Formal Bow Ties For Men And Boys In UAE

1. BOWTIES & GENTS How to Tie a BOW TIES

2. First Step Measuring the Bow Tie Lift up your collar Though a bow tie can be tied with the collar either up or down, you’ll have a much easier time seeing what you’re doing with the collar up, so lift it and ensure the top button of your shirt is buttoned

3. Second Step Measure your neck Stand up straight and use a tailor’s measuring tape to measure your neck starting from the base of the back of your neck and ending in the front where your collar sits at just around your Adam’s apple.

4. Third Step Size the bow tie Bow ties are one size fits all, but they have ways to adjust the length either with a slider or button holes .

5. Fourth Step Place the bow tie around your neck.  Like tying a regular necktie, one end of the bow tie needs to drape over your chest longer than the other. Position the bow tie so that one end hangs roughly 1.5 inches (3.8 cm) lower than the other end.

6. Fifth Step Cross the longer end over the shorter end. You should cross the tie near your neck so that the loop around your neck is just large enough to work with but not loose; you don’t want your bow dangling in front of your chest.

7. Sixth Step Loop the long end under where the two ends cross. With one hand hold the point where the two ends cross over the front of your collar. Take the dangling portion of the longer end and pass it behind and then up over the point of intersection.

8. Seventh Step Fold the dangling end to make a loop. Lift up the shorter end—which is still dangling—and fold it over on itself at the widest part of the bowed shape . Lift the whole portion and turn it 90 degrees, so it faces horizontal.[This will form a loop that points to the same side as the shoulder over which the longer end is resting. Hold this fold together at the skinniest part of the bow tie, which should be just in front of your Adam’s apple.

9. Eighth Step Drop the longer end over the skinny center of the bow Take the longer end off your shoulder and drape it over the skinniest part of the bow section you created in the last step.

10. Ninth Step Pinch the bow together in front of the long end Grab the left and right sides of the horizontally folded end and pinch them together in front of the dangling end.[The top of the dangling end will now be held between them.

11. Tenth Step Feed the middle of the dangling end back through the knot There will be a small gap behind the bow portion that you can see while you have it pinched forward. Fold the draping end of the bow tie on itself like you did with the short end and pull the loop from the fold through the hole.[It will now form the back half of the bow.

12. Eleventh Step Pull at the loops , That’s It . Pulling at the flat ends of the bow tie will simply untie it like pulling on the dangling strings of shoelaces, so make sure you tighten the bow tie by pulling gently at the looped portions.

13. Following These simple Step ,You can easily Tie up your Bow Tie. If You are looking to Own Formal Bow Ties For Men In UAE

14. Thanks For Watching