1 / 36

impression material

impression material. DR. zaher A. madi. Impression materials. Impression Its a negative reproduction of details of the prepared teeth ,adjacent teeth , and surrounding soft tissue . Obtaining the impression is the first step necessary to indirect fabrication of the prosthesis .

boaz
Download Presentation

impression material

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. impression material DR. zaher A. madi

  2. Impression materials Impression Its a negative reproduction of details of the prepared teeth ,adjacent teeth , and surrounding soft tissue . Obtaining the impression is the first step necessary to indirect fabrication of the prosthesis . Types of impression 1-Zinc-oxide egenoul impression material 2-Compound impression material 3-Irreversable impression material (Alginate) 4-Elastomeric impression material

  3. Characteristics (properties ) of the ideal impression material to be clinically acceptable 1- to be nontoxic and non-irritant. 2- have acceptable odor , and taste. (relief of gagging reflex) 3- have suitable working and setting times . 4- have strength to resist tearing .

  4. 5- have sufficient plasticity and fluidity before curing. To easy seating in mouth and to record fine details of finish lines and preparations. 6- have complete elasticity after curing. To allow removal from the mouth and from the undercuts without any deformations of impression . 7- have optimal dimensional stability. Its important , that the impression should be stable in dimension after curing without any changes and shrinkage until its transporting in laboratory and pouring . 8- impression material should be easy to use , mix and manipulation .

  5. Zinc-oxide egenoul impression material ,used to make impression with individual tray for more details and outlines in edentulous arches for complete denture 1- Zinc - oxide egenoul impression Impression paste Caves outline Impression paste

  6. Impression paste (z.O.E)

  7. It’s a thermoplastic impression material in cakes and sticks form used as a base (primary) impression for edentulous and partially edentulous arches ,and used to correct outlines (periphery) of individual tray to make functional (secondary) impression for complete denture Its hard material and soften by heating ( hot water) 2- compound impression Compound stick - Kerr

  8. Peripheral impression ( border molding) for secondary (functional impression)

  9. *The alginate impression material consist of basic ingredient – soluble salt (sodium) of alginic acid , which derived from seaweed and another chemicals as filler – gypsum (Ca So4)2.H2o + Barium sulfate (BaSo4) + sodium carbonate (Na2Co3) . * Soluble salt (sodium) of alginic acid in water make colloid system – gel ,which after become hard by irreversible chemical reaction – gypsum returns soluble gel of sodium alginate to insoluble calcium alginate (hard). * Alginate impression material is used to obtain impression for removable complete and partial dentures , for casts of opposing teeth to bite registration ( occlusion ) , for diagnostic casts in orthodontics to study the models and for fabrication of removable orthodontic appliances . 3- Alginate impression - irreversible hydrocolloid

  10. Product name Alginmajor (major) – tropicalgin , hydrogum (zhermack) , tulip (cavex) , dentalgin

  11. Step – by – step impression taking 1 2 3 Loading into tray Powder + water measuring Mixing in rubber bowel 4 5 6 Complete impression after removal from mouth Inserting tray in mouth Setting alginate in the mouth

  12. Alginot – alternative traditional alginate automixing system

  13. Indications to use 1- diagnostic study casts 2- opposing arch impressions for mounting and occlusion record Adantages 1- hydrofphlic 2- fast setting 3- easily poured 4- used with stock and custom trays (perforated ) 5- inexpensive

  14. Disadvantages 1- low flow , there for cannot record fine detalis 2-low tear strength ,therefore thin margins may tear upon removal of impression from the mouth 3- low dimensional stability due to synersis and imbibtion 4- single pour and cannot another time pour ( after removal of poured stone model from impression ,its become teared)

  15. They are synthetic rubber and formed by chemical reaction the process of changing the elastomeric base into final rubber-like material known as polymerization There are 4 types of elastomeric impression material : A- polysulfide rubber (polymer) – (as permlastic – kerr) B- polyether (as impregum material for monophase technique -espe) C- condensation silicone D- addition silicone (poly-vinylsilaxone) 4- Elastomeric impression material

  16. This impression material is a silicone-based polymer called a poly(dimethylsilaxone) – liquid Polymer is mixed with a powder silica (alkyl silicate) to form a paste (base paste) . Polymerization of material occurs by a condensation reaction between silicone base ( polymer) and alkyl-silicate in the presence of a catalyst (accelerator) . The by-product of the reaction is ethyl alcohol , which is lost by evaporation causing a dimensional contraction (shrinkage) , for that need to use a correction paste (light-bodied paste). Condensation silicone (C-silicone)

  17. C-silicone consist of heavy putty (base paste) – light body (correction paste) – and catalyst . Impression with C-silicone can make by two-phase (sandwich technique) This material is hand mixing and consist of : 1- Heavy body – as base paste 2- Light body – as correction paste 3- And catalyst – as accelerator Impression with C-silicone make by : two-stage techniqueand one-stage sandwich technique(wash putty technique or double technique)

  18. Product name Zetaplus – (zhermack) – protesil (vannini) – condensil (septodont) –coltofllex (coltene)

  19. C- silicone impression material ( sandwish technique) Heavy body Light body Base paste Correction paste

  20. Advantages 1- provided in all viscosities , good handling properties 2- adequate working time and setting time 3- reasonable tear strength 4- accuracy is improved by minimal polymerization shrink 5- pour within 24 – 48 hours Disadvantages 1- dimensional changes on storage due to loss of ethyl alcohol therefore pour within 24 hours 2- hydrophobic ,therefor require dry field (to prevent fomation bubbels in impresstion) 3- poor wetting , therefore difficult to pour

  21. Sandwish technique (putty wash technique) Its usually used with condesation and addition cured silicones , stock trays is usually used to high viscosity of the putty material . Step – by – step procedure 1- Give anesthesia 2- Select a suitable stock tray ( shape and size ) 3- Apply retaction cord around the prepared teeth (remove after 10 min) 4- Isolate and dry the area to eliminate bubbels formation 5- Dispense equal amount of base and catalyst then knead till homogeonous mix is obtained 6- Roll the material and place(load) it into the stock tray

  22. 7- Seat the putty loaded tray inside the patient`s mouth 8- After setting remove the putty impression 9- relieve the impression with sharp knife to remove areas of severe undercuts and interdental areas as those areas may prevent resating of the putty impression 10 – Squeeze out equal length s of light body material and catalyst and mix with a spatual till homogenous mix occurs ( or use automix dispenser) 11- Load part of the material into the syinge and the remaining part is then applied to the tay over the relieved impression 12 – Remove the retraction cord then immediately inject material from syringr into the sulcus of the prepared teeth 13 – Seat the loaded putty material tray in place (in the mouth again) 14 – Remove tray a fter material sets

  23. Double or putty wash technique – used stock tray 1- stock tray( double or putty wash technique) Relieving borders of heavy body impression material Full arch impression with heavy and light body impression material by double technique

  24. The base of the polymer of this silicone is a poly(vinylsilaxone) . This material is supplied with two polymers : One –terminal vinyl-group and other with terminal Hydrogen N Polymerization occurs by addition reaction between two polymers in the presence of the catalyst . After polymerization , elastic solid is formed without volatile by-product which give the material high and excellent dimensional stability Material is odor free , clean and easy to mix (automixing – hand mixing) - heavy body - light body - catalyst Techniques – sandwich technique( putty wash) –monophase technique addition silicone (A-silicone or poly-vinylsilaxone pvs) cH2 cH2

  25. hand mix – double technique Electro-mix mono phase technique Auto-mix double technique impression material Auto-mix double technique Auto-mix mono phase (one step) technique Auto-mix impression material for bite registration

  26. Impression taking - impression trays There two types of impression trays :stock tray and custom tray Stock tray is : 1- metal trays – perforated , non perforated 2- plastic trays – perforated plastic and metal trays divided to full arch trays , semi arch trays (unilateral ) , and closed-bite double arch trays . Plastic perforated full arch tray upper Metal perforated full arch tray Plastic perforated full arch tray lower Metal not perforated fullarchtray Semi arch (unilateral) tray

  27. Closed-bite double arch trays Method of taking impression Impression can be taken by ; 1- stock tray (ready made tray) 2- custom tray (acrylic tray which fabricated in lab.) 3- closed-bite double arch tray

  28. 2-custom tray– acrylic tray fabricated in lab for taking impression to removable partial denture , complete denture (individual tray ) , and for fixed partial denture

  29. 3- closed-bite double arch tray– used for double and mono-phase technique of impression taking Complete closure in centric occlusion Tray is removed with smooth and fluid movement tray is inserted in prepared teeth area Verticulator – incisal pen should be in contact in centric occlusion

  30. Common errors ofimpression 1 2

  31. 3 4

  32. 5 6

  33. 7 8

  34. 9

  35. Thanks for attention

More Related