1 / 2

重要工作報告 – 9 月客訴 分析

重要工作報告 – 9 月客訴 分析. Date Customer Mode Dept. Complaint Fact Corrective Action Date Cate. 9/10 Foxconn FSB018-4RAG BU1. Foxconn FSB018-4RAG 與 FSA035-00BG 組裝不良 Issue -- Sep.

avram-caldwell
Download Presentation

重要工作報告 – 9 月客訴 分析

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 重要工作報告– 9月客訴分析

  2. Date Customer Mode Dept. Complaint Fact Corrective Action Date Cate. 9/10 Foxconn FSB018-4RAG BU1 Foxconn FSB018-4RAG與FSA035-00BG 組裝不良Issue -- Sep • Foxconn反饋出貨背板: FSB018-4RAG 與其电源模塊:FSA035-00BG 組裝困難,Foxconn PE確認為其電源模塊左右邊尺寸超過Spec（37.74MM,39.01MM),懷疑是電源模塊本身尺寸超Spec 引起背板和電源模塊組裝不良. • 經廠內确认組裝不良的根本原因:背板FSB018-4RAG 浮高會引起組裝困難,其原因是由於模塊FSA035-00BG 機殼下蓋卡鈎變形,導致在組裝時碰到背板的排PIN引起浮高. • 其電源模塊:FSA035-00BG機殼下蓋卡鈎變形也會導致組裝困難. • 背板FSB018-4RAG 排PIN浮高的單體,修改MOI新增一項在Loading段:過錫爐前須100%確認排PIN平貼 PCB板,確保重新過錫爐後無PIN浮高. • 修改MOI在包裝的外觀 總檢站:增加重點Check 背板單體內排PIN不可浮高. • 電源模塊FSA035-00BG的改善對策:依客戶要求, 做治具管控 機殼尺寸上下限 (39.0+/0.3MM). 9/20 設計品質

More Related