1 / 27

The ABCs of Construction Site Safety

The ABCs of Construction Site Safety. Craig Hamelund OR-OSHA (503) 229-5910. A. Accident Prevention Accident Investigation. frequent inspections ‘qualified’ operators investigate “lost time” injuries – including soft tissue injuries!. B. Barricades & Other Traffic Control.

Ava
Download Presentation

The ABCs of Construction Site Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The ABCs of Construction Site Safety Craig Hamelund OR-OSHA (503) 229-5910

  2. A Accident Prevention Accident Investigation frequent inspections ‘qualified’ operators investigate “lost time” injuries – including soft tissue injuries!

  3. B Barricades & Other Traffic Control when on or adjacent to highway, street, roadway per MUTCD or ODOT’s handbook high visibility garments

  4. C Chemicals (HAZCOM) MSDSs labels training written program

  5. D Division 3 Construction Rules OR-OSHA’s safety & health rules for construction activities don’t forget Program Directives and Interps

  6. E Electrical GFCI assured grounding prg. working near overhead high voltage lines

  7. F Fall Protection general fall protection six & 10 foot rules also required in other OR- OSHA standards falling object protection

  8. G Guarding grinders, saws, etc. point of operation,, pinch points, rotating parts, etc. flying debris

  9. H Health Hazards Div 3/Sub C, D & Z silica, CO, lead, etc. confined spaces heat stress plants & insects

  10. I Inspections many other specific standards require frequent & regular safety committee documented?

  11. J Job Hazard Analysis an effective pre-task plan employee involved establishes safe job procedure enhances training

  12. K Keeping The Site Clean housekeeping sanitation material handling right of way

  13. L Ladders proper selection inspections set-up & safe use training

  14. M Medical & First Aid provisions for prompt medical attention accessible first aid supplies (checked weekly) exposure control

  15. N Noise action plan (85dBA TWA) periodic monitoring & audiograms engineering controls hearing protectors

  16. O Organizing A Safety Committee bring workers and mgt. together in cooperative effort to promote safety OR-OSHA requirements currently being revised

  17. P PPE evaluate work site eye/face protection head, hand, foot, & respiratory prot. high visibility

  18. Q Qualified/Competent Person definitions requirements in several specific standards

  19. R Rigging & Cranes frequent inspections operator training & card written procedures suspended platforms

  20. S Scaffolding foundation & platforms fall protection safe access aerial lifts training

  21. T Trench/Excavation utilities safe access/egress exposure to mobile equipment/accessories shoring

  22. U Unsafe Condition hazard + exposure corrective measures

  23. V Backing Zone (Distances in ft) Vehicles & Mobile Equipment new vehicle rules pinch points right of way high visibility garments

  24. W Welding & Cutting fire prevention chemical exposure burns/flash noise PPE

  25. X X-Ray & Other Radiation lasers ionizing & nonionizing

  26. Y Your Attitude can it affect others? “work smarter, not harder” – ergonomic awareness

  27. Z “Zero Energy State” lockout/tagout when servicing equipment & machinery procedure, training, and periodic inspections

More Related