1 / 51

Input/Ouput

Input/Ouput. Chap 22. 22.1 Streams. Stream means any source of input or any destination for output . A file pointer is used to access a stream. FILE *fp1, *fp2; Standard streams. Opening a File (22.2). Syntax: FILE *filePtr = fopen(fileName, mode);

astin
Download Presentation

Input/Ouput

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Input/Ouput Chap 22

  2. 22.1 Streams • Stream means any source of input or any destination for output. • A file pointer is used to access a stream. FILE *fp1, *fp2; • Standard streams

  3. Opening a File (22.2) • Syntax: FILE *filePtr = fopen(fileName, mode); • filePtr is a variable of a file pointer, a pointer to a FILE-structure object. • mode: read (讀檔), write (寫檔), append (追加);text (文字檔), binary 檔. (See next page) • Ex: FILE *fptr = fopen("mydata.txt", "r");

  4. Opening a File • mode in fopen(): • "r": • If the file does not exit, file opening fails; • Otherwise open it. • "w": • If the file exists, current content will be discarded; • If the directory in the file name does not exist,file opening fails; • Otherwise, create a new file for writing.

  5. Opening a File • Table of file open modes (開啟模式):

  6. Opening a File • ASCII mode (純文字模式): • fopen()預設是 ASCII 模式 • 讀入 DOS 換行符號 "\r\n" (\x0d0a)時，會自動改成 '\n' • 寫出 '\n'時也會改為 "\r\n" • '\0'會被視為字串結尾 • Binary mode: • 在 fopen()中以 "rb", "wb", etc. 開啟檔案 • 影片檔、圖片檔、甚至 MSWord檔都應該以 binary 格式存取。

  7. Opening a File • fopen() • On failure, fopen()returns NULL. • It is a good habit to check if the return value is NULL whenever you open a file. • Ex:FILE *fptr = fopen("mydata.txt", "r");if (fptr == NULL){ printf("開檔失敗\n"); exit(0);}

  8. Closing a File (22.2) • Syntax:fclose(FILE * filePtr); • Ex:FILE *fptr = fopen("mydata.txt", "r");// handling files here, then...fclose(fptr); • fclose()returns memory allocated for this file pointer • If you open too many files without closing it, your program will crash.

  9. Checking end-of-file (22.2) • Syntax:feof(FILE * filePtr); • Returns true if the end-of-file indicator of the stream for this file pointer is set.

  10. 22.5 Line I/O • fgets(char *str, int size, FILE *fptr) • Read in one line from a file. • If end-of-file is found, returns NULL. • Ex:FILE *fptr = fopen("mydata.txt", "r");char buf[1000];while (fgets(buf, sizeof(buf), fptr)!= NULL){// buf 是新讀入的一行文字 } • fputs(const char *str, FILE *fptr) • Write a line into a file.

  11. 22.3 Formatted I/O • fscanf(FILE *fptr, …scanf-params… ) • Same format and usage as scanf(), but its first parameter is a FILE pointer and the input comes from this file. • fprintf(FILE *fptr, …printf-params…) • Same format and usage as printf(), but its first parameter is a FILE pointer and the output is stored in this file.

  12. Formatted Input/Output Section 22.3

  13. printf() • printf(format string, other arguments); • Format specification: • %[flags] [width] [.precision] [{h | l | I64 | L}]type • Ex: printf( "%+3.5lf", 4.56);

  14. Printing Integers (整數) • 負數會印出負號來 一般 八進位制 unsigned 十六進制 長短整數

  15. Printing Floating-Point Numbers(浮點數) • %f – 印浮點數, 小數點前至少一位, 小數點後六位 • %e, %E – 科學記號表示法 Exponential notation (computer's version of scientific notation) • 150.3 的科學記號表示法是 1.503 x 10² • 電腦改以 1.503E+002 表示 (E 表 exponent) • 可規定大小寫 e or E • %g (or %G) – 選 %f or %e (%E), 後面不補零 (1.2300 只印出 1.23) • 選 %e: 指數小於 -4, 或大於等於precision (預設6位) • 選 %f: 其他情形

  16. Printing Strings and Characters • %c: 字元 character • %s: 字串 string • 請注意 • 字元以一對 single quotes 表示 ('z') • 字串以一對 double quotes 表示 ("z")

  17. Other Conversion Specifiers • %p • 印出位址格式 • %% • 印出百分比號 (%) 回 printf

  18. Field Widths 欄位寬度 • 設定欄寬所用 • 預設是靠右對齊 • 如果資料超過欄寬，仍會全部印出 Ex.for (i = 8; i < number; i++) printf("%3d %d\n", i, score[i]); 8 31 9 77 10 82 11 62 回 printf 寬度=3

  19. Precisions • Format • 設定在句點 (.) 之後 • 意義看各個 data type • 整數：最少印出幾個數字 • 數字太小的話，前面補零 • 浮點數： • %f, %e: 小數點後有幾位數字 • %g: significant digits最多位數 • 字串：最多印出幾個字元

  20. Examples printf("%.3d\n", score[i]); 301 023 2134 printf("%.3f\n", value[i]); 3.010 23.000 2.135 printf("%.6s\n", monthName[i]); Januar Fabrua March

  21. Examples printf("%.5e\n", score[i]); 3.40000e-003 3.40000e-005 3.45678e-005 printf("%.5g\n", score[i]); 0.0034 3.4e-005 3.4568e-005

  22. Field Widths and Precisions • Field width and precision可同時指定 • Ex. %5.3f • field width 或 precision 的值想用變數來指定時，用星號 asterisk (*) • Example:printf( "%*.*f", 7, 2, 98.736 ); %7.2f 回 printf

  23. Flags • 加在%後面 • 有些 flags 可以組合使用

  24. Examples printf("%8s%d\n", monthName[i], i+1); January1 Fabruary2 March3 printf("%-8s%d\n", monthName[i], i+1); January 1 Fabruary2 March 3 printf("%-8s%+d\n", monthName[i], i+1); January +1 Fabruary+2 March +3

  25. Examples printf("%d\n", number[i]); 85 -85 printf("% d\n", number[i]); 85 -85 printf("%06d\n", score[i]); 000085 000100

  26. Examples printf("%o, %#o\n", 1487, 1487); 2717, 02717 printf("%x, %#x\n", 1487, 1487); 5cf, 0x5cf printf("%X, %#X\n", 1487); 5CF, 0X5CF

  27. 特殊字元

  28. scanf() • scanf(format string, other arguments); • Format specification: • %[*] [width] [{h | l | I64 | L}]type • Ex: scanf( "%3d", &name);

  29. Formatting Input with scanf

  30. Formatting Input with scanf • Table continued from previous slide 回 scanf

  31. scanf() • 讀到不屬於指定型態所用的字元時就會停止 scanf("%x",&number); printf("您輸入了 %x,就是 %d\n", number, number); 234afternoon (←自己輸入) 您輸入了 234af,就是 144559 scanf("%d",&number); printf("您輸入了 %d\n", number); 234afternoon (←自己輸入) 您輸入了 234

  32. Field Width in scanf() • 最多只讀幾個字元，從中找出資料

  33. Examples scanf("%d", &number); printf("您輸入了%d\n", number); 123456 (←自己輸入) 您輸入了123456 • Field width in scanf() Ex. scanf("%2d%d", &a, &b); printf("您輸入了 %d 和 %d\n", a, b); 123456 (←自己輸入) 您輸入了 12 和 3456

  34. Example scanf("%c%s", &ch, str); printf("您輸入了 %c 和 %s\n", ch, str); String definition (←自己輸入) 您輸入了 S 和 tring

  35. Formatting Input with scanf • %[ ]: Scan sets • 只讀入在 scan set 裡的字元 • 讀到不在 scan set 中的字元時就停止 • %[^ ]: Inverted scan sets • 只讀入不在 scan set 裡的字元 • 讀到在 scan set 中的字元時就停止

  36. Examples scanf("%[abcde]",str); printf("您輸入的字串是 %s\n",str); baby (←自己輸入) 您輸入的字串是 bab scanf("%[abcde ]",str); printf("您輸入的字串是 %s\n",str); babe cat (←自己輸入) 您輸入的字串是 babe ca

  37. Examples scanf("%[^abcde]",str); printf("您輸入的字串是 %s\n",str); lover (←自己輸入) 您輸入的字串是 lov

  38. Formatting Input with scanf • Skipping characters • 所有其他出現在 format specification 中的字元都是在輸入時要被跳過的字元 • 或用 * 來跳過任何字元

  39. Example • scanf("%d/%d/%d", &y, &m, &d);printf("您輸入了%d年%d月%d日\n",y,m,d); • 必須以此格式輸入 • 99/2/15 • 否則找完第一個數後就因格式不合而結束動作 99/2/15 (←自己輸入) 您輸入了99年2月15日 99-2-15 (←自己輸入) 您輸入了99年-858993460月-858993460日

  40. Example • scanf("%d/%d/%d",&y,&m,&d); 可接受輸入格式 • 99/2/15 • scanf("%d%*c%d%*c%d",&y,&m,&d); 可接受輸入格式 • 99/2/15 • 99-2-15 • 99.2&15 __

  41. Examples scanf("%d%*c%d",&m,&d); printf("%d 月 %d 日\n",m,d); //跳過任意一個字元 12_5 (←自己輸入) 12 月 5 日 scanf("%d%*d%d",&m,&d); printf("%d 月 %d 日\n",m,d); //跳過任意一個整數 12 23423 5 (←自己輸入) 12 月 5 日

  42. Examples scanf("%d%*s%d",&m,&d); printf("%d 月 %d 日\n",m,d); //跳過任意一個字串 12and... 5! (←自己輸入) 12 月 5 日

  43. Practice • 輸入格式為 yyyymmdd • 如何讀出年月日？ • 輸入 "Peter is a student"或 "Mary is an operator" • 將第一個字串存入 name (名字)，第四個字串存入 occup (職業)

  44. 22.6 Block I/O • Reading or writing a block of data into a file at one time. • fread() • fwrite() • Especially useful for handling binary files

  45. Block I/O fread(const void *buffer, size_t size, size_t count, FILE *fptr) Reading data from a file into a buffer. count: number of data; size: size of each datum Ex: int a[30], k; FILE *fptr; ... // 讀一筆整數資料到一個整數變數 fread(&k, sizeof(int), 1, fptr); // 一次讀30 筆整數資料到一個整數陣列 fread(a, sizeof(int), 30, fptr);

  46. 範例 int k; FILE *fptr; ... fread(&k, sizeof(int), 1, fptr); // k 的值就會變成 (00 00 01 02)2=258 // 注意x86 機器儲存 bytes 的順序是 low byte 在前面，high byte 在後面 fptr 所開檔案 02 01 00 00 a1 00 00 00 00 00 8C 45 00 77 EF DD .......................

  47. Block I/O fwrite(const void *buffer, size_t size, size_t count, FILE *fptr) Write data into a file. count: number of data; size: size of each datum Ex:int a[30], k; FILE *fptr; ... // 將一個整數變數資料寫到檔案 fwrite(&k, sizeof(int), 1, fptr); // 一次將30 筆陣列中的整數資料寫到檔案 fwrite(a, sizeof(int), 30, fptr);

  48. 22.8 String I/O • sscanf(char *str, …scanf-params… ) • Same format and usage as scanf(), but its first parameter is a string and the input comes from this string. • sprintf(char *str, …printf-params…) • Same format and usage as printf(), but its first parameter is a character array and the output is stored in the array as a string.

  49. 22.4 Character I/O • fgetc(FILE *fptr) • Read in one chatacter from a file. • You should check end of file by yourself by usingfeof(). • fgetc(stdin) equals getchar() • fputc(int ch,FILE *fptr) • Write a character into a file. • fputc('a',stdout) equals putchar('a')

  50. 22.7 File Positioning • fseek(FILE *fptr, int offset, seek_const ) • 將檔案讀取位置移至指定位置 seek_const可設為 • SEEK_SET –移至檔頭算來 offset 的位置 • SEEK_CUR –移至目前位置再往後 offset 的位置 • SEEK_END –移至檔尾算來 offset 的位置 • offset 單位是 bytes，offset<0 表往回的相對位置 • rewind( FILE *fptr ) • 將檔案讀取位置歸零 • int ftell( FILE *fptr ) • 傳回目前檔案讀取位置

More Related