1 / 45

MPCP (Multipoint Control protocol)

MPCP (Multipoint Control protocol). Professor : Ho-Ting Wu Speaker : 簡睿毅. Outline. Overview EPON MPCP Summary. Outline. Overview EPON MPCP Summary. PON (Passive Optical Network ). Features of a passive optical network:

tahir
Download Presentation

MPCP (Multipoint Control protocol)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MPCP (Multipoint Control protocol) Professor : Ho-Ting Wu Speaker : 簡睿毅

  2. Outline • Overview EPON • MPCP • Summary

  3. Outline • Overview EPON • MPCP • Summary

  4. PON (Passive Optical Network ) • Features of a passive optical network: • an attractive solution to implement FTTB (fiber to the build) and FTTH (fiber to the home)access networks FTTH deployment scenarios • a point-to-multipoint optical network • only passive optical components: • Couplers and Splitters • two primary types of PON technologies: • ATM PON (APON) • Ethernet PON (EPON)

  5. Architecture of PONs OLT: Optical Line Terminal ONU: Optical Network Unit

  6. Ethernet PON • EPON started to be standardized by IEEE 802.3ah EFM since 2001 • Ethernet is a ubiquitous technology: deployed widely in LAN, MAN and WAN • Ethernet is more attractive to PON than ATM • high speed: up to 10 Gigabit/s • lower cost of Ethernet equipments than those of ATM • easier interoperability than that in ATM • lower overhead

  7. Features of Ethernet PON • All data packets carried in EPON are encapsulated in Ethernet frames • Broadcasting in the downstream direction from the OLT to ONUs • Sharing the upstream channel capacity among ONUs • Collision will occur when different ONUs transmit data simultaneously • Method is needed for multiple access — Medium Access Control (MAC) protocols

  8. Downstream traffic in EPON

  9. Upstream traffic in EPON

  10. Outline • Overview EPON • MPCP • Summary

  11. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  12. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  13. Basic Characteristics • The Multi-Point Control Protocol (MPCP) specifies a control mechanism between a Master unit and Slaves units connected to a Point-to-Multi-Point (P2MP) segment to allow efficient transmission of data • MPCP is implemented in MAC Control layer • MPCP uses five MAC Control messages - GATE, REPORT, REGISTER_REQ,REGISTER,REGISTER_ACK

  14. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  15. Two mode of operation • Auto Discovery mode - to detect newly connected ONUs and learn the round-trip delay and MAC address of that ONU • Normal mode - to assign transmission opportunities to all initialized ONUs

  16. Auto Discovery mode (1/2) • OLT allocates an initialization slot, an interval of time when no previously initialized ONUs are allowed to transmit • OLT sends an initialization GATE message advertising the start time of the initialization slot and its length • Only un-initialized ONUs will respond to the initialization GATE message

  17. Auto Discovery mode (2/2) • When the local clock located in the ONU reaches the start time of the initialization slot ,the ONU will transmit its own message (initialization REPORT) • When the OLT receives the REPORT from an un-initialized ONU, it learns its MAC address and round-trip time

  18. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  19. Discovery Protocol • Four MAC control messages – Discovery GATE: Creates transmission opportunity for undiscovered devices – Register_Request: ONU response to “Discovery Gate” – Register: OLT response to Register_Request – Register_Ack: ONU response to Register • ONUs can wake-up Simultaneously – Protocol must deal with contention in Register_Requests • Multiple ONUs can potentially be registered within single Discovery time period

  20. Auto Discovery

  21. ONU Behavior During Discovery • At Power-up / Reset, an ONU enters Discovery State: – Undiscovered ONUs Await Reception of “Discovery Gate” message from OLT • Unregistered ONU responds only: – If received message’s Logical Link ID(LLID) matches discovery/default LLID and the grant type is discovery

  22. OLT Behavior During Discovery • OLT Must Periodically Reserve Time Periods for Discovery –The Frequency of discovery windows can be chosen for desired overhead • Since Undiscovered ONU Addresses are Unknown – “Discovery Gates” are broadcast to all ONUs

  23. Failure Modes • OLT assumes ONU is unregistered if: – REGISTER_ACK message wasn’t received at the first grant opportunity – ONU responds to “Discovery GATE” messages • ONU assumes it is unregistered if: – After sending a REGISTER_REQUEST message, it receives a “Discovery GATE” before receiving a REGISTER message – After sending a REGISTER_ACK message, it receives a “Discovery GATE” before receiving a “Normal GATE” message

  24. Resolving Discovery Contention • Some sort of randomization must be applied to ONU Register messages to minimize collisions

  25. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  26. RTT measurement

  27. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  28. Messages Format • OLTONU GATE , REGISTER • ONUOLT REPORT , REGISTER_REQUEST , REGISTER_ACK • Used only during discovery process REGISTER,REGISTER_REQUEST , REGISTER_ACK

  29. GATE/REPORT Behavior • Protocol layer conveys information - OLTONU bandwidth assignment - ONU OLT bandwidth request • Service layer sitting above makes decisions - OLT bandwidth allocation - ONU bandwidth utilization • OLT sends GATE messages to ONU and guarantees no overlaps

  30. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  31. GATE Operation(1/2)

  32. GATE Operation(2/2) • ONU transmits only during the time indicated in the GATE • ONU MAC-control enables PHY transmission at the start of a GATE duration and disables it at the end of the GATE duration • GATE messages can be used with timestamps only

  33. REPORT Operation(1/3)

  34. REPORT Operation(2/3) • REPORTs are generated in ONU MAC control client - Indicate local conditions to OLT • REPORTs pass through the MAC-control • REPORTs are optional

  35. REPORT Operation(3/3) • A REPORT message may contain queue reports • The OLT must process REPORT messages • The OLT may consider the REPORT when allocating bandwidth • The ONU must issue REPORTs periodically • REPORT messages can be used with timestamps only

  36. MPCP (Multipoint Control protocol) • Introduction • Two mode of operation • Discovery Protocol • RTT (Round-trip time) measurement • Messages Format • Messages Operation • MPCP-Goals

  37. MPCP- Goals • Optimize Network Resources • Address Service Provider Requirements

  38. Outline • Overview EPON • MPCP • Summary

  39. Point-to-Point Emulation (PtPE)

  40. Shared-Medium Emulation (SME)

  41. Combined PtPE and SME Mode

  42. Summary • MPCP is compliant with deployed Ethernet by using P2P Emulation layer • An 802.3ah point-to-multipoint network is a layer 2 domain with a Bridge at the OLT having a direct link to each ONU • Traditional Ethernet framing is maintained Peer-to-peer communications can be disabled at bridge • MPCP is confined to one sub-layer – MAC Control • MPCP allows higher layer to implement various DBA algorithms

  43. Reference • Ethernet Passive Optical Network (EPON) Glen Kramer, University of California, Davis Biswanath Mukherjee, University of California, Davis Ariel Maislos, Passave Networks, Israel • Supporting differentiated classes of service in Ethernet passive optical networks Glen Kramer and Biswanath Mukherjee , University of California, Davis Sudhir Dixit and Yinghua Ye , Center, 5 Wayside Road, Burlington Ryan Hirth , Communications, 755 Baywood Drive, Petaluma

More Related