1 / 3

Dana 60 disc brake conversion kit

Front disc brakes can every so often have a hassle that sneaks up on you. When a vehicle pulls to one facet when braking, it’s no longer continually substantial at first, however can subsequently get worse, creating an hazardous using condition which may want to lead to loss of driver control. It might also not be evident at gradual speeds; however a panic - end or hard braking in a nook can surprise a driver if the automobile pulls to one aspect when braking. This braking circumstance needs to be corrected immediately.

Lugnut
Download Presentation

Dana 60 disc brake conversion kit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dana 60 disc brake conversion kit Front disc brakes can every so often have a hassle that sneaks up on you. When a vehicle pulls to one facet when braking, it’s no longer continually substantial at first, however can subsequently get worse, creating an hazardous using condition which may want to lead to loss of driver control. It might also not be evident at gradual speeds; however a panic - end or hard braking in a nook can surprise a driver if the automobile pulls to one aspect when braking. This braking circumstance needs to be corrected immediately. Front brake calipers are designed to 'float' or slide on their mounting surfaces. You must have the Dana 60 disc brake conversion kit. Dirt, street grime, brake pad dust, and floor rust can build up between these surfaces inhibiting the calipers to slide properly. One caliper can be slower to take hold of than the other, which is why the car pulls to one facet when braking. Most would anticipate that oil or grease may additionally have contaminated the brake pads; but this is now not always the case.

  2. There is an effortless fix if your car pulls to one side when braking. Raise the automobile and remove wheel. Unbolt brake caliper and carry off of mounting bracket. Don't let it hang via the brake hose, put a jack stand or block of wood beneath it for support. Inspect the mating surfaces of both the brake caliper and mounting bracket. Using emery material or sandpaper, sand these surfaces to eliminate any build-up of rust, brake pad cloth or street dirt. Wipe areas smooth with a save rag, repeating the process till all mounting surfaces are smooth and smooth. Put a dab of high-temperature disc brake bearing grease on all the mating surfaces; be careful to avoid getting any on brake rotor or pads. Using your finger spread the grease on the easy surfaces to allow the grease to get in the pores of the metal. Wipe off any excess. Reinstall brake caliper, use brake cleaner to spray off any grease that may additionally have touched brake pads or brake rotor. Repeat procedure for other aspect with Dana 60 disc brake conversion kit.

  3. Test drive vehicle on a straight road at gradual speeds, follow brakes, and feel for any pulling sensation. Test at distinctive speeds. Pat yourself on the back for a job well-done, and the money you saved by means of doing it yourself. For more information: Mail id- gubni2@gmail.com, Contact Number- +1 423-737-0265, http://lugnut4x4.com.

More Related