1 / 10

Seal Flushing

Seal Flushing. Introduction. Why Seal Flushing Is required? It is normal that a seal is exposed and expected to operate in hostile environments like corrosive, dirty, fluids with abrasive content etc.,.

zarek
Download Presentation

Seal Flushing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Seal Flushing

  2. Introduction • Why Seal Flushing Is required? • It is normal that a seal is exposed and expected to operate in hostile environments like corrosive, dirty, fluids with abrasive content etc.,. • To combat with such attacks, a new friendly environment is created around the seal, thereby isolating it from unwanted environment. • Secondly, heat generated due to friction between the sealing faces shall be removed from the source continuously.

  3. Why Seal Flushing Is required ?(contd) In short, flushing is provided in a seal for • To control dirt. • To heat or Cool the seal area ( wherever applicable). • To create a friendly atmosphere for the area where seal is operating. • In some conditions, to keep away the product itself from the SEAL entirely!

  4. The Secret to achieve satisfactory seal performance lies in creating a proper environment for the seal to operate. • THE CREATING SUCH AN ENVIRONMENT- WHOLLY OR PARTIALLY IS POSSIBLE BY PROVIDING FLUSHING

  5. FLUSHING • Flushing can be defined as the introduction of a liquid into the stuffing box at a higher pressure than stuffing box pressure to eliminate the friction in between mating ring and cool the part’s .

  6. FLUSHING • The most common methods of flushing are: • BYBASS FLUSING. • EXTERNAL FLUSHING.

  7. BYPASS FLUSHING

  8. BYPASS FLUSHING -II

  9. EXTERNAL FLUSHING

  10. FLUSHING- OUTSIDE SEAL

More Related