1 / 6

Thermal Conductivities of Oven Mitts

Thermal Conductivities of Oven Mitts. Jordan Holmes Stephen Merrill. Objective. Our goal was to find the thermal conductivities (k) of different kinds of gloves. We tested the following: Conventional Oven Mitt Polymer Oven Mitt Snow Glove Dishrag . Procedure.

sharlan
Download Presentation

Thermal Conductivities of Oven Mitts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thermal Conductivities of Oven Mitts Jordan Holmes Stephen Merrill

  2. Objective Our goal was to find the thermal conductivities (k) of different kinds of gloves. We tested the following: • Conventional Oven Mitt • Polymer Oven Mitt • Snow Glove • Dishrag

  3. Procedure • We used an aluminum block to calculate the rate of heat transfer from the stove top. • Using this rate of heat transfer we measured the temperatures of the inside of each glove after reaching steady state in contact with the aluminum block. • We then calculated the thermal conductivity for each material.

  4. Measurements • Stove • T = 108°C • Aluminum Block • A = .051*.089 = .00454 m2 • L = .0126 m • T = 85°C • k = 237 W/m*K • Heat Transfer Rate • q = (108-85)*237*.00454/.0126 = 1964 W • Conventional Oven Mitt • T = 70°C • L = .0025 m • TAl = 85°C • Polymer Oven Mitt • T = 80°C • L = .003 m • TAl = 105°C Assumptions • Aluminum block is pure aluminum • Constant surface temperatures • Temperatures measured after 5 minutes • Snow Glove • T = 80°C • L = .0045 m • TAl = 105°C • Dishrag • T = 82°C • L = .0045 m • TAl = 111°C

  5. Results k = q*L/[A*(TAl –T)] • Conventional Oven Mitt • k = 1964*.0025/(.00454*15) = 72.1 W/m*K • Polymer Oven Mitt • k = 1964*.003/(.00454*17) = 76.34 W/m*K • Snow Glove • k = 1964*.0045/(.00454*25) = 77.9 W/m*K • Dishrag • k = 1964*.0045/(.00454*29) = 67.13 W/m*K

  6. Conclusion Most of these gloves have similar thermal conductivities but the snow glove is the most conductive. We concluded that a dishrag can be just as useful as an oven mitt or better for getting hot things out of the oven because it has a lower thermal conductivity.

More Related