1 / 16

Feedforward Control

Course PEF3006 Process Control Fall 2018. Feedforward Control. By Finn Aakre Haugen (finn.haugen@hit.no). Why feedforward control? Faster disturbance compensation and/or Faster setpoint tracking (important only with time-varying setpoint ).

ata
Download Presentation

Feedforward Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Course PEF3006 Process ControlFall 2018 Feedforward Control By Finn Aakre Haugen (finn.haugen@hit.no) PEF3006 Process Control. USN. F. Haugen. 2018

  2. Why feedforward control? • Faster disturbance compensation • and/or • Faster setpoint tracking (important only with time-varying setpoint) PEF3006 Process Control. USN. F. Haugen. 2018

  3. Control system with bothfeedforward and feedback: PEF3006 Process Control. USN. F. Haugen. 2018

  4. Example 1: Feedforward in level control system Simulator Let's derive the feedforward controller (it is quite easy). Skala: LTLine brukerforum, 9.1.18: Minikurs i regtek. F. Haugen.

  5. Example 2:Feedforward control in a temperature control system • (Wewill run a simulator ofthisexample.) PEF3006 Process Control. USN. F. Haugen. 2018

  6. Example cont.: How to derive the feedforward controller: (1) Process modelling: Energy balance: (2) The feedforward controller is obtained bysolving for the control variable, andsubstituting the process variable by its setpoint: Can it be implemented? Find out by inspecting the right-hand side! All terms must have known values. Which sensors are needed? PEF3006 Process Control. USN. F. Haugen. 2018

  7. Example cont.: • Simulator: • Feedforward control in temperature control system PEF3006 Process Control. USN. F. Haugen. 2018

  8. Example 3:Feedforward in a DP system( dynamic positioning) 8 • Simulator: • Feedforward in DP system PEF3006 Process Control. USN. F. Haugen. 2018

  9. 9 Experimental feedforward PEF3006 Process Control. USN. F. Haugen. 2018

  10. 10 Structure of control system: PEF3006 Process Control. USN. F. Haugen. 2018

  11. 11 Relation between disturbance measurement and steady-state control signal (with PID controller): PEF3006 Process Control. USN. F. Haugen. 2018

  12. Example 1: Temperature control of air heater 12 PEF3006 Process Control. USN. F. Haugen. 2018

  13. Example 1 cont. 13 Potensio- meter Pot.metervoltage Air flow (fan speed) Temp at outlet PEF3006 Process Control. USN. F. Haugen. 2018

  14. Without feedforward (only feedback): 14 PEF3006 Process Control. USN. F. Haugen. 2018

  15. With feedforward (and feedback) 15 Improvement? PEF3006 Process Control. USN. F. Haugen. 2018

  16. Example 2: Feedforward from inlet temperatur (Tp_inn)in temp. control of heat ex. • Simulator PEF3006 Process Control. USN. F. Haugen. 2018

More Related