Cabling and bracing helps a lot to maintain tree health

1. Cabling and bracing helps a lot to maintain tree health As newly planted trees require a lot of care in the same way mature trees sometime demand little bit extra care. If we don’t pay attention at the right time then the trees start deforming and the condition will go from bad to worse and might get out of control and we may lose the tree forever.

2. This is because when the plants start growing its branches and limbs of the trees get heavy; the trunk will no longer be able to bear the weight of those branches and will demand some external support It will create problems in future if we ignore the problems of weight gain in trees. So it is better to do cabling and bracing at the right time with the help of professionals like Burlington arborist and maintain the structural bond of the tree.

3. Cabling • Cabling is a technique in which we can reduce the excessive motion of branches. This technique basically provides support via the steel rods which are installed inside the branches of the trees.

4. Steel rods actually redistribute the weight of the heavy limbs which will support the tree trunks. Cabling can be done in two ways: • Static cabling: Steel cables are used in static cabling in order to give a secure support system to the tree. In this two J-Jag cabling hooks and clamps are installed inside the tree limb. The movement of the trees is comparatively less than dynamic cabling.

5. Dynamic cabling: As the name suggests in this synthetic cables are used to sling between the limbs of the tree in order to provide a flexible support system. In order to minimize the strain on the tree or to provide movement and growth to the tree a slack is left in the cable.

6. Bracing • Bracing is the technique which provides a solid support to the trees it totally reduce the movement between limbs so that the tree will not split or crack further.

7. Difference between Cabling and Bracing a tree • Cabling is done to protect the upper canopy of the tree whereas bracing is done to protect the lower region of the trees. • Cabling is done by installing a steel rod between the major branches of the trees while in bracing a steel rod is placed below and above the damaged portion. • Bracing is a rigid application while cabling allows the movement of tree branches for some extent. • Both are useful to protect the trees during bad weather condition.

8. Completely a technical task so better take help from a professional • Cabling and bracing are the two important tasks which provide a structural support to the trees. For the support system one can use flexible cable or steel rod depending upon the need of the tree. All this work needs planning and calculation like at which angle and which point the tree demands the support. So if you think it is an easy task and you will do it by yourself then you might be wrong unless you have professional expertise and knowledge. This is a technical task and not as simple as you think or feel and needs assistance of a professional like arborist Mississauga who have vast knowledge of trees. They can guide you in a better way and protect your trees.