1 / 4

Light Instability of QC Lasers

Light Instability of QC Lasers. Yuting Huang , 1 Yu Yao, 1 Kais Al- Naimee , 1,2 and Claire Gmachl 1 1 – Department of Electrical Engineering and MIRTHE, Princeton University, Princeton, NJ 08544 USA, and NSF-ERC, USA

tanaya
Download Presentation

Light Instability of QC Lasers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Light Instability of QC Lasers Yuting Huang,1 Yu Yao,1Kais Al-Naimee, 1,2 and Claire Gmachl1 1 – Department of Electrical Engineering and MIRTHE, Princeton University, Princeton, NJ 08544 USA, and NSF-ERC, USA 2 – Permanent address : National Institute of Applied Optics, Phys. Dep., University of Florence, Florence, Italy

  2. Why Investigate Light Instability? • Power Instability has long been a known problem in traditional lasers but not in high profile QC lasers. 1 • Finding potential quasi-period behaviors of light instability can help make much more powerful lasers by stabilizing them on the higher power state. Fig 1. Zooming in on 7 sequential • light pulses out of 5000 pulses in P2 Laser3. . 1. K.J. Franz, J.J.J. Raftery, P.Q. Liu, A.J. Hoffman, M.D. Escarra, S.S. Howard, Y. Dikmelik, J.B. Khurgin, X. Wang, J.-Y. Fan, C. Gmachl "Negative Differential Resistance and Pulse Instabilities in Minimalized Quantum CascadeLaser Structures," Conference on Lasers and Electro-Optics (CLEO), Baltimore, MD,June 2009.. Fig 2 shows around 100 light pulses at I = 0.7 A, the current for stable light output. Fig 3 shows around 160 light pulses at I = 2.4 A, the current for extremely unstable light output.

  3. Program and Setup • (The figure above) Easy-to-use Matlab interface monitors up to 5,000 sequential pulses • plots light output instability in the gate regions. • In the right figure a laser holder is shown. The laser is opposite to a light detector, a voltage generator, an oscilloscope and the computer.

  4. Light Instability in Gated Regions • We choose the region of instability on each pulse as the gate region. • (In the above figure) Gate region is between the red lines. • (In the right figure) Data calculated by averaging the light power output in the gate region on each pulse may reveal the light instability pattern hidden in QC laser. • Conclusion We succeeded in developing a real time, pulse by pulse measurement system that allows monitoring laser dynamics and chaos.

More Related