1 / 29

Chapter 7

Chapter 7. ARP and RARP (Address Resolution Protocol and Reverse ARP). Objectives. Upon completion you will be able to:. Understand the need for ARP Understand the cases in which ARP is used Understand the components and interactions in an ARP package Understand the need for RARP.

sereno
Download Presentation

Chapter 7

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 7 ARP and RARP (Address Resolution Protocol and Reverse ARP) Objectives Upon completion you will be able to: • Understand the need for ARP • Understand the cases in which ARP is used • Understand the components and interactions in an ARP package • Understand the need for RARP TCP/IP Protocol Suite

  2. Figure 7.1ARP and RARP TCP/IP Protocol Suite

  3. Figure 7.2Position of ARP and RARP in TCP/IP protocol suite TCP/IP Protocol Suite

  4. 7.1 ARP ARP associates an IP address with its physical address. On a typical physical network, such as a LAN, each device on a link is identified by a physical or station address that is usually imprinted on the NIC. The topics discussed in this section include: Packet Format Encapsulation Operation ARP over ATM Proxy ARP TCP/IP Protocol Suite

  5. Figure 7.3ARP operation TCP/IP Protocol Suite

  6. Figure 7.4ARP packet TCP/IP Protocol Suite

  7. Figure 7.5Encapsulation of ARP packet TCP/IP Protocol Suite

  8. Figure 7.6Four cases using ARP TCP/IP Protocol Suite

  9. Note: An ARP request is broadcast; an ARP reply is unicast. TCP/IP Protocol Suite

  10. Example 1 A host with IP address 130.23.43.20 and physical address B2:34:55:10:22:10 has a packet to send to another host with IP address 130.23.43.25 and physical address A4:6E:F4:59:83:AB (which is unknown to the first host). The two hosts are on the same Ethernet network. Show the ARP request and reply packets encapsulated in Ethernet frames. See Next Slide TCP/IP Protocol Suite

  11. Example 1 (Continued) SolutionFigure 7.7 shows the ARP request and reply packets. Note that the ARP data field in this case is 28 bytes, and that the individual addresses do not fit in the 4-byte boundary. That is why we do not show the regular 4-byte boundaries for these addresses. Also note that the IP addresses are shown in hexadecimal. For information on binary or hexadecimal notation see Appendix B. See Next Slide TCP/IP Protocol Suite

  12. Figure 7.7Example 1 TCP/IP Protocol Suite

  13. Figure 7.8Proxy ARP TCP/IP Protocol Suite

  14. 7.2 ARP PACKAGE In this section, we give an example of a simplified ARP software package to show the components and the relationships between the components. This ARP package involves five modules: a cache table, queues, an output module, an input module, and a cache-control module. The topics discussed in this section include: Cache Table Queues Output Module Input Module Cache-Control Module TCP/IP Protocol Suite

  15. Figure 7.9ARP components TCP/IP Protocol Suite

  16. Table 7.1 Original cache table used for examples TCP/IP Protocol Suite

  17. Example 2 The ARP output module receives an IP datagram (from the IP layer) with the destination address 114.5.7.89. It checks the cache table and finds that an entry exists for this destination with the RESOLVED state (R in the table). It extracts the hardware address, which is 457342ACAE32, and sends the packet and the address to the data link layer for transmission. The cache table remains the same. TCP/IP Protocol Suite

  18. Example 3 Twenty seconds later, the ARP output module receives an IP datagram (from the IP layer) with the destination address 116.1.7.22. It checks the cache table and does not find this destination in the table. The module adds an entry to the table with the state PENDING and the Attempt value 1. It creates a new queue for this destination and enqueues the packet. It then sends an ARP request to the data link layer for this destination. The new cache table is shown in Table 7.2. See Next Slide TCP/IP Protocol Suite

  19. Table 7.2 Updated cache table for Example 3 TCP/IP Protocol Suite

  20. Example 4 Fifteen seconds later, the ARP input module receives an ARP packet with target protocol (IP) address 188.11.8.71. The module checks the table and finds this address. It changes the state of the entry to RESOLVED and sets the time-out value to 900. The module then adds the target hardware address (E34573242ACA) to the entry. Now it accesses queue 18 and sends all the packets in this queue, one by one, to the data link layer. The new cache table is shown in Table 7.3. See Next Slide TCP/IP Protocol Suite

  21. Table 7.3 Updated cache table for Example 4 TCP/IP Protocol Suite

  22. Example 5 Twenty-five seconds later, the cache-control module updates every entry. The time-out values for the first three resolved entries are decremented by 60. The time-out value for the last resolved entry is decremented by 25. The state of the next-to-the last entry is changed to FREE because the time-out is zero. For each of the three pending entries, the value of the attempts See Next Slide TCP/IP Protocol Suite

  23. Table 7.4 Updated cache table for Example 5 TCP/IP Protocol Suite

  24. 7.3 RARP RARP finds the logical address for a machine that only knows its physical address. The topics discussed in this section include: Packet Format Encapsulation RARP Server Alternative Solutions to RARP TCP/IP Protocol Suite

  25. Note: The RARP request packets are broadcast; the RARP reply packets are unicast. TCP/IP Protocol Suite

  26. Figure 7.10RARP operation TCP/IP Protocol Suite

  27. Figure 7.11RARP packet TCP/IP Protocol Suite

  28. Figure 7.12Encapsulation of RARP packet TCP/IP Protocol Suite

  29. Page 177, Exercises 8,9,12,13. Homework TCP/IP Protocol Suite

More Related