1 / 1

Help Us Prevent Injuries by Eliminating Hazards

Help Us Prevent Injuries by Eliminating Hazards. Think before you work Recognize potential problems Fix unsafe conditions. Avoiding Slips, Trips and Falls. General Precautions Slips, trips, and falls have been a dangerous reality for far too many of our employees.

bathsheba
Download Presentation

Help Us Prevent Injuries by Eliminating Hazards

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Help Us Prevent Injuries by Eliminating Hazards • Think before you work • Recognize potential problems • Fix unsafe conditions Avoiding Slips, Trips and Falls • General Precautions • Slips, trips, and falls have been a dangerous reality for far too many of our employees. • Nearly half of the injuries suffered by XXXXX XXXXXXXX employees during the winter • months are from some sort of slip, trip, or fall. Some of these injuries have resulted in • serious career and life altering injuries. DON’T LET YOURSELF BE THE NEXT VICTIM! • Falls are dangerous but even a slip can cause serious injury!Joints of the upper • extremities and back can also be injured when a slip causes you to “grab-on” to avoid a fall. • Head, back, neck, knee, and ankle are common injuries from falls but just a slip can often • cause hyperextensions or sprains of shoulders, wrists, elbows, and necks are just a few of • the upper extremities that our employees injured in slips and falls last season. • Don’t get in a hurry! When walking on slick, uneven, or loose terrain, take the time to • check your path carefully and treat it as a serious threat to your health and well-being. • Follow these basic safety procedures at all times: • 1) Wear your PPE. Wear steel toed • boots with aggressive tread and ankle • support. • 2) Use fall protection over 6-feet if • handrails are not present. • 3) Never walk with the view or your • path obstructed by something you • are carrying. • 4) Keep your work area clean! A clean • work area is a safe work area. • 5) Take the time conditions require to • walk, climb, or travel safely to your • destination. Never run in the work place unless it is an emergency. • SLIPS • Slips hazards can be created by many conditions. Oil and fluid spills, dirty or wet walking • surfaces, damaged or worn steps, and accumulation of ice and snow to mention a few. Wet • surfaces are common at our facilities and can be especially dangerous when steps and • ladders on equipment are worn smooth or when freezing conditions exist. We must • continually clean up after ourselves and conduct regular site inspections in order to identify • and correct hazards before people get hurt. Below are some tips for avoiding slip hazards: • Clean up spills right away. Use floor dry on oil spills immediately. Clean up spilled liquids even if you were not the one who spilled it. • Don’t let grease accumulate on equipment or floors. Keep the engine compartment and frame clean in areas where you step up to wash windows or check fluids. • WIPE YOUR FEET! Track-in can be dangerous. Be cautious on smooth surfaces such as concrete floors or tile when your shoes are wet or muddy. Clean your shoes before accessing ladders, steps, or other slick surfaces. • Take small, deliberate steps to keep your body’s center of gravity directly over your feet. • Avoid loose, uneven surfaces. Ruts, dirt clods, rocks, and other loose surfaces can cause you to slip, fall, or twist ankles and knees. • Keep salt, sand, brooms, and shovels handy to keep pathways safe for pedestrians. Plant managers are responsible for monitoring and maintaining safe walkways. • Use non-skid materials such as tape, sprays, or expanded metal to keep worn steps and other slick surfaces safe. • Use any handrails, grab bars, or other fixed objects to help prevent slipping. • Inspect your workplace and equipment. Look for defects in ladders, loose material, ice, snow, and mud buildup. • Be careful when stepping out of a door or building. Many slips occur during the transition from indoor to outdoor conditions. • Falls from Height • Falls from height are especially dangerous. Falls from just a few feet can • cause serious injury and even death. Often we underestimate the danger • of common tasks such as climbing portable ladders, accessing large • machinery, or working on elevated surfaces. One small mistake can • result in life altering injuries. Please read the tips for avoiding falls from • height and incorporate them into your daily practices. • Inspect ladders and handrails. Make immediate repairs of defects or remove the defective equipment from service. • Don’t Jump!A jump is a planned fall and can be just as dangerous as any other. • Wear fall protection when working over 6-feet off the ground without handrails. Handrails are required on all working surfaces 4-feet or more above the next level. • Don’t reach or overextend your body outside the rails of a ladder. Your feet could slip or the ladder could fall if you move too far off your center of balance. • Tie–off when working from a ladder. If you perform • work from a ladder, over 6-feet above the ground, find a secure place to tie-off. • Keep your hands free when climbing. Many falls are caused by hoses, brushes, tools, or other objects • interfering with our grip while climbing. • Maintain 3-points of contact at all times while climbing. • Never climb/stand on handrails. Take the time to get a ladder if you must access an area above the platform you are working from. Use fall protection if your work puts you at risk of falling outside the handrails! • Always face your equipment when exiting your equipment. It is much easier to control your decent and avoid a fall from this position. • Train and maintain fall protection systems. The proper equipment and training MUST be available for employees working at height. A harness, lanyard, and anchor devices are the basics. Inspect all equipment before each use and replace as signs of wear and tear appear. Sweep for Safety!! Use your broom to keep stairs, steps, and floors free of “loose footing” hazards • Weather Issues • Weather creates some of the most difficult challenges when dealing with slip • and fall hazards. Ice and snow can build up quickly and melting snow and • rain can create muddy, slick conditions that require near constant attention. • Extra caution and work is required to address these hazards. Plant managers • must train their employees to help control and identify hazards so they can be • addressed quickly. • Plan for extra time and manpower when working in severe weather conditions. In addition to plant issues, plowing, snow removal, sanding, and salting of walkways may be required to keep conditions safe for pedestrians and vehicles. • Keep your equipment safe. Snow and ice on steps and platforms can create serious hazards while entering and exiting equipment. • Be very careful on jobsites. Park in areas where the terrain is the most favorable for walking. Use your vehicle for support when you must walk to the back of the truck on a slick surface. • Plan the best route. Take the time to avoid loose material, ice, snow and mud when walking. • Monitor weather reports and develop plans to deal with chronic issues like ice build up at water stations, mud track-in, snow plowing, salt and sand supply. Empty hands before climbing • Trip Hazards • Most trip hazards result from poor housekeeping and failure to watch • your path while walking. Care should be taken not to allow clutter • to build up in our work areas. When working on jobsites not controlled • by XXXXXXXXXXXXXX, it may not be possible to control housekeeping • practices. On these sites, it is imperative to carefully watch where • you are walking and monitor what is going on around you. Jobsite • clutter, ground conditions, and traffic can pose a hazard to pedestrians. • Below are some tips for avoiding falls resulting from trip hazards: • Only carry loads you can see over. If possible carry the load on your shoulder, not in front of you. If your load is to large or bulky to see your path get assistance or use a dolly. • Store materials and tools in cabinets or other assigned storage. Don’t let them lay around! • Route extension cords/hoses safely. Keep them out of walkways. Don’t leave cords/hoses laying unattended in areas where they could cause a trip hazard. Hang them UP! • Keep your work area clean and maintain stair/ramps. Remove “loose footing” hazards and keep steps, ramps, floors and stairs secure, clean, and free of debris. • Make sure worksites are well lit. Keep lights in working order and use supplemental lighting as required. • Keep your focus in front of you. Cell phones, activity, and conversation, may distract you from watching your path. Make sure to look ahead even when performing other tasks. Look at the ground before stepping off equipment and ladders

More Related