1 / 12

C 7.3: Drag Force of a Sign Mounted on a Moving Vehicle

C 7.3: Drag Force of a Sign Mounted on a Moving Vehicle. Rebecca Currier February 15, 2007 BIEN 301- Individual Project. The problem. Pizza delivery sign mounted on car going 40 mph

yehuda
Download Presentation

C 7.3: Drag Force of a Sign Mounted on a Moving Vehicle

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. C 7.3: Drag Force of a Sign Mounted on a Moving Vehicle Rebecca Currier February 15, 2007 BIEN 301- Individual Project

  2. The problem • Pizza delivery sign mounted on car going 40 mph • If the sign is mounted facing bluntly into the wind, how much will that effect the drag force as opposed to putting the sign parallel to the wind?

  3. Given • Sign is 1.5 ft by 5 ft (7.5 feet2) • Kinematic viscosity of air: 1.61e-4 ft2/s • Density of air: 2.34 e-3 slug/ft3 • CD of car is 0.4 • A of car is 40 ft2 • Rolling resistance is 40 lbf • Car provides 10 hp / gal gas / hr

  4. Required • (a) Drag on sign alone in both orientations • (b) Total drag on car and sign in both orientations • (c) Horsepower required by engine to drive car in both orientations • (d) Fuel efficiency in mi/gal for both orientations

  5. Assumptions • Standard temperature and pressure • Airflow around car is turbulent and viscous • Car has no acceleration • One dimensional airflow • When sign faces parallel to wind, identical boundary layers form; when sign faces bluntly into the wind, boundary layer forms on each side of sign

  6. Setting it up • A// = 7.5 ft2, Af = 15 ft2 (two boundary layers) (7.45 for flat plate in turbulent flow) CD// = 0.004, CDf = 1.19 (Table 7.3 for rectangular flat plate flow, b/h = 5/1.5)

  7. Drag forces • FDfsign = 71.96 lbf • FD//sign = 0.12 lbf (7.62), therefore For drag on sign + car, simply add CDs and Areas together in equation • FDf = 346.52 lbf • FD// = 76.04 lbf

  8. Power • Pf = 378 hp • P// = 114 hp

  9. Fuel efficiency • FEf = 1.1 mi/gal • FE// = 3.5 mi/gal

  10. Conclusion • Mounting sign parallel to wind reduces large drag force to almost nothing • Drag force with sign into wind adds a huge force to the car, almost twice as large as the rolling resistance • Even with minimized drag, 10 hp is not enough to power this car efficiently

  11. Biomedical Application • This problem illustrates the important effects of orientation on drag. • When placing a catheter into blood flow, an engineer must carefully design both the catheter and the insertion device so that the implanted object is properly orientated to minimize drag.

  12. Questions?

More Related