1 / 34

Advances in Wastewater – The Benefits to the GCC Region

Jonathan Bishop , Middle East Unit Water and Wastewater Process Manager. Advances in Wastewater – The Benefits to the GCC Region. Introduction. Odour Control Anaerobic Digestion Enhanced Treatment Nutrient removal Ammonia – standard in region Total Nitrate Phosphate

Download Presentation

Advances in Wastewater – The Benefits to the GCC Region

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Jonathan Bishop, Middle East UnitWater and Wastewater Process Manager Advances in Wastewater – The Benefits to the GCC Region

  2. Introduction • Odour Control • Anaerobic Digestion • Enhanced Treatment • Nutrient removal • Ammonia – standard in region • Total Nitrate • Phosphate • Biological Nutrient Removal • Recent Case Study

  3. Odour Control

  4. Odour • Result of biological activity on proteins and other substances in the wastewater in the absence of oxygen • Odorants generated comprise volatile organic compounds and gaseous inorganic compounds such as hydrogen sulphide (H2S) and ammonia (NH3) • Major sources of odour at typical wastewater treatment facilities include: • Pumped Sewers • Inlet Works including screens • Primary Settlement Tanks/Clarifiers • Sludge and return liquor treatment areas

  5. Odour- Analysis and Predictions • Dispersion models required to convert measured or calculated odour emission rates to atmospheric odour concentrations • 2 popular models available – AERMOD and ISC • AERMOD is recommended by the US EPA • AERMOD requires terrain and meteorological data for accurate predictions. Graphical Model Interface

  6. Odour- Analysis and Predictions • Model outputs are in the form of diagrams showing likely (98 percentile) atmospheric odour concentrations. • Wind roses show prevalent wind direction for the area under assessment.

  7. Dedicated Odour Control and Abatement Equipment include: Dry absorbers such as carbon filters Bio-filters and Bio-scrubbers that utilise biomass on a structured media bed. Chemical Scrubbers that utilise acids/alkalis and oxidants. Incinerators or thermal oxidisers that oxidise odorants in foul air. Masking Sprays may also be used to mask Odour- Control, Treatment and Abatement

  8. Odour- Control, Treatment and Abatement

  9. Anaerobic Digestion

  10. What is Anaerobic Digestion? Conversion of organic matter to methane and carbon dioxide in the absence of oxygen. C5H702N+6H20 5CH4 + 2NH3 + 5CO2 + Biogas Produces stabilised residual solids. Biogas comprises approximately 60 to 65%CH4, 30 to 35%CO2 and other gasses.

  11. Typical AD system • Effective gas mixing • Effective external heat exchangers • 15 day retention • Continuous feeding

  12. Enhanced AD System • Effectivejetmixing • Effective external heat exchangers • 12 day retention • Continuous feeding Pre-treatment

  13. What does Pre-treatment do? • Increase pathogen destruction • Compliance with microbial standards eg US EPA Class A • Safe use of sludge in agriculture • Applicable to wider range of crops • Secure agricultural disposal route • Increase solids destruction • Increased Bio-Gas production • Increased power generation through CHP • Reduced amount of sludge requiring disposal

  14. Reaction Steps in AD slowest step Step 1: hydrolysis starch  sugars Step 2: acidification sugars  VFAs Step 3: acetogenesis VFAs  acetates Step 4: methanogenesis acetates  biogas

  15. Reaction Steps in AD with Pre-Treatment pre-treatment AD hydrolysis hydrolysis pH = 5.0 to 5.5 acidification acidification pH ~ 7.0 to 7.5 acetogenesis methanogenesis

  16. Methods of Pre-treatment • Biological • Thermal • Chemical • Mechanical (high shear, grinding) • Ultrasonic

  17. Typical Biological System cold water raw sludge 55oC Ht Ex 3 42oC 42oC 42oC 55oC pre-treated sludge to AD reactor 55oC Ht Ex 1 Ht Ex 2 total retention = 2 days hot water

  18. Case Study-Kings Lynn STC, United Kingdom • Sludge Throughput = 14,500 to 19,000tDS/year • Proportion of primary to WAS = 50:50 to 35:65 • Pre-treatment = Biological • Volatile Solids Destruction = 50 to60%

  19. Case Study-Kings Lynn STC, United Kingdom Enough power generated to support the Wastewater Treatment Plant and export to the grid

  20. Why Adopt AD in the GCC? • Slow uptake of anaerobic technologies in the region. • WHY? • Cheap Energy - More expensive to recover energy from anaerobic digestion than have energy supplied from the grid/other sources. • BUT • Landfill - There will eventually be constraints on space for landfills which is currently the preferred disposal route for sludge solids • OTHER POSSIBLE DRIVERS • Fertiliser - Anaerobically digested sludge solids could be used as fertiliser if appropriate legislation and regulations are in place. • Sustainable - Sustainable source of energy.

  21. Nutrient Removal

  22. Nutrient removal - Introduction • Essential nutrients for plant growth: • Nitrogen – Ammonia, Nitrate • Phosphorous in the form of Orthophosphate • Nutrients are usually limited in natural waters and hence restrict plant and algae growth • Free fertiliser where TSE is re-used to irrigate plants

  23. Why use nutrient removal in GCC? • Chlorine disinfection – Ammonia removal required • Coastal discharges • Prevention of eutrophication where: • TSE is re-used for lakes and water features • Storage in lagoons is primary disposal outlet for TSE.

  24. Nutrient Removal – Ammonia • Most plants in region are designed to meet re-use standards • Normally will also achieve ammonia removal as well • Typically ammonia is converted to nitrate via nitrification • Requirements for Nitrification: • Typical Feed to Mass (F/M) Ratio = 0.15. This value increases with temperature

  25. Ammonia (NH3+) Aerobic Cycle(Air + Food) Ammonia Oxidising Bacteria(AOB) Nitrite Oxidising Bacteria (NOB) Nitrite(NO-) Nitrate(NO2-) Anoxic Cycle(Food) Nitrogen(N2) Nutrient Removal - Nitrate

  26. Various Process ConfigurationsBiological Nutrient Removal Johannesburg Process 5 stage Bardenpho process Modified University of Cape Town (MUCT)

  27. Tender Design

  28. Background • Leightons Middle East were bidding major Watewater Project in the Region • Mott MacDonald were commissioned to provide a detailed tender design covering all aspects of the project including: • Civil / Structural • Geo-technical • Process • Mechanical • Electrical and ICA

  29. Detailed Tender Design • Close collaboration between all partiesin the tendering team • Clearly defined extent of design responsibilities between all parties involved • Use of design examples / experience gained during execution of similar project elsewhere within Mott MacDonald • A detailed tender design was produced making use of the skills of all parts of the team • Good understanding of risks associated with the project and providing greater cost certainty to contractor and ultimate client • Detailed tender stage work would facilitate rapid start following award. • Key Design aspects include: • Carrying out engineering calculations for all structures and systems • Preparation of 3D Modelling of key structures

  30. www.mottmac.com

More Related