1 / 17

Heating and Efficiency

Heating and Efficiency. AP Env Sci - Home Heating Activity. Heat Needed for a Home or Other “Space”. Heat expressed in Btu - British Thermal Units - heat 1 lb water 1 degree F. H=heat needed in Btu H= K is thermal conductance What are factors that determine K. H = K T t

zamora
Download Presentation

Heating and Efficiency

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Heating and Efficiency AP Env Sci - Home Heating Activity

  2. Heat Needed for a Home or Other “Space” • Heat expressed in Btu - British Thermal Units - heat 1 lb water 1 degree F. • H=heat needed in Btu • H= K is thermal conductance • What are factors that determine K. • H = K T t • T = temp. diff. Between inside and average outside • t - time increment

  3. What factors determine K • K is thermal Conductance • On total size of home in square footage • Construction material • number of windows and efficiency of windows • insulation in walls and ceiling • Other conservation measures

  4. What is a Degree Day (DD)? • 650 F is considered the standard temperature • t is measured in days • T - is difference between average temperature outside and 650F. • Example: average temp outside is 500F for one week, How many heating degree days that week? • DD= Tt = (65-50) 0F X 7 days = 105 degree-days

  5. Calculation of Thermal Conductance • To compare houses of different sizes, must eliminate the factor of square footage from K • k = K/A, where A is the area to be heated in square feet • SO, k is the thermal conductance per sq foot • So, H= k x A x DD • So, what factors determine H, the amount of heat needed to reach an average of 650F? • Size, the outside temperature, and the efficiency of the home (k) • If k = 10 BTU/sq foot - DD, what does this mean?

  6. Calculation Example • What is the heating requirement in BTU for a home of 1300 sq ft, 6000 DD for entire heating season, with a k value of 10 Btu/sq ft-DD?

  7. Calculation Example • What is the heating requirement in BTU for a home of 1300 sq ft, 6000 DD for entire heating season, with a k value of 10 Btu/sq ft-DD? • 10 Btu/sq ft-DD X 1300 sq ft X 6000 DD = 7.8 X 107 Btu

  8. Fuel Requirements • Two factors • Type of Fuel • Efficiency of furnace or other heating device • Hdelivered = the amount in heat in Btu delivered to the space in the home • Hpurchased = amount of energy content in the fuel • ε = efficiency of the heating unit • Therefore, Hpurchased = Hdelivered/ ε

  9. Calculations of heat needed • Say gas furnace is 70% efficient • to deliver the 7.8 X 107 Btu, how much BTU in oil would you need to “purchase” (that is, actually put into your furnace)?

  10. Calculations of heat needed • Say gas furnace is 70% efficient • to deliver the 7.8 X 107 Btu, how much BTU in oil would you need to “purchase” (that is, actually put into your furnace)? • 7.8 X 107 Btu / .70 = 1.14 X 108 Btu

  11. How much actual fuel needed? • Calculate the amount of natural gas required • For natural gas: 1030 Btu/ft3 • Note:gas companies typically use mcf (1000 ft3) or ccf (100ft3) • At cost of gas at _______ how much is the cost to heat this home? • (1.14 X 108 Btu) X (1 ft3/1030 Btu) = 1.11 X 105 ft3 • ( 1.11 X 105 ft3 ) X $1.25 / 100 ft3 = $ 1387.50

  12. How can cost be reduced? • Higher efficiency furnace • Redo calculation with 90% efficiency furnace • 7.8 X 107 Btu / .90 = 8.7 X 107 Btu • 8.7 X 107 Btu X (1 ft3/1030 Btu)= 8.4 X 104 ft3

  13. How can cost be reduced? • Higher efficiency furnace • Redo calculation with 90% efficiency furnace • (1.14 X 108 Btu) / .90 = 1.27 X 108 Btu • ( 1.3 X 105 ft3 ) X $1.25 / 100 ft3 = $ 1050

  14. Important question - What determines k? • (k represents the efficiency of the home) • Factors that could improve k are: • Improve thermal efficiency (k) of building - HOW? • Say efficiency is improved by 20%, what would you save?

  15. Payback periods - Improve Furnace • N (years) = cost of improvement X years/saving each year • =cost of improvement/savings per year • Calculate the payback period for improving the efficiency of your furnace in the above example, assuming a more efficient furnace would cost $2000.

  16. Payback periods - Improve k - efficiency of home • Assume previous problem 20% improvement in k? • What would you do to accomplish this, and at what cost? (assume original 70% efficient furnace) • Say 10 new windows, at cost of $250 per window. • Say, improve insulation - total cost of $600, you do labor.

  17. Improved Efficiency by 20% • (.2) (10 Btu/sq ft-DD) = 8 Btu/sq ft-DD • 8 Btu/sq ft-DD X 1300 sq ft X 6000 DD = 6.24 X 107 Btu • 6.2 X 107 Btu / .70 = 1.14 X 108 Btu

More Related