1 / 13

Air Pollution Source Permitting

Air Pollution Source Permitting. For Boat Manufacturers The Boat Manufacturing MACT  an EPA Workshop February 8, 2002 IBEX conference Ft. Lauderdale Convention Center. Nationwide Permitting…. A Boat Manufacturing facility that is subject to the NESHAP standard 40 CFR 63 Subpart VVVV

bina
Download Presentation

Air Pollution Source Permitting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Air Pollution Source Permitting For Boat Manufacturers The Boat Manufacturing MACT  an EPA Workshop February 8, 2002 IBEX conference Ft. Lauderdale Convention Center

  2. Nationwide Permitting… A Boat Manufacturing facility that is subject to the NESHAP standard 40 CFR 63 Subpart VVVV • is a major source of hazardous air pollutants (HAPs) • and should already have a Title V (Part 70) Permit. However, at this point in time, unless it is also a major source of volatile organic compounds (VOCs) there may not be much more than recordkeeping requirements in the permit.

  3. Nationwide Permitting (cont’d)… • Reopening of the Title V Permit for Cause when additional requirements become applicable. • Title V permits with expiration dates of August 22, 2004 or later, must be reopened and significantly modified by February 22, 2003 to include the NESHAP requirements.

  4. Nationwide Permitting (cont’d)… • Reopening of the Title V Permit for Cause when additional requirements become applicable (cont’d)… • Proceedings to reopen and reissue a permit • shall follow the same procedures as apply to initial permit issuance, and • shall affect only those parts of the permit for which cause to reopen exists.

  5. Nationwide permitting (cont’d)… • In order to escape complying with the NEHSAP regulations, an existing facility that is currently a major facility has until the compliance date of the NESHAP (August 23, 2004) to become permitted as a non-major (area) source. • If a facility uses the material consumption option described in Sec. 63.5686(b) to demonstrate that it is not a major source, the facility must start keeping records no later than August 23, 2003.

  6. Florida Permitting for Area Source Boat Manufacturers • Permitting Options • Federally Enforceable State Operation Permit (FESOP) • Air Construction / Air Operation Permits • Non-Title V General Permit • Exemption

  7. Florida Permitting for Area Source Boat Manufacturers(cont’d) • Permitting Options (cont’d) • Federally Enforceable State Operation Permit (FESOP) • Good choice for a facility that is currently a major source and wants to become an area source • Good choice for an existing area source that has never had an air construction permit and can not qualify for a General Permit.

  8. Florida Permitting for Area Source Boat Manufacturers(cont’d) • Permitting Options (cont’d) • Air Construction / Air Operation Permits • Good for a new area source facility thatcan not qualify for a General Permit.

  9. Florida Permitting for Area Source Boat Manufacturers(cont’d) • Permitting Options (cont’d) • Non-Title V General Permit (GP) for “Polyester Resin Plastic Products Fabrication” • Good for most area sources. • Gap in material consumption applicability criteria for General Permit and applicability of NESHAP. • GP limit: 38 tons per year (tpy) • NESHAP limit: less than 50 tpy

  10. Florida Permitting for Area Source Boat Manufacturers(cont’d) • Permit Exemption (No Permit Required) • Generic Facility Exemption if the facility emits or has the potential to emit … • Less than 1 tpy of any hazardous air pollutant; • Less than 2.5 tpy of total hazardous air pollutants; • Less than 25 tpy of CO, NOX, and SO2; • Less than 1000 pounds per year of lead; and • Less than 10 tpy of any other regulated pollutant [example: Volatile Organic Compounds (VOCs)] …and there are no unit-specific applicable requirements.

  11. For further information call…

  12. Florida Permitting Authorities District Air ProgramsPhone # West Palm Beach 561-681-6600 Ft. Myers 941-332-6975 Orlando 407-894-7555 Tampa 813-744-6100 Jacksonville 904-807-3300 Pensacola 850-595-8300

  13. Florida Permitting Authorities(cont’d) Local Air ProgramsPhone # Broward County 954-519-1220 Dade County 305-372-6925 Palm Beach County 561-355-3070 City of Jacksonville 904-630-4900 Orange County 407-836-1447 Hillsborough County 813-272-5530 Sarasota County 941-378-6128

More Related