1 / 5

How to Prepare Surface of Rough Cedar Lumber

The wood surface is rough cedar lumber comes in its rustic appearance and fine finishing levels. The material in rough cedar lumber is not as absorbent as the traditional milled lumber is

Download Presentation

How to Prepare Surface of Rough Cedar Lumber

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Prepare Surface of Rough Cedar Lumber

  2. Looking to Have Durability in the Building and Construction Material? The wood surface in rough cedar lumber comes in its rustic appearance and fine finishing levels. The material in rough cedar lumber is not as absorbent as the traditional milled lumber is. Its surface is prepared by selecting the finishing type and its maintenance levels.

  3. Preparation of Surface • The covering of Rough Cedar Lumber must be washed with a good quality wood cleaner. • Later, follow it up with usage of a high-quality brightener. • The wood cleaner ensures removal of grime and dirt present on the wood’s surface. • It opens up the pores present in the wood that ensures chances of penetrating deep inside. • Let the cleaner sit in for at least 30 minutes and apply nylon scrub brush on it to scrub properly. • Rinse it thoroughly with the water at the end to give it a smooth finish. • The acid present in the brighteners for rough cedar lumber helps in smoothening the tannins. • Apply the brightener right after rinsing to keep the wet wood. Let it stay for 50 minutes and then clean it off.

  4. Preparation of Surface Even if you get the rough cedar lumber painted, you will have to forget the unique look that it offers with its rough cuts.

  5. THANK YOU

More Related