1 / 12

Proposed Roadmap Tables on

Proposed Roadmap Tables on. SOC Low Power. This is an updated version of SoC Low Power Roadmap from STRJ-WG1 developed in 1999. STRJ-WG1. June 2001. Technology Node, ASIC Usable Transistors, DRAM capacity, and Power Supply Voltage conform to ITRS2000 update SC2.0.

ailis
Download Presentation

Proposed Roadmap Tables on

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Proposed Roadmap Tables on SOC Low Power This is an updated version of SoC Low Power Roadmap from STRJ-WG1 developed in 1999 STRJ-WG1 June 2001

  2. Technology Node, ASIC Usable Transistors, DRAM capacity, and Power Supply Voltage conform to ITRS2000 update SC2.0. Application is not specified, but surely it is high-end SOC in each generation. Other premises or prospects are consistent with those of “SOC Design Productivity”, such as ; Die size remains around 10mm Logic gate count ratio continuously decreases. Operation frequency goes up from 150MHz(1999) to 2500MHz(2014) . Low　Power SOC Low Power Premises & Prospects

  3. Power consumption follows a basic well-known formula, that is Power ∝ C * V * V * f . “C” can be decomposed into “size factor” and “process factor”. Total transistor count and technology node represents “size factor” and “process factor”, respectively. “V*V” is considered as “voltage factor”, and it is just internal voltage. Also, “f” is considered as “frequency factor”, and it is just max frequency. “total power trend” is defined as relative amount of power consumption for each year(2001, 2004, 2011 and 2014) comparing each of above four “factor” for 1999 as unit(=1). Low　Power SOC Low Power (cont.) Assumptions

  4. “total power trend” is derived by the following calculation, “total power trend” = “size factor” x “process factor” x ”voltage factor” x “frequency factor” Current SOC power consumption is assumed around 3W. For “size factor”, constant coefficient 0.85 is applied to Memory portion, while 1.0 to Logic portion. Low　Power SOC Low Power (cont.) Assumptions(cont.)

  5. Low　Power SOC Low Power (cont.) How to derive “Total Power trend” and “Power estimation” Total Power trend = “size factor” x “process factor” x ”voltage factor” x “frequency factor” Power estimation (W) = (Total Power Trend) x 3W (Ex.) in 2004 Total Power trend = 7.71 x 0.50 x 0.36 x 6.67 = 9.25 Hence, Power estimation( W ) = 9.25 x 3 = 27.75 W

  6. Low　Power SOC Low Power (cont.)

  7. Low　Power SOC Low Power Table

  8. Low　Power SOC Low Power Design - Potential Solution Map -

  9. Trade-off line between operation frequency and size(Mtr) is put for each Technology node under the condition to accomplish 0.5W power consumption. A set of potential low power technology is overlaid in accordance with those contribution area and degree of range. Each potential technology is classified into three types( speed, size, and all ) with respect to main contribution. Low　Power SOC Low Power Design - Potential Solution Map - What this figure means ….

  10. Low　Power SOC Low Power Design Appendix The following two pages are Low Power table and solution map developed by STRJ-WG1 in 1999 based upon ITRS1999 data

  11. Low　Power STRJ-WG1 1999 Version SOC Low Power Table

  12. Low　Power STRJ-WG1 1999 Version - Potential Solution Map -

More Related