Thermal fogging equipment

1. Use Thermal fogging equipment to solve different insecticide and pesticide problem: Thermal fogging equipment is a device that is used to solve pest problems in the outdoor area. You can find three types of thermal fogging equipments available in market: fuel floggers, gas foggers and electricity powered foggers. All these foggers use heat to vaporize the solution and create dark fog or mist that penetrates hard to reach the outdoor areas. Thermal fogging equipment is oftenly used for pest control. Operation: Thermal fogging equipment uses heat to vaporize fogging solution and spray it out in the form of mist or fog. The insecticide then filled in the container that is located either below or in the body of the fogger. Normally the capacity of the storage tank is approximately 40 or 1.1l. They are equipped with thermal barrel that gets preheated to high temperature by either using electricity or propane gas depending on type fogger. Earlier this solution is in the liquid form which later on gets vaporized as it gets pumped into the heat barrel. The fogger produces large amount of particles in an extremely small size that all together makes a dense cloud of the fog. As discussed above there are three types of equipments available. All the three are pretty similar in their looks the only difference is in the way of working. Gas fogger uses propane gas to preheat the heat assembly. For this a gas cylinder need to be mounted with it. Electric foggers come with electric cables that need to be plugged in electricity outlet.

2. Particle sizes: The particle size of the foggers will depend on the model of the fogger. Thermal foggers produce 0.5-10 micron range and generally it will produce particles that are small in size. These can penetrate in very small areas either outdoor or indoor. The fog produced by it is easily viable that controls the direction of fog and allows better control. Things to keep in mind: Thermal fogger is mostly used for outdoor fogging and majority of thermal fogging equipments are made for outdoor use. Infact these equipments are not made for indoor purposes, this is due to the reason that these appliances work with high temperatures that are not fit for indoor purposes. Also, if the assembly does not reach a sufficient temperature, the insecticide begins to drip down instead of converting into fog. These insecticides once drip down leave hard stains to clean. Thus it is not advisable for indoor use. Uses of thermal fogging equipments: Mosquito and insect control: from 5-20 microns. Thermal fogging equipments produce particles in this range, thus they are good for insect control. For mosquito and insects control the best droplet size range    Control direction of fogging: and thick thus it is easy to control the direction of fogging. Due to this an outdoor fogging will be more controlled. The fog that is produced by thermal fogging is easily visible   Can reach in many obstructed areas produced by thermal fogger can reach in small gaps such as walls cracks, floor gaps, thick bushes, indoor places, long grass, high tree top etc. : As the size of the particles is small, the fog thus Contact Us: Address: American Longray LLC 23287 Foley Street, Unit B Hayward, CA 94545

3. Phone: (415) 830-9494 Website: https://www.pestgoaway.com/