1 / 22

Remote connection options for the Ten Tec Orion II

Remote connection options for the Ten Tec Orion II. Background:

Download Presentation

Remote connection options for the Ten Tec Orion II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Remote connection options for the Ten Tec Orion II Background: I have been in search of a method for some time to reliably control my transceiver remotely when desiring to listen and transmit on a remote radio from a quieter location. After some research, and comments received on the TT reflector, I decided to put together this brief tutorial on how I set up my station at the most basic level. The following slides are just one method of remotely controlling a radio. Many other options are available**. In the end this only cost me ~$110 to complete as I already had most of what I needed around the shack. Comments and questions are welcome. Most of all, have fun! Brad Denison, W1NT w1nt@arrl.net **In no way am I affiliated with any of the companies mentioned and this article.

  2. Table of Contents • Step one: Remote login to your station PC • Step two: My computers aren’t talking • Step three: Can anyone hear me? • Step four: Control your radio with your PC • Step five: My radio is turned off and on how? • Step six: For the CW operator

  3. Step one: Remote login to your station PC To remote login to your station PC your will either need the Windows application known as remote desktop or some other suitable virtual network connection (remote control) software package. One of these virtual connections is known as LogMeIn. This is free software and the home page for LogMeIn is shown to the right. After a few basic setup steps you will be able to see your home PC on a remote PC and control enough functions to power your rig up and control it. www.logmein.com

  4. Step one: Remote login to your station PC con’t…. If you decide to try LogMeIn, simply follow the steps shown here to get started for free. The free version is enough to get on the air from anywhere in the world. www.logmein.com

  5. Step one: Remote login to your station PC con’t…. Another virtual desktop connection software package that works well is known as RealVNC. This package requires installation on both the server (host) computer and the client (remote) computer. After performing the basic setup steps you can connect very similar to LogMeIn. www.realvnc.com

  6. Step one: Remote login to my station PC con’t…. Again, this program is also available free. I would recommend experimenting with this version first and then, if you choose, transition to the full featured editions. For all my operation on both LogMeIn and Real VNC I have never needed anything above the free versions. www.realvnc.com

  7. Step two: My computers aren’t talking Common server / client remote control issues: Port Forwarding If the Server Connection fails, the most likely cause of this problem is a router, that does not forward the connection request to the computer with your VNC software running. To solve this problem you will need to set up port forwarding on your router.What is port forwarding?A router can make a single internet connection available to many computers. But when a computer on the internet tries to establish a connection to your computer through the router, the router will need to know which computer handles the request (even if only one computer uses the router).Port forwarding instructs the router to forward a request to connect to your VNC server on the appropriate computer.How do I set up port forwarding?To do this you will need three relevant pieces of information: Your external IP, your internal IP, and the port(s) your remote software requires. The external IP is the IP address that your computer has on the internet. The client computer will need to contact this IP to connect to your router and in turn your server (or host) to which your radio is connected . The internal IP is the IP address that your computer has on the router's local network. Each service on the internet (web, mail, ftp) uses a specific port. VNC programs can use different ports by default. You will need to instruct you router that all traffic from the internet on this port should be forwarded to the internal IP of your VNC computer. The traffic protocol is always TCP, if you need to select this. How you set up port forwarding will depend on the brand of router. A sample router software setup looks like this:

  8. Step two: My computers aren’t talking con’t…. You will need to replace the values shown here (port 8080, IP 192.168.1.103) with the ones for your internal IP’s. Once this step is set up correctly your client and host should be able to communicate.

  9. Step two: My computers aren’t talking…. One other potential problem may be that you have a dynamic IP address – i.e. one that changes. If you use LogMein this is no issue, however, it could cause trouble over time on a program like RealVNC. To solve this get the free program called No-IP. With this software running you will have access to your PC via a free domain name that you set up. No matter what your ISP assigns as your dynamic IP it will always be assigned to this free domain name. This domain name is only active when the No-IP software is running on your host PC. www.no-ip.com

  10. Step two: My computers aren’t talking….I’m still confused There is a great website out there that can help you. It’s called portforward.com On this site you will find a wealth of information including a guide to the issues I am covering, especially the ports, the router issues, and the language behind all of this. www.portforward.com/guides.htm

  11. Step three: Can anyone hear me? If you plan on talking you need to get your voice from your client (remote) machine to your server (host) machine and then to your radio. Again there are multiple ways to do this, however, I chose Skype. Skype is a free method for calling one computer from another and it works well. www.skype.com

  12. Step three: Can anyone hear me? Con’t… You will want to install Skype on your remote and host machines and add each of these machines to each other machine’s contact list. Ultimately you will see the remote machine name that you assign in the contacts list to the right. Spend time calling the host machine and testing the behavior of Skype prior to connecting up your radio. This will help you understand how Skype behaves and what the critical audio settings are. www.skype.com

  13. Step three: Can anyone hear me? Con’t… Make sure you visit this menu for setting up your audio. You will have to play with this menu and your rig settings to make everything sound good so you might as well get familiar with it now. www.skype.com

  14. Step three: Can anyone hear me? Con’t… Take caution with the Skype sound settings that are associated with events. Ask yourself whether or not you want any of these sounds being transmitted while you are in the middle of a rare one. www.skype.com

  15. Step three: Can anyone hear me? Con’t… Finally, a neat feature is that you may auto accept calls. This will make the call connection as soon as the host computer is called. I find this very useful as it becomes one less thing I have to manage over the remote desktop connection. www.skype.com

  16. Step four: Control your radio with your PC Most folks do this for one thing or another already. In case not, there are many ways to interface your radio to your PC. One example shown here is the USB Interface II. This allows your rig to talk to your PC in a number of ways, depending on what your needs are. www.microham-usa.com

  17. Step four: Control your radio with your PC con’t… A few simple connections and you will be able to change rig functions from your PC, pass audio and CW among other things. www.microham-usa.com

  18. Step four: Control your radio with your PC con’t… Once your rig and PC are connected you will need to experiment with the rig control software package that best suits your needs. I chose N4PY’s program to control my TT OII. Using this computer control program I can control about all of the OII radio features from my desktop. Again, there are many programs available or you can write your own. So now we have it. You can control your rig, pass voice and connect to your PC-controlled radio from anywhere there is internet access. www.n4py.com

  19. Step five: My radio is turned off and on how? With some minor web research on this subject I did end up finding and using a web based power switch to turn off and on my OII and other shack gear remotely. This was so convenient I even use it to control other things remotely over and above my radio station. The device is called the web power switch II and it allows you to turn off and on outlets via a web page based control panel. www.digitalloggers.com

  20. Step five: My radio is turned off and on how? Con’t… The sample page on the right shows how easy it is to turn off and on your rig. Just click and you even get instant feedback on the current state of the power strip. I have cycled this strip many times and have yet to have an issue. www.digitalloggers.com

  21. Step six: For the CW operator If you prefer CW like I do then you may not need to pass voice all the time. So how do you send CW? Simple answer is use your com ports to your advantage and a CW keyboard type software. Two examples are shown on the right. Type and send – it’s that easy. k1el.com www.polar-electric.com/Morse/MRP40-EN/index.htm

  22. Summary: Setting up your radio for remote control is extremely cheap and easy – even free if you want it to be. All you need is an afternoon of your time and some patience to be up and running. Enjoy the bands. Brad, W1NT w1nt@arrl.net

More Related