1 / 14

Advanced Optical Technologies for Data Intensive Applications

Advanced Optical Technologies for Data Intensive Applications. Kim Roberts iGrid 2005. How do I optically switch my Lightpaths?. Need to have each wavelength arriving at a node be able to leave via any of four other optical lines, or drop locally. Must be low cost. Local Add Drop.

tokala
Download Presentation

Advanced Optical Technologies for Data Intensive Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Advanced Optical Technologies for Data Intensive Applications Kim RobertsiGrid 2005

  2. How do I optically switch my Lightpaths? • Need to have each wavelength arriving at a node be able to leave via any of four other optical lines, or drop locally. • Must be low cost Local Add Drop

  3. Wavelength Selective Switch • One fiber in, five fibers out. • Individually cross-connects 80 wavelengths

  4. TWc SMF-28 TWc E-LEAF SMF-28 E-LEAF SMF-28 E-LEAF Hurdle: Fiber Dispersion Management ROADM Photonic Cross-Connect Photonic Cross-Connect Photonic Cross-Connect Bulk dispersion compensation will not suffice

  5. Electronic Dispersion Precompensation OSNR vs. distance (10E-3 BER; 10 Gb/s) Simple Rx BAD 3 bit MLSE 5 bit MLSE Tx pre-comp (IM-DD) Tx pre-comp (DPSK) GOOD Optical Dispersion Compensation is Obsolete

  6. Transmitter Pre-compensation Rx Tx Optical modulator CD-1 D/A Digital data Recovered data D/A 0 laser

  7. How can I eliminate latency?ARQ buffer latency grows with round trip time.

  8. Uncoded BCH-1 G.975 BCH-3 BCH-20 Wraptor Forward Error Correction • FEC eliminates Bit Errors • Lightpaths with no packet loss

  9. How do I send a large data set to several destinations?

  10. Layer 1 Multicast • One layer 1 switch: • 50 Mb/s 70,000 ways, • 240Gb/s streams 15 ways • Demo US110 (hardware capacity) HDX Up to 1.28 Tb/s single shelf 3.84 Tb/s as a hub HDXc Up to 640 Gb/s OME Up to 160 Gb/s

  11. How can I secure my Lightpath? • Prevent interception of valuable IP or secret information. • Movie production, government, healthcare, finance, corporate • Preclude alteration or insertion of false data • Banking, government

  12. Lightpath Encryption Demo US106 • Full OC-192/STM-64 10G throughput. • One to twelve lightpaths with separate keys. • 12 x GigE used to heavily load the OC-192 as 12xSTS-1-16V • 400 ns added latency for AES-256 encryption • Another 400 ns for decryption • Integrated into the Nortel OME-6500 transport shelf. • Packet by packet encryption • No encryption of idle frames • No overhead added to each packet

  13. Your Challenge • Most protocols are designed for lousy connections • How can you exploit Lightpaths that are: • Wavelength switched to your destination • Independent of optical physics • Free of packet loss • Layer 1 multicast • Securely encrypted • 40 Gb/s

More Related