo simulation of protein nucleation on porous membranes. Efrem Curcio 1,2 , Valerio Curcio 3 , Gianluca Di Profio 2 , Enrico Drioli 1,2

reeves
Download Presentation

Dipartimento di Ingegneria Chimica e dei Materiali

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. UNIVERSITA’ DELLA CALABRIA Dipartimento di Ingegneria Chimica e dei Materiali D INDUCTION TIME C B A A Monte Carlo simulation of protein nucleation on porous membranes Efrem Curcio1,2, Valerio Curcio3, Gianluca Di Profio2, Enrico Drioli1,2 1. Department of Chemical Engineering and Materials, University of Calabria - Via P. Bucci CUBO 44A, 87030 Rende (CS) Italy 2. Institute on Membrane Technology ITM-CNR, c/o University of Calabria - Via P. Bucci CUBO 17C, 87030 Rende (CS) Italy 3. I.S.A. "Michele Fanoli", Viale dello Sport 28,  35013 Cittadella (PD) Italy Aim of the work Two-dimensional Ising model has been used to study the heterogeneous nucleation of protein crystals on porous polymeric hydrophobic membranes. 2D Ising model has been successfully applied to study heterogeneous nucleation on square lattice with nearest-neighbour interactions and free boundary conditions[1]. Sear (2006) used the same approach to determine the heterogeneous nucleation rate on microscopic impurities, and it was found more than four orders of magnitude faster than homogeneous nucleation[2]. A B Energy function of the system for spin-spin and spin-field interactions: ij=1 is the state of spin, J is the coupling constant between free neighbouring spins, h the external magnetic field, and Js is the strength of the coupling between a free spin and a fixed spin of the wall. It is assumed Js=0, that is the polymeric surface does not preferentially attract either phase. Interfacial tension  between the bulk spin-up and spin-down phases in 2D Ising model: C D Simulation snapshots of the system 40x40 sites in size and J7kT = 0.8, h/kT = 0.05. Fixed spins are in red, spin-up phase in blue. Simulation results HEW lysozyme crystal grown on a microporous polypropylene membrane (pore size: 0.2 m) Number of spin-up sites, as a function of number of cycles in the 40x40 lattice. • The heterogeneous nucleation rate (related to the reciprocal of the induction time) is faster on porous membranes than on flat surfaces, in agreement with predictions of Classical Nucleation Theory; • the nucleation process proceeds via two steps: 1) nucleation into the pore; 2) nucleation out of the pore, both to be considered activated processes; • an optimal pore size, corresponding to maximum of the nucleation rate function, exists (pore approximately of the same size of the critical nucleus). Bibliography [1] E.N.M. Cirillo, J.L. Lebowitz, “Metastability in the two-dimensional Ising model with free boundary conditions,” J. Stat. Phys. 90(1998)211–226 [2] R.P.Sear, Heterogeneous and Homogeneous Nucleation Compared: Rapid Nucleation on Microscopic Impurities, J. Phys. Chem. B 110 (2006) 4985-4989 “Gricu 2004” - Ischia (Napoli), Italia, 12-15 settembre 2004

More Related