110 likes | 329 Views
KX-TDA200/100 System ( Production Version 2.02 ). Panasonic Communications Co., Ltd. Office Network Company Edition 1.0 31 May, 2006. Chapter 2 Centralized VM. Function. 1. Centralized VM. 1.Centralized VM (1/8). (1)Description.
E N D
KX-TDA200/100 System(Production Version 2.02) Panasonic Communications Co., Ltd. Office Network Company Edition 1.0 31 May, 2006 Chapter 2Centralized VM
Function 1. Centralized VM
1.Centralized VM (1/8) (1)Description - Up to 8 PBXs connected in a VoIP or ISDN private network can share. - Message Waiting notifications available to use. Note; The following VPS features are not available at extensions in a network 1 Automatic Configuration - Quick Setup 2 Transferring to a Mailbox of the VPS 3 Transfer Recall to a Mailbox of the VPS 4 Paging by the VPS 5 Live Call Screening (LCS) 6 Two-way Recording into the VPS 7 VPS Data Control by the PBX 8 Remote FWD Setting by the VM 9 VM LCD 10 Message clear on Check Out
1.Centralized VM (2/8) (2)Sample configuration Public CO QSIG Standard Information Caller ID : 0312345678Caller ID Name : Mike SmithCalling ID : 166 QSIG Enhanced Information Public DDI : 3302 Fwd by : 202 (No Answer) VM TRG No. : 01 Time mode : Night Caller ID : 0312345678Caller ID Name : Mike SmithPublic DDI : 3302 + FWD No Answer to 166 Caller ID : 0312345678Caller ID Name : Mike SmithPublic DDI : 3302 Fwd : 202 (No Answer) VM TRG No. : 01 Time mode : Night EXT101 EXT166 (VM Group) EXT201 EXT202(Tom Green) “Hello this is Tom.I am not at my desk…..” KX-TVA/TVM (Centralized VM) Mailbox 101 102 201 202 301 302 303
1.Centralized VM (3/8) (3)Programming (1/4) Step 1 Assign TIE Table Only Extension Number Method <Enable> QSIG Enhanced Information (Public DDI, Fwd by, VM TRG No., Time mode)to be sent from the PBX to which the VPS is attached to extensions connected to other PBXs in the network.
1.Centralized VM (4/8) (3)Programming (2/4) Step 2 Assign Network Data Transmission - Specifies the number of times re-transmission of network message waiting notifications is repeated before being cancelled. (0-10) - Specifies the length of time between repeated re-transmission of network message waiting notifications. (10-240 s)
1.Centralized VM (5/8) (3)Programming (3/4) Step 3 Assign Miscellaneous - Enables error information to be logged in the PBX if network message waiting information is deleted after re-transmission is repeated for the number of times specified in Network MSW Data Transmission for Centralized VM Feature. - Enables error information to be logged in the PBX if the quantity of network message waiting information being re-transmitted is larger than the transmission buffer.
1.Centralized VM (6/8) (3)Programming (4/4) Step 4 Assign ISDN Standard Mode for PRI23 Card <ISDN Standard mode> The CCBS, CF, CT, and Centralized VM features are supported. DIL and DID call distribution are available for the D channel. <T1-LCOT mode> DIL and DID call distribution are available for all 23B channels. The CCBS, CF, CT, and Centralized VM features are not available in this mode.
1.Centralized VM (7/8) (4)Condition (1/2) • - Hardware Requirement • KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card • must be installed in the PBX connected to the VPS, and in all PBXs that will use this feature. • - All PBXs in the network must be TDA-series PBXs. • - Only KX-TVA/KX-TVM series VPSs connected using DPT integration support this feature. • - Only extension numbers of 4 digits or less, using the Extension Number Method, are supported. • - Mailboxes for extensions connected to other PBXs in the network must be set up manually. • - An extension can receive Message Waiting notifications from multiple VPSs connected to PBXs in • the network. • (When multiple notifications of the number of unheard messages in an extension user’s message box • are sent from different VPSs, the most recent notification will be displayed.) • A flexible button cannot be customized as a Message Waiting button for another extension at a • different PBX. • Whether or not Enhanced QSIG information is transmitted can be set in the TIE table. • When PBXs are connected by PRI23 cards, the card must be set to ISDN Standard mode. • If set to T1 mode, the card must be removed and reinstalled to allow the mode to be changed.
1.Centralized VM (8/8) (4)Condition (2/2) -Transfer to Mailbox It is possible to transfer calls to a mailbox of a VPS at another PBX, by creating a flexible button containing the following: [T] + extension number of VPS at other PBX + [P] + [#] + 6 Then, the extension user can transfer calls to a mailbox by pressing this key, entering the mailbox number, and going on hook. -Minor error “50 Network MSW was not transmitted. (Programming is incorrect.)" This error message is used for the centralized voice mail. VPS send the message waiting lamp clear command to PBX for the telephone, if there is no message in the mailbox. And, PBX send this command to other PBX, if there is no extension for this message command in the PBX. Then, this error message is displayed, if there is no other PBX. Therefore, please delete if there are the mail boxes in the VM which are not used. <For example> Message manager's extension is assigned "9" (or "0"). Please assign actual EXT. number for message manager, instead of operator call number.
Chapter 2Centralized VM Thank you very much !