1 / 22

Organic-Inorganic Hybrid Preparation

Organic-Inorganic Hybrid Preparation. Advisor: Professor Guey-Sheng Liou Reporter: Chin-Yen Chou( 周勁言 ) 2014.01.03. Outline. Introduction Preparation of organic-inorganic hybrid Sol-gel method Assembly of nanobuilding blocks Applications Conclusions. Introduction.

yvon
Download Presentation

Organic-Inorganic Hybrid Preparation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Organic-Inorganic Hybrid Preparation Advisor: Professor Guey-ShengLiou Reporter: Chin-Yen Chou(周勁言) 2014.01.03

  2. Outline • Introduction • Preparation of organic-inorganic hybrid • Sol-gel method • Assembly of nanobuilding blocks • Applications • Conclusions

  3. Introduction The definition of Inorganic-organichybrid material inorganic + organic components (homogeneously) distributed on the molecular or nanometer level Sum of the individual properties of both phases Organic-Inorganic hybrid materials Weak bonds e.g. H-bond, Van der Waals bond Interface properties Strong chemical bonds e.g. Covalent bond

  4. Introduction Table 1 Comparison of properties of conventional organic and inorganic components C. Sanchez ,et al, J. Mater. Chem., 2005, 15, 3559–3592

  5. Introduction Homogeneous Heterogeneous Problems: the change of light scattering, mechanical properties, physical properties etc. Control over homogeneity: Precursor selection (functional group) Reaction condition: solvent, pH value, temp. Interactions between the components

  6. Fig.1 Different paths for obtaining hybrid materials. C. Sanchez ,et al, Chem. Mater. 2001, 13, 3061-3083

  7. Outline • Introduction • Preparation of organic-inorganic hybrid • Sol-gel method • Assembly of nanobuilding blocks • Applications • Conclusions

  8. Sol-gel method The principle of sol-gel method • Effect factor: • pH value • The amount of water • The type of metal alkoxide • Solvent type

  9. Sol-gel method Inorganic-Organic Hybrid Polymers The optional variations in experimental: Different elements of metal alkoxides Different of organic monomers, macromolecules or a reactive substituent The reaction type: thermal or photochemical polymerization Fig.2 Sketch of the Different Possibilities of preparing organic-inorganic hybrid polymers. Ulrich Schubert, et al, Chem. Mater. 1995, 7, 2010-2027

  10. Table 2 Examples of network formers and network modifiers C. Sanchez ,et al, J. Mater. Chem., 2005, 15, 3559–3592

  11. Sol-gel method Example: Gel-glass-dispersed liquid crystals (GDLCs) PBCN liquid crystal. R- triethoxisilane (R= methyl, ethyl, propyl, butyl...) Tetraethyl orthosilicate (TEOS) David Levy, et al, J. Mater. Chem., 2005, 15, 3769–3775

  12. (thickness 10 μm, 4 × 2 cm2, Vp–p=90 V) David Levy, et al, J. Mater. Chem., 2005, 15, 3769–3775

  13. Sol-gel method Example: Sol-gel process Hydrolysis/ condensation Thickness: 15±3μm Guey-Sheng Liou, et al, J. Mater. Chem., 2012, 22, 17236–17244

  14. Assembly of nanobuilding blocks Nanobuilding block Organic Connectors Organic-Inorganic interaction Hybrid formation C. Sanchez ,et al, Chem. Mater. 2001, 13, 3061-3083

  15. Assembly of nanobuilding blocks Fig.3 The schematic of nanobuilding blocks polyhedral oligomericsilsesquioxane (POSS) K. Pielichowsk,et al, Adv PolymSci (2006) 201: 225–296

  16. Assembly of nanobuilding blocks Graft or polymerization Joseph J. Schwab,et al, Appl. Organometal. Chem. 12, 707–713 (1998)

  17. Assembly of nanobuilding blocks Example: Table.3 The data of thermal properties of epoxy-POSS hybrid material Table.4 The data of mechanical properties of epoxy-POSS hybrid material Xiaoyan Ma,et al, J. APPL. POLYM. SCI. 130, 2, 810-819 (2013)

  18. Outline • Introduction • Preparation of organic-inorganic hybrid • Sol-gel method • Assembly of nanobuilding blocks • Applications • Conclusions

  19. Applications C. Sanchez ,et al, J. Mater. Chem., 2005, 15, 3559–3592

  20. Outline • Introduction • Preparation of organic-inorganic hybrid • Sol-gel method • Assembly of nanobuilding blocks • Applications • Conclusions

  21. Conclusions Sol-gel method: • Simple reaction • Low cost (processing temperatures, solvent…) • Flexible design (metal alkoxide, reaction condition….) Assembly of nanobuilding blocks: • Much more homogenous distribution of both moieties which facilitates the characterization of the final materials • Flexible design (building block) M.F. Ashby, et al, Acta Materialia 51 (2003) 5801–5821

  22. Thanks for your attention!

More Related