1 / 14

Chapter 27 STATIC-INDUCTION TRANSISTOR

Chapter 27 STATIC-INDUCTION TRANSISTOR. 의료영상 연구실 나기은 2003.05.31. HISTORY. 1972 : The static-induction transistor(SIT) was introduced by Nishizawa el al . 1975 : More studies were reported by Ogawa et al. and Yamaguchi et al. 1952 : Shockley proposed the analog transistor.

val
Download Presentation

Chapter 27 STATIC-INDUCTION TRANSISTOR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 27 STATIC-INDUCTION TRANSISTOR 의료영상 연구실 나기은 2003.05.31.

  2. HISTORY • 1972 : The static-induction transistor(SIT) was introduced by Nishizawa el al. • 1975 : More studies were reported by Ogawa et al. and Yamaguchi et al. • 1952 : Shockley proposed the analog transistor. • 1963 : Roosild et al.– Realization of a vertical structure • 1964 : • Buchanan et al.– Experimental results • Teszner, Gicquel - Other devices include • Zuleeg, Hinkle - Multichannel FET • The mid-1980s : The SIT began to be produced in the commercial market.

  3. STRUCTURE • All but Fig. 27.1(d) have vertical current flow. • The buried-gate structure is the scheme proposed originally • The planar-gate structure in Fig. 27.1(b) is probably the mist common today. • The critical parameters • The spacing between gates(2a). • The channel doping level(ND).

  4. The doping The depletion regions from the gates do not merge There exists a narrow, neutral channel opening with zero gate bias. Gaps are a few microns, with channel doping levels around the range. The gates are formed by p-n junctions. The SIT operations can be generalized to include metal gates or MIS gates. depletion regions STRUCTURE

  5. CHARACTERISTICS • SIT is a JFET or MESFET • Super-short channel length • Multiple channels connected in parallel • Difference • The gates do not extend close to the source or drain • Punch-through occurs with high drain bias even if the transistor is turned off

  6. CHARACTERISTICS • The depletion regions around the gates do not pinch off the gap • This condition  (27.1) • The built-in potential of the p-n junction •  (27.2) • A neutral region between the gates with zero gate bias provides a current path for a depletion-mode device • The current conduction is drift in nature and is similar to an FET

  7. CHARACTERISTICS • With negative gate bias • The depletion regions widen • Pinch off the channel • Electrons from the source start to see a potential barrier • This begins when the gate voltage is more negative than • The pinch-off voltage VP is given by (27.3) (27.4)

  8. CHARACTERISTICS • Negative gate voltage raises the barrier • Positive drain voltage lowers the barrier • The efficiency by which the terminal voltages affect the barrier is indicated by (27.5) (27.6)

  9. CHARACTERISTICS • The factors and are geometry dependent • Different for different structures in Fig 27.1 • example (27.7) (27.8)

  10. CHARACTERISTICS • The current of an SIT is given by the form • is the doping concentration is the source • The term is the carrier diffusion velocity • When becomes small giving a current of • The barrier height is given by (27.9) (27.10) (27.11)

  11. CHARACTERISTICS • Diffusion current is exponential with • The current can be put in the form • The I-V characteristics have the form (27.12) (27.13) (27.14) (27.15)

  12. CHARACTERISTICS • Another mode of operation is the bipolar-mode SIT(BSIT) • The gap is smaller • The doping in the channel is lower (27.16) • The output characteristics of a BSIT

  13. APPLICATIONS • Combination of high voltage, high speed capability • Most applications of the SIT are in the power area. • Low noise, low distortion, and low output impedance • It can be used in high-power oscillators of microwave equipment

  14. SIT는높은파워, 높은주파수, 높은온도application을위한short channel FET 구조이다 • SI(Static Induction)소자는 접합게이트에 인가하는 전압에 의해 에미터전류를 제어하는 전압제어형 소자로서, SI Transistor는 수10㎒의 고주파 발진기나 증폭기등에 이용되는 고속용소자인 한편, SI-Thyristor는 고내압용으로 적합하고, GTO보다 고속이며 dv/dt 및 di/dt 내량이 우수하기 때문에 고내압ㆍ고속의 스위치로 인버터 등에 주로 사용되고 있다. • 현재 4㎸/400A의 역도통 SI 싸이리스터가 사용되고 있지만 4.5㎸/1㎄급 용량의 소자의 개발을 목전에 두고 있다. • 이러한 SIT의 특징을 다음과 같이 요약할 수 있다. • - 유니폴라 스위치로써 Tail전류가 작고, 고속 스위칭동작이 가능하다. • - 고내압/대용량의 제품제작이 가능하고, 전력밀도를 높일 수 있다. • - 파워 MOSFET와 비교해서 On저항이 크고 도통손실도 많지만, SIT는 병렬접속이 용이함으로써, 병렬 합성저항을 저하시킬 수 있어 대전류화가 가능하다. • - 파워 MOSFET과 비교해 체널부분의 구조가 단순하므로 전류써지에 강하다. • - 구동ㆍ보호회로가 복잡해진다. • SIT는 이러한 특징에 의해, 정격이 큰 소자는 주파수가 100㎑∼400㎑대의 대전력 인버터에 사용되며, 특히 고주파특성을 개선한 소자는 ㎒대의 고주파 인버터에 사용이 가능하다.

More Related