1 / 17

PREPARING CEMENTS

PREPARING CEMENTS . PREPARING CEMENTS. INSTRUCTIONS FOR PREPARING POWDER. shake powder before use don‘t compress powder in the measuring scoop. PREPARING CEMENTS. INSTRUCTIONS FOR PREPARING POWDER .

aziza
Download Presentation

PREPARING CEMENTS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PREPARING CEMENTS

  2. PREPARING CEMENTS INSTRUCTIONS FOR PREPARING POWDER • shake powder before use • don‘t compress powder in the measuring scoop

  3. PREPARING CEMENTS INSTRUCTIONS FOR PREPARING POWDER • Overfill the measuring scoop with powder and then remove surplus powder using the edge of the cut-offinsert inthe bottle neck.

  4. PREPARING CEMENTS INSTRUCTIONS FOR PREPARING LIQUID • hold the bottle vertically when dosing liquid • to achieve optimum drop size, squeeze the bottle gently • any dried material must be removed from the dropper

  5. PREPARING KAVITAN MIXING RATIO KAVITAN PRO 3,5g : 1g=1measuring scoop :1drop of liquid KAVITAN PLUS 2,7g : 1g =1measuring scoop :1drop of liquid KAVITAN CEM 1,4g : 1g =1measuring scoop :2drops of liquid

  6. PREPARING KAVITAN • Place powder and liquid on a smooth disposable paper pad or a glass plate • add powder to liquid in 2 – 4 doses • mix powder and liquid using a plastic or stainless spatula at the shortest possible time (max. 30 – 45 s.) • Properly prepared cement is homogenous, flexible andnon-adhesive material

  7. PREPARING KAVITAN KAVITAN PLUS PREPARATION • MIXING TIME30 – 45 s • WORKING TIME 2 – 3 min • MANIPULATING TIME min. 1:30 min • SETTING TIME min. 5 min KAVITAN PRO PREPARATION • MIXING TIME30 – 45 s • WORKING TIME 2 – 3 min • MANIPULATING TIME min. 1:30 min • SETTING TIME min. 4 min

  8. PREPARING KAVITAN LC • mixing ratio of KAVITAN LC: 1measuring scoop of powder 2drops of liquid • Add powder to liquid in 2 – 4 doses

  9. PREPARING KAVITAN LC • mixing time max.30 – 45 sec • density of putty, bright finish

  10. PREPARING KAVITAN LC WORKING TIME Polymerization 20s Mixing Working time 30 - 45s 3 min

  11. PREPARING ADHESOR MIXING RATIO a)Base Layersand Fillings 2,30g : 0,80g =2measuring scoops of powder :3drops of liquid MIXING TIME2 – 2:30 min WORKING TIME 4 – 4:30 min SETTING TIME6 – 7 min

  12. PREPARING ADHESOR MIXING RATIO b)Fixed Bridge Bonding 1,40g : 0,80g =2measuring scoops of powder :5drops of liquid MIXING TIME1 – 1:30 min WORKING TIME 3 – 4 min SETTING TIME 6 – 8 min

  13. PREPARING ADHESOR MIXING PROCEDURE • mix on a glass plate with stainless spatula at • 23 ± 1 ºC (to prolong the working time, mixing at 20 ºC is recommended) • divide powder into 8 – 12 partsand gradually, slowly mix in to avoid lumps

  14. PREPARING CEMENT Mistakes in preparation • Incorrect dose of powder or liquid • Differing size of drop while measuring • Inadequate mixing of whole amount of powder into liquid • The dropper must be kept clean

  15. PREPARING CEMENTS TIPS • Before turning the bottle to the vertical position, hold it at an angle of 45ºto remove air bubbles

  16. STORING CEMENTS • in a cold and dry place in a well sealed inner container • at temperature 5 ºC to 25 ºC • avoid temperature higher than 25 ºC !!! Seal the bottle and the jar carefully after withdrawing powder and liquid !!!!

  17. Thank you for your attention!

More Related