1 / 39

2. Transistors and Layout

This article covers the fabrication processes for transistors, including photoresist and mask patterns. It also discusses the structures and characteristics of transistors, as well as wire layout and design rules.

antwans
Download Presentation

2. Transistors and Layout

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2.Transistors and Layout • Fabrication techniques • Transistors and wires • Design rule for layout • Basic concepts and tools • for Layout

  2. 2.2 Fabrication Processes2.2.1 Overview Minimum channel length=0.5μm λ=0.25μm ---- 0.5μProcess

  3. 2.2.2 Fabrication Steps Photoresist: mask pattern SiO2 pattern • Features are patterned on the wafer by a photolithographic process; • The wafer is covered by light sensitive material “photoresist”. • It is exposed to light with proper mask pattern. • The patterns left by the photoresist can be used to control where SiO2 is grown on materials.

  4. Steps in processing a wafer(twin tub process) • Put tubs into wafer. • Form an oxide covering on wafer and the polysilicon wires. • Diffusion (wires) (polysilicon masks the formation of diffusion wires.=self-aligned) • Metal connections are made with filling cuts (via) to make connections after another oxide layer is deposited.

  5. 2.3 Transistors2.3.1 Structures of Transistors • “MOS” : sandwich of Metal, Oxide, and Silicon (semiconductor substrate). • The positive voltage on the polysilicon forms gate attracts the elctoron at the top of the channel. • The threshold voltage (Vt) collects enough electrons at the channel boundary to form an inversion layer (p -> n). Field Oxide Gate Oxide

  6. Layout of n-type and p-type transistors nMOS pMOS nMOS with wide width

  7. 2.3.2 A Simple Transistor Model Linear region Saturated region

  8. 2.3.3 Transistor Parasitics • Cg: gate capacitance = 0.9fF/μm2 (2 μprocess) • Cgs/Cgd: source/drain overlap capacitance =Cox W (Cox: gate/bulk overlap capacitance)

  9. 2.2.4 Tub Layout and Latchup • Tub Ties (substrate bias)

  10. Tubo Layout and Latchup

  11. 2.2.5 Advanced Transistor Characteristics Parallel plate oxide capacitance per unit area Cox = εox/xox where εox= permittivity of silicon dioxide = (3.9 εo) xox = oxide thickness

  12. Shape of the inversion layer as a function of gate voltage • Q(y)=Cox(Vgs-Vt-Vy) • dV=Iydy/μQ(y)W

  13. 2.4 Wires and Vias • Wires of different layers are insulated by an additional layer of SiO2. • Vias are cuts in the insulating SiO2.

  14. MTF for metal wires • The mean time for failure (MTF) MTF=j-ne(Q/kT). j:current density n:constant(1~2) Q:diffusion activation energy. • jMetal < 1.5mA/μm width (4.5mA by 3μm width wire)

  15. 2.4.1 Wire Parasitics Cj0 = εSi/xd Depletion region capacitance Cj0 : zero-bias depletion capacitance εSi : permittivity of silicon xd : thickness of depletion region depending on applied voltage.

  16. metal 3 0.1fF/cm2 0.3fF/cm2 (overlapping area) Depending on distance

  17. Example of Parasitic capacitance measurement 0.5 μm process (λ=0.25 μm) 1) Unit bottomwall capacitance C1_0=0.6fF/μm2 Area=3 μm x 0.75 μm+1.0 μm x 1.0 μm=3.25 μm2 (3.25 λ2μm2) C1=0.6fF(/ λ2) x 3.25 (xλ2)=1.95 fF 2)Unit sidewall capacitance C2_0=0.2fF/μm Perimeter=0.75+4+1+1+0.25+3=10 μm C2=0.2fFx10=2fF 3) Metal capacitance C3_0=0.04fF/ μm2 Area=2.5 μm x 1.5 μm=3.75μm2 C3=0.04fFx3.75=0.15fF 4) Metal fringe capacitance C4_0=0.09fF /μm Perimeter=(2.5+1.5)x2=8 μm C4=0.09fFx8=0.72fF 5) Total capacitance=1.95+2+0.15+0.72=4.85fF

  18. Example of Resistance Measurement • Ohms per square [Ω/ ] = Sheet resistance • 0.5 μm process (λ=0.25 μm) • Polysilicon resistance • Rpoly=[18/3]x4[Ω/ ]=24 Ω • n-diffusion resistance • [(9/3)+(6/3)+1/2]x • 2 [Ω/ ]=11 Ω

  19. 2.5 Design Rule2.5.1 Fabrication Errors • Problems when wire are too wide or narrow. • Polysilicon should extend beyond boundary of difusion area. • The cut of via must connect elements and not mistakenly connect to substrate or others.

  20. 2.5.2 Scalable Design Rules All physical parameters to be shrunk by a factor 1/x • Lengths: W–› W/x • Widths: L –› L/x • Vertical dimensions such as oxide thickness: tox–› tox/x • Doping concentrations: Nd –› Nd/x • Supply voltages: VDD-VSS –› (VDD-VSS) Id’/Id =1/x Cg’/Cg =1/x (C’V’/I’)/(CV/I) = 1/x

  21. 2.5.2 SCMOS Design Rules • Metal1 min-width=3λ, min-sep= 3λ • Metal2 min-width=3λ, min-sep= 3λ • poly min-width=2λ, min-sep= 2λ • n, p-dif min-width=3λ, min-sep(n-n, p-p)= 3λ (n-p 10λ) • Tube min-width=10λ, min-distance(tub- active)= 5λ • Transistors min-W/L=3λ/2λ poly extension= 2λ dif extension= 2λ active-poly/metal via=λ min-sep(tran.-tran.)= 2λ min-sep(tran-tub.tie) = 3λ

  22. SCMOS Design Rules (continue) • Vias cuts=2λx2λ via =4λx4λ n,p.diff-poly, poly-metal1 n,p.diff-metal1, metal1-metal2 • Tub ties cuts =2λx2λ metal =4λx4λ • Metal1 min-width=6λ, min-sep= 4λ available via to metal2 • Special rules cut to poly – poly sep =3λ poly.cut-dif.cut sep=2λ cut-tran.active sep =2λ dif.cut-dif sep = 4λ meta2.via must not be directly over polysilicon • Prohibit small negative features.

  23. 2.5.4 Typical Process Parameters

  24. 2.6 Layout Design and Tools2.6.1 Layouts for Circuits • Net: a set of electrical connections • Wire: a set of point-point connections. • Wire segment: a straight section of wire. • Circuit schematic: n-type, p-type transistors with W/L

  25. Design of an inverter layout

  26. 2.6.2 Stick Diagram

  27. Rules for possible interaction between layers

  28. 2.6.3 Hierarchical Stick Diagrams

  29. Example of stick design of a multiplexer

  30. Example of stick design of a multiplexer (continue)

  31. 2.6.4 Layout Design and Analysis Tools • Layout Editors: intensive graphic program for manual layout symbolic layouts: more detail than stick diagram • Design Rule Checkers (DRC): check items: minimum spacing minimum size combination of layers • Circuit Extractions: extension of DRC (identify transistors and vias) a complete job of compnents and wire extraction to produce a net list from layout.

  32. Circuit Extraction Basic Operation of Circuit Extraction NOT, AND, OR between 2 masks grow and shrink operation over masks. 1) extraction of transistors AND(poly - p/n.diff) 2) identify via grow cut AND(grown-cut, metal, poly)

  33. Hierarchical Circuit Extraction • Flattening is required to make extracted netlist small by making correspondence between net names in cells and nets int the top-level components.

  34. 2.6.5 Automatic Layout Cell generator (or macrocell generator) parameterized layout

  35. Standard Cell Placement and Routing Logic gates, latches, flip-flops, or larger logic Routing channels

  36. An Example of Standard Cell Layout • 2 stages placement routing

More Related