1 / 13

New Build Up Process

New Build Up Process. Neo Manhattan Bump Interconnection (NMBI). NMBI Bumped Cu Foil Process Comparison NMBI Key Features, Design Features Substrate Technical Trend. 7/24. LG Electronics / DMC Div. NMBI. NMBI - Etched Cu Bump with Cu Foil. NMBI. Cu Foil. NMBI Cu Bump(SEM). Cu Bump.

sidney
Download Presentation

New Build Up Process

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. New Build Up Process Neo Manhattan Bump Interconnection (NMBI) • NMBI Bumped Cu Foil • Process Comparison • NMBI Key Features, Design Features • Substrate Technical Trend 7/24 LG Electronics / DMC Div.

  2. NMBI NMBI - Etched Cu Bump with Cu Foil NMBI Cu Foil NMBI Cu Bump(SEM) Cu Bump NMBI + B2it NMBI Mass Lam (2+2+2) 8/24 LG Electronics / DMC Div.

  3. NMBI New Development of Core PCB Interconnect Method A very stable electrical & Mechanical interconnect structure has been achieved Cu/Cu Metallic Connection Zoom in • High Reliability compared to • convention Cu plated TH, • Fine Interconnection for • High Density PCB 9/24 LG Electronics / DMC Div.

  4. NMBI Production Process Comparison Process Photo-via,Laser-via B2it(Toshiba) NMBI + B2it Cross section Diagram • Min via Dia. • Min Land Dia. • Stacked Via Φ 200 ㎛ Φ 300 ㎛ Possible Φ 150 ㎛ Φ 300 ㎛ Impossible Less than Φ 100 ㎛ Less than Φ 200 ㎛ Possible • Simplified process enables cost reduction • Enables easier stacking of via Strong points • Enable easier reduction • of via sizes • One-step batch processing • of various via sizes Weak points Difficult to reduce via diameter Not possible to form via of difference size in a one-step process Numerous process steps Significant time required for via formation Significant capital investment required for laser equipment Thermal excursions and surface planarization induce dimensional instability, making multi-layer build -up structures more difficult to fabricate 10/24 LG Electronics / DMC Div.

  5. NMBI 12/24 LG Electronics / DMC Div.

  6. NMBI 13/24 LG Electronics / DMC Div.

  7. NMBI High Density Design • Land-less • Fine Pitch Pattern • Fine Pitch Bump(Via) NMBI - Land-less Laser Via Number of Lines 14/24 LG Electronics / DMC Div.

  8. NMBI(Key Feature) 15/24 LG Electronics / DMC Div.

  9. NMBI(Key Feature) 16/24 LG Electronics / DMC Div.

  10. NMBI NMBI(Key Feature) 17/24 LG Electronics / DMC Div.

  11. NMBI NMBI(Key Feature) 18/24 LG Electronics / DMC Div.

  12. NMBI 19/24 LG Electronics / DMC Div.

  13. Reliability Test Results Spec. No Item Condition Result 1 Peel Strength Peeling Speed 500mm/min 1.0kg/cm OK OK 2 Insulating Voltage DC500V, 60sec No damage OK 3 Pads Pull Strength 90/ Pull head Speed :10mm/min 2kg/mm2 4 260℃(10sec)⇔20℃(20sec) 100Cycle Conductivity Changing Ratio less than 10% OK Hot Oil (Thermal Shock) Conductivity Changing Ratio less than 10% 5 OK Bending ±10% Bending 100 Cycle OK 6 2mOhm/Via Via Resistance 20/24 LG Electronics / DMC Div.

More Related