1 / 16

San Joaquin Valley APCD Road Modeling Using AERMOD

San Joaquin Valley APCD Road Modeling Using AERMOD. Road Modeling. Roadways & Commercial / Industrial Properties Diesel Travel, Idle, & TRU emissions. Residential project: Roadways (Major Arteries, Hwys, &Freeways) Commercial / Industrial operations

roger
Download Presentation

San Joaquin Valley APCD Road Modeling Using AERMOD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. San Joaquin Valley APCDRoad ModelingUsing AERMOD

  2. Road Modeling Roadways & Commercial / Industrial Properties • Diesel Travel, Idle, & TRU emissions. Residential project: • Roadways (Major Arteries, Hwys, &Freeways) • Commercial / Industrial operations (May include other emission sources) Mixed Use projects: • Can include all of the above. Contact District

  3. Diesel Truck Emissions • Truck Travel • Truck Idling • TRUs

  4. Series of Volume Sources Truck Traveling • Modeled as a Series of Volume Sources following the path of travel

  5. Volume Parameters • Height = Truck Height (assume 15 ft) • Initial Vertical Dimension = Height / 4.3 = 1.06 m • Width (W) = Truck Width (assume 12 ft) • Initial Lateral Dimension = 2W / 2.15 = 3.40 m • Release height = based on truck configuration. • Traveling Emission Factors = from EMFAC. • Site specific data should be used, if known.

  6. Truck Idling Modeled as a Point Source

  7. Diesel Idling Modeling Parameters Vertical Exhaust Stack Parameters: • Height = 3.84 meters • Diameter = 0.1 meters • Velocity = 51.71 m/s • Temperature = 366 K • Emission Factors derived from EMFAC run • Unit specific data should be used, if known

  8. Diesel Idling Modeling Parameters High Horizontal Exhaust Parameters: • Height = 3.84 meters • Diameter = 0.1 meters • Velocity = 0.001 m/s • Temperature = 366 K • Emission Factor derived from EMFAC run • Unit specific data should be used, if known

  9. Diesel Idling Modeling Parameters Low Horizontal Exhaust Parameters: • Height = 0.183 meters • Diameter = 0.1 meters • Velocity = 0.001 m/s • Temperature = 366 K • Emission Factor derived from EMFAC run • Unit specific data should be used, if known Under Truck

  10. TRU Emissions Modeled as a Point Source

  11. AERMOD TRU Stack Parameters • Height = 3.96 meters • Diameter = 0.04445 meters • Velocity = 49 m/s • Temperature = 501 K • Emission Factor = 0.76 g/BHP-hr • Unit specific data should be used, if known. Trailer

  12. Example Project

  13. Example Project Landfill Sources: • Composting • Expansion of Existing Landfill • Waste Recycling / Separation • Truck Unloading • Scale Area • Truck Travel • Truck Idling

  14. Questions

More Related