80 likes | 93 Views
MVD requirements & simulations. TAG Tracking. MVD Design: Rev 14b. ~540 modules in 4 barrel & 6 disk layers Geometry: pixel barrels at R= 27; 50 mm strip barrels at R= 75; 125 mm 2 single sided pixel disks at Z= 20; 40 mm 4 double sided mixed disks at Z =60; 85; 145; 185 mm
E N D
MVD requirements & simulations TAG Tracking Fabian Hügging, IKP 1, Forschungszentrum Jülich
MVD Design: Rev 14b • ~540 modules in 4 barrel & 6 disk layers • Geometry: • pixel barrels at R= 27; 50 mm • strip barrels at R= 75; 125 mm • 2 single sided pixel disks at Z= 20; 40 mm • 4 double sided mixed disks at Z =60; 85; 145; 185 mm • closest distance to beam-pipe: 2 mm (disks) • overall length: 40 cm • 140 pixel modules • 0.15 m2 active silicon • ~6.5 Mio readout channels • 400 strip modules • 0.5 m2 active silicon • ~70,000 readout channels • 2 kW power dissipation inside the MVD Fabian Hügging, IKP 1, Forschungszentrum Jülich
Basic requirements for MVD: pixel • spatial resolution in r-phi < 100µm (for momentum measurement) • spatial resolution in z < 100µm (especially for D-tagging) • time resolution < 50ns (for separation of ‘DC’-beam 107 events/s) • triggerless readout track rate up to 720 kHz (peak) and 54 kHz (average) per chip of size 7.6x8.2mm2 • low material < 1.2 % per layer (for low momentum particle tracking) • modest radiation hardness ~3x1014 neq / cm2 • moderate occupancy up to 16 kHz (peak) and 350 Hz (average) for 50x400µm2 • amplitudemeasurement dE/dx for particle identification Fabian Hügging, IKP 1, Forschungszentrum Jülich
Basic requirements for MVD: strip • spatial resolution in r-phi < 100µm (for momentum measurement), to be confirmed by simulations. • spatial resolution in z < 100µm, to be confirmed • time resolution at least < 50ns (for separation of ‘DC’-beam 107 events/s); better < 2ns (for DAQ event de-convolution and ToF) • triggerless readout simulations underway • occupancy simulations underway • low material < 1% per layer (for low momentum particle tracking) • modest radiation hardness ~1014 neq / cm2 • amplitudemeasurement dE/dx for particle identification Fabian Hügging, IKP 1, Forschungszentrum Jülich
Simulations: defining FE electronics • Data loads (strip and pixel part) • rates & rate distributions – peak rates, average rates • energy deposit - global and locally, peak and average define dynamic range Channels: background pp & pA FoM: track rate, hit rate, data rate, occupancy & dynamic range • time structure and ordering (strip and pixel part) • latency distributions • beam fluctuations on various timescales • overlapping of events Channels: background pp & pA FoM: time resolution, occupancy & dynamic range of timing informations Note: these simulations need input/interactions with dedicated electronics simulations! Fabian Hügging, IKP 1, Forschungszentrum Jülich
Simulations: geometry optimization (1) • variation of pixel size and shapes • [50x400 µm²]; 100x100 µm²; 50x200 µm²; 200x50 µm² • different relative orientations of layers Channel: pp DD FoM: position resolution & vertex resolution • strip optimization • modules size and shape • rectangular vs wedge for the disks • pitch sizes Channel: pp DD FoM: position resolution & vertex resolution • positions of forward disks and barrels ‘strangeness layout’ vs. ‘charm layout’ • number and position of disks • Layout of disks – only pixel, mixture of strips and pixel • barrel layer radii Channels:pp DD, pp ΛΛ FoM: secondary vertex resolution, momentum resolution (?) Fabian Hügging, IKP 1, Forschungszentrum Jülich
Simulations: geometry optimization (2) • variation of sensor thickness (strips and pixels) • 200 µm - 100 µm Channels: pp DD FoM: position resolution, signal resolution, dE/dx resolution • sensor sizes and shapes (to optimize material) • size and dead zone ratio (for pixel) • arrangement options: overlap layout vs straight layout (for pixel and strip) Channels: pp D*D* FoM: position resolution, momentum resolution, vertex resolution • structural support, services (cables, cooling,…) • different inhomogeneous distributions • identify areas to put things Channels: pp D*D* FoM: position resolution, momentum resolution, vertex resolution • other layout option • effect of target pipe hole • constant radius vs. constant angle for beam pipe Channels: pp D*D* FoM: position resolution, momentum resolution, vertex resolution Fabian Hügging, IKP 1, Forschungszentrum Jülich
Simulations: optimization of performance goals • optimize D*D* (DD) resolving power • input needed: efficiency / purity requirements to be settled! • limited amount of variation, strategy: • key parameters to be defined after basic geometry optimization! • keep a number of constraints that are already “established” • respect boundary conditions! • optimize D*D* (or DD), then check background performance • Channels: pp DD and pp D*D* FoM: D* and D-tag efficiency and purity, secondary vertex resolution Fabian Hügging, IKP 1, Forschungszentrum Jülich