1 / 13

IR sample preparation

IR sample preparation. for solid samples. What is a mull?. a mull a suspension of solid sample in mineral oil It is used to make a thin-film cell from a solid sample. Thin film IR cells. Salt (NaCl) discs are used To hold the sample So the holder won’t absorb infrared light

braines
Download Presentation

IR sample preparation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IR sample preparation for solid samples

  2. What is a mull? • a mull a suspension of solid sample in mineral oil • It is used to make a thin-film cell from a solid sample

  3. Thin film IR cells • Salt (NaCl) discs are used • To hold the sample • So the holder won’t absorb infrared light • and only sample absorption is detected

  4. Sample preparation • so dry the sample well • because water etches the IR discs • and emulsifies with oil letting less light through

  5. How do I make a mull? • grind • the sample • to a smooth • powder • add mineral oil • and mix it • well

  6. What should the mull be like? • the mull • should look • and spread • like soft butter

  7. use clean glovesto work with salt discs • put on an extra pair of gloves • to protect cells • from anything aqueous on your regular gloves

  8. applying the mull • use a rubber policeman • to spread • a thin layer • on one disc • lower the 2nd disc • on top of the 1st • and twist the discs • to spread sample evenly

  9. placing discs in cell holder • use your finger • to make a platform • in the cell holder • lower in • the NaCl discs • do not wedge them

  10. gently • place lid • on top • slide into position • in light beam

  11. close • sample • compartment • remove gloves • before using • keyboard

  12. to clean discs • add a few drops • of chloroform • to each disc • rub gently • to clean off • all traces of sample • …

  13. Keep discs dry • replace • in desiccator • after cleaning • …

More Related