1 / 2

LOM coupler HFSS modeling.

LOM coupler HFSS modeling. Green line in the plot corresponds to initial I-DEAS design. One of the resonances has too low frequency, another resonance is too narrow. Notch frequency 3200 MHz is too low, should be 3900 MHz.

abeni
Download Presentation

LOM coupler HFSS modeling.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LOM coupler HFSS modeling. Green line in the plot corresponds to initial I-DEAS design. One of the resonances has too low frequency, another resonance is too narrow. Notch frequency 3200 MHz is too low, should be 3900 MHz. Green line – after optimizing of the coupler, one broad resonance with maximum at 2830 MHz. Notch frequency is 3900 MHz.

  2. F=2702.3 Q=697 HFSS model was build from I-DEAS surface mesh file. This mesh file from Don. He extract it from optimized model. Both resonances close to design frequency of 2830 MHz. Notch frequency is 4100 MHz. All resonances in final tuning range. F=2945

More Related