1 / 28

Lecture 10.0

Lecture 10.0. Photoresists/Coating/Lithography. Semiconductor Fab. Land $0.05 Billion Building $0.15 Billion Tools & Equipment $1 Billion Air/Gas Handling Sys $0.2 Billion Chemical/Electrical Sys $0.1 Billion Total $1.5 Billion 10 year Amortization ~$1 Million/day.

umika
Download Presentation

Lecture 10.0

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 10.0 Photoresists/Coating/Lithography

  2. Semiconductor Fab • Land $0.05 Billion • Building $0.15 Billion • Tools & Equipment $1 Billion • Air/Gas Handling Sys $0.2 Billion • Chemical/Electrical Sys $0.1 Billion • Total $1.5 Billion • 10 year Amortization ~$1 Million/day

  3. 80nm Line width with =193 nm Lithography

  4. Photoresist -Sales $1.2 billion/yr. in 2001 • Resins • phenol-formaldehyde, I-line • Solvents • Photosensitive compounds • Polymethylmethacrylate or poly acrylic acid • = 638 nm RED LIGHT • diazonaphthoquinone • Hg lamp, = 365 nm, I-line • o-nitrobenzyl esters – acid generators • Deep UV, = 248 nm, KrF laser • Cycloolefin-maleic anhydride copolymer • Poly hydroxystyrene • =193 nm gives lines 100 nm • = 157 nm F laser • Additives

  5. Photoresist • Spin Coat wafer • Dry solvent out of film • Expose to Light • Develop • Quench development • Dissolve resist (+) or developed resist (-)

  6. Spin Coating • Cylindrical Coordinates • Navier-Stokes • Continuity

  7. Navier-Stokes

  8. Spin Coating Dynamics

  9. Newtonian Fluid-non-evaporating If hois a constant film is uniform For thin films, h  -1 t-1/2

  10. Evaporating Model - Heuristic Model • CN non-volatile, CV volatile • e= evaporation • q= flow rate

  11. Spin Coater - Heuristic Model • Flow Rate, h is thickness • Evaporation rate due to Mass Transfer

  12. Spin Coating Solution • Dimensionless Equations

  13. Viscosity increases with loss of solvent • Viscosity of pure Resin is very high • Viscosity of Solvent is low

  14. Spin Coating • Thickness  RPM-1/2 o1/4 • Observed experimentally

  15. Results • Effect of Mass Transfer •  = dimensionless Mass transfer Coefficient • Increase MT  Increase in Film Thickness • MT increases viscosity and slows flow leading to thicker film Dimensionless Film Thickness

  16. Dissolve edge of photoresist • So that no sticking of wafer to surfaces takes place • So that no dust or debris attaches to wafers Wafer with Photoresist

  17. Light Source Lithography • Light passes thru die mask • Light imaged on wafer • Stepper to new die location • Re-image Mask Reduction Lens Wafer with Photoresist

  18. Lithography • Aspect Ratio (AR)=3.5 • AR=Thickness/Critical Dimension • Critical Dimesion=line width • Thickness= photoresist thickness • Lateral Resolution (R) • R=k1/NA • Numerical Apparature (NA) • NA is a design parameter of lens • Depth of Focus (DOF) • DOF= k2/NA2

  19. Lithography - Photoreaction • Photo Reaction Kinetics • dC/dt = koexp(-EA/RT) C I(x,) • Beer’s Law • I(x, )/Io=exp(- () C x) • () = extinction coefficient • Solution? • dC/dt = koexp(-EA/RT) C Io exp(- () C x) • C=Co at t=0, 0<x<L

  20. Drying solvent out of Layer • Removal of Solvent • Simultaneous Heat and Mass Transfer • In Heated oven • Some shrinkage of layer

  21. Positive Light induced reaction decomposes polymer into Acid + monomers Development Organic Base (Tri Methyl ammonium hydroxide) + Water neutralizes Acid group Dissolves layer Salt + monomer Negative Light induced reaction Short polymers crosslink to produce an insoluble polymer layer No Development needed Dissolution of un- reacted material Photoresist

  22. Photoresist Development • Boundary Layer Mass Transfer • Photoresist Diffusion • Chemical Reaction • Product diffusion, etc. Reactant Concentration Profile Product Concentration Profile Reaction Plane

  23. Rate Determining Steps X

  24. Dissolution of Uncrosslinked Photoresist • Wafers in Carriage • Placed in Solvent • How Long?? • Boundary Layer MT is Rate Determining • Flow over a leading edge for MT • Derivation & Mathcad solution Also a C for the Concentration profile

  25. Mass transfer correlation - flow over leading edge • Sh=Kgx/DAB • Kg= DAB / C • Sc=/DAB • Re=V x/

  26. Global Dissolution Rate/Time • Depends on • Mass Transfer • Diffusion Coefficient • Velocity along wafer surface • Size of wafer • Solubility • Density of Photoresist Film

  27. Local Dissolution Rate/Time • Depends on • Mass Transfer • Diffusion Coefficient • Velocity along wafer surface • Size of wafer • Solubility • Density of Photoresist Film • Position on the wafer

More Related