1 / 22

Jointer

Jointer. Overview. Used to true the edge of a board 2nd machine in procedural order. Fence. Blade Swing Guard. Outfeed Table. Infeed Table. On/Off Switch. How long is my board?. Needs to be 10” or longer. Depth of cut should…. … NOT exceed 1/8”. Keep the swing guard.

bettygarrett
Download Presentation

Jointer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jointer

  2. Overview Used to true the edge of a board 2nd machine in procedural order

  3. Fence Blade Swing Guard Outfeed Table Infeed Table On/Off Switch

  4. How long is my board? Needs to be 10” or longer

  5. Depth of cut should… …NOT exceed 1/8”

  6. Keep the swing guard …over the blades

  7. Pick one edge to joint

  8. Always wear your safety glasses

  9. Turn the jointer on Press the GREEN button

  10. Push it through smoothly Repeat as needed

  11. Now your board has… …a smooth edge

  12. Turn the jointer off Press the RED button

  13. Danger!! Use a Push Stick!

  14. Safe!! Use a Push Stick!

  15. Safe to use hands if… board is higher than fence

  16. Danger!! Do NOT joint end grain

  17. The end splits out Do NOT joint end grain

  18. Danger Overview • Using stock that’s width is less than the height of the fence without a push stick. • Using stock that is less than 10 inches long. • Removing more than 1/8 of an inch per pass. • Standing directly behind the wood—possible kickback

  19. Before you start… …answer these questions • How long is my board? • Which edge do I want to joint?

  20. Review • What is the minimum length of stock to be run through the jointer? • 10 inches • How much material may be removed in one pass? • 1/8 of an inch • Should both edges be jointed? • No, the edges won’t be parallel

  21. Review • What is the margin of safety? • 4 inches • When do you use a push stick? • If the board’s width is less than the fence’s height • Where should the guard be? • Over the blade • Should end grain be jointed? • No, the ends will chips

  22. Questions?Comments?

More Related