1 / 96

Linking Granular Base/ Subbase Residual Deformations In NAPTF Pavement Test Sections to

Linking Granular Base/ Subbase Residual Deformations In NAPTF Pavement Test Sections to Transverse Rut Profiles. Phillip R Donovan & Erol Tutumluer. 2010 FAA WORLDWIDE AIRPORT TECHNOLOGY TRANSFER CONFERENCE AND EXPOSITION. Acknowledgments. Dr. Phillip R Donovan, Major, US Air Force

sharne
Download Presentation

Linking Granular Base/ Subbase Residual Deformations In NAPTF Pavement Test Sections to

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Linking Granular Base/Subbase Residual Deformations In NAPTF Pavement Test Sections to Transverse Rut Profiles Phillip R Donovan & Erol Tutumluer 2010 FAA WORLDWIDE AIRPORT TECHNOLOGY TRANSFER CONFERENCE AND EXPOSITION

  2. Acknowledgments • Dr. Phillip R Donovan, Major, US Air Force • FAA research funding provided for Center of Excellence for Airport Technology (CEAT) established at UIUC “Analysis of NAPTF Trafficking Dynamic Response Data for Pavement Deformation Behavior” • Dr. David Brill, FAA Tech Center • Dr. Gordon Hayhoe, FAA Tech Center

  3. Introduction • The NAPTF CC1 tests indicated that applying a sequential offset load (wander) pattern to thinly surfaced asphalt pavements could reduce or even negate immediate surface deformations • The downward residual deformation caused by a pass of heavily loaded gear carriage was canceled by the upward residual deformation (heave) resulting from the pass of the same gear offset by wander (Hayhoe & Garg, 2002)

  4. Stresses Beneath Moving Wheel (Brown & Chan 1996, Lekarp et al. 2000, Hornych et al. 2000, Kim & Tutumluer 2006)

  5. Stresses Beneath Offset Moving Wheel sh > sv σ1 σ3 σ3 σ1 σ3 Wander Offset σ1 Offset wheel loads can potentially shift & rearrange unbound aggregate materials horizontally & increase damage to the system

  6. NAPTF Wander Position & Direction W-E North Lane 2 1 South Lane E-W

  7. Objective of Paper Use Multi-Depth Deflectometer (MDD) & transverse profile data from NAPTF CC1 tests to estimate P209/P154 base/subbase permanent deformation trends & accumulation rates due to traffic loading applied with wander

  8. NAPTF – Test Measurements - MDDs 5 in. (127 mm) P401 Surface 5 in. (127 mm) P401 Surface 5 in. (127 mm) P401 Surface 5 in. (127 mm) P401 Surface 5 in. (127 mm) P401 Base 5 in. (127 mm) P401 Base 8 in. (203 mm) P209 Base 8 in. (203 mm) P209 Base 8 in. (203 mm) P209 Base 12 in. (305 mm) P154 Subbase 30 in. (762 mm) P209 Subbase 36 in. (914 mm) P154 Subbase 102 in. (2591 mm) Medium Strength Subgrade CBR – 8% 95 in. (2413 mm) Medium Strength Subgrade CBR – 8% 104 in. (2642 mm) Low Strength Subgrade CBR – 4% 95 in. (2413 mm) Low Strength Subgrade CBR – 4% MFC MFS LFS LFC MDD Sensor

  9. Development of Residual & Permanent Deformation Basins

  10. Definition of Residual and Rebound 6-wheel dual-tridem (B777 type) gear Begin avg & Max Residual End avg Rebound Min

  11. Transverse Surface Profiler (TSP) Permanent 28 passes NAPTF CC1 MFC Section 6-wheel gear 5,001 passes 10,202 passes 12,952 passes Max Coverage Location MDD Location

  12. NAPTF Residual Transverse Profiles

  13. Wander Distribution 66 passes

More Related