1 / 15

Installation & Wiring Guide for Flush Mount Door Lock FMD10

This guide provides detailed information on the installation and wiring process for the Flush Mount Door Lock FMD10. It includes cable descriptions, power and signal interfaces, bell and FP sensor interfaces, and connecting instructions for various types of door locks.

apartridge
Download Presentation

Installation & Wiring Guide for Flush Mount Door Lock FMD10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Installation & Wiring Guide Flush MountDoor Lock FMD10 V1.0 Doc. Ver. : V1.10 Feb.,25.2015 R&D Center Union Community Co., Ltd.

  2. 1. Cable Descriptions 2mm Pitch 6pin Power Interface Cable 6. BK : Ground 5. WH : Lock Normal Open 4. BR : Lock Normal Close 3. GY : Lock Com 2. BK : Power Input Ground 1. RE : Power Input DC12V Power Adapter Interface 1.5mm Pitch 9pin Signal Interface Cable 9. BK : Ground 8. YE : Wiegand Out1 7. OR : Wiegand Out0 6. BL : RS485 B 5. GR : RS485 A 4. BK : Ground 3. GR : Door Monitor 1 2. YE : Door Monitor 0 1. OR : Inside Open 2mm Pitch 2pin Bell Interface Cable 2. BK : Bell Switch B 1. GY : Bell Switch A

  3. 2. Main Board Feature J152 Smart Card Board interface Status LED BUZZER Top Side Bottom Side J151 FP Sensor Interface

  4. 3. Smart Card Board Feature J301 Main Board interface F301 Fuse JP301 Lock Power Control Jumper J304 Bell J302 Power Interface Cable J302 Power Interface Cable 1 [RE ]: Power Input DC12V 2 [BK ]: Power Input Ground 3 [GY ]: Lock Common 4 [BR ]: Lock Normal Close 5 [WH ] : Lock Normal Open 6 [BK ]: Lock Ground Top Side Bottom Side J303 Signal Interface Cable 1 [OR ]: Inside Open 2 [YE ]: Door Monitor 0 3 [GR ]: Door Monitor 1 4 [BK ]:Input Signal Ground 5 [GR ] :RS485 A 6 [BL ]: RS485 B 7 [OR ]: Wiegand Out 0 8 [YE ]: Wiegand Out 1 9 [BK ]: Signal Ground J604 FP Sensor J304 Bell Interface Cable 1 [GY ]: Bell Switch out A 2 [BK ]: Bell Switch out B J352 Touch Sensor J303 Signal Interface Cable J354 Smart Card Antenna

  5. 4. Smart Card Antenna Board Feature Bottom Side J401 Smart Card Antenna interface Cable

  6. 5. Schematic for Door Lock Interface

  7. 6. Connecting Dead-Bolt Type Door Lock (Fail Safe) Lock(-) Red Lock(+) Black Gray Green Door Monitor Inside Door Open S/W GND Inside Open

  8. 7. Connecting Strike Type Door Lock (Fail Safe) Lock(-) Lock(+) Door Monitor Inside Door Open S/W GND Inside Open

  9. 8. Connecting Strike Type Door Lock (Fail Secure) Lock(-) Lock(+) Door Monitor Inside Door Open S/W GND Inside Open

  10. 9. Connecting EM Type Door Lock (Fail Safe) (-)Black Lock(-) (+)Red Lock(+) Door Monitor Inside Door Open S/W GND Inside Open

  11. 10. Connecting Auto-Door (Contact Control) JP301 Remove Shunt Auto Door Operating Part Auto Door Motor Auto-Door Sensor Auto-Door Monitor Sensor Input Line 9P CONN Inside Door Open S/W

  12. 11. Connecting Wiegand Output to External Controller Data 0 Data 1 GND FMD-10 Supported Formats -26 bits -34 bits (Site Code + User ID) = User Card number for controller External Access Controller Input

  13. 12. Appendix 12.1 RS-485 Interface Ground RS-485 B RS-485 A

  14. 13. Wiring Guide 13.1 Terminal & Exit Button Adapter AWG20 * 2C AWG22 * 2C AWG20 * 4C Door

  15. 13. Wiring Guide 13.2 Terminal & Exit Button w/Lock Controller Lock Controller ( ex.BLC-015 ) Adapter AWG20 * 4C AWG22 * 2C AWG20 * 2C (Power) AWG20 * 2C (Battery) AWG22 * 2C(RS485) Door

More Related