1 / 12

Lighting and Adjusting a Bunsen Burner Flame

Step 1. Make sure your safety goggles are on and your hair is tied back.the gas outlet, the gas adjustment and the air adjustment should all be in the closed or off position. Step 2. Check to see if the other person sharing your outlet has closed their gas adjustment on their Bunsen burneropen

topanga
Download Presentation

Lighting and Adjusting a Bunsen Burner Flame

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Lighting and Adjusting a Bunsen Burner Flame

    2. Step 1 Make sure your safety goggles are on and your hair is tied back. the gas outlet, the gas adjustment and the air adjustment should all be in the closed or off position

    3. Step 2 Check to see if the other person sharing your outlet has closed their gas adjustment on their Bunsen burner open the gas outlet at the wall

    4. Step 3 open the gas adjustment on your Bunsen burner

    5. Step 4 Hold the striker over the barrel to catch gas in the cup squeeze the striker repeatedly until the Bunsen burner lights

    6. Step 5 When the Bunsen burner lights, the flame will be yellow and too tall. Open the air adjustment and add air until the flame is light blue and has a good inner and outer cone

    7. Step 6 If the flame begins to make a rattling sound you have added too much air and the burner is about to go out. Close the air adjustment until the flame is quiet.

    8. Step 7 Finally, use the gas adjustment to adjust the size of the flame to about 2 inches in height.

    9. Step 8 If you have ANY problems, close the gas outlet and call the teacher

    10. Parts of a Bunsen Burner

    11. Parts of a properly adjusted flame

    12. Temperature of a Methane Flame

More Related