1 / 59

Practical Blood Bank

Practical Blood Bank. Antibody Identification. Lab 7. Antibody Presence . Presence of an antibody may be indicated by the following serological tests: A discrepancy in the results of cell and serum ABH grouping. A positive test for unexpected antibodies. A positive direct Coomb’s test.

brendy
Download Presentation

Practical Blood Bank

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Practical Blood Bank Antibody Identification Lab 7

  2. Antibody Presence Presence of an antibody may be indicated by the following serological tests: A discrepancy in the results of cell and serum ABH grouping. A positive test for unexpected antibodies. A positive direct Coomb’s test. An incompatible major cross match.

  3. The Basics….. • As we said in the previous lecture, • Antibody Screens use 2 or 3 Screening Cells to “detect” if antibodies are present in the serum • If antibodies are detected, then they should be identified…

  4. Why do we need to identify? • Antibody identification is an important component of compatibility testing • It will identify any unexpected antibodies in the patient’s serum • If a person with an antibody is exposed to donor cells with the corresponding antigen, serious side effects can occur (i.e. transfusion reactions).

  5. Key Concepts • In blood banking, we test “knowns” with “unknowns”:- • When detecting/screening and/or identifying antibodies, we test patient serum (unknown that contain blood bank antibodies) with reagent RBCs (known) Known: Unknown: Reagent RBCs + patient serum Reagent antisera + patient RBCs

  6. Reagent RBCs • Screening Red Cells and Panel Red Cells are the same with minor differences: • Screening red cells • Antibody detection/screening • Sets of only 2 or 3 vials • Panel red cells • Antibody identification • At least 10 vials/set

  7. Antibody Panel vs. Screen • An antibody panel is just an extended version of an antibody screen • The screen only uses 2-3 red cells:

  8. Antibody Panel • While antibody panel usually includes at least 10 panel cells: (8-16 group O RBCs) • Group O red blood cells obtained from donors

  9. Panel Red Cells • Each of the panel cells has been antigen typed (shown on antigram) • + refers to the presence of the antigen • 0 refers to the absence of the antigen

  10. Panel Red Cells • An autocontrol (AC) should also be run with panels

  11. Panel Red Cells • The same phases used in an antibody screen are used in a panel

  12. Antibody ID Testing • A tube is labeled for each of the panel cells plus one tube for AC

  13. IS Phase • Perform immediate spin (IS) and grade agglutination; inspect for hemolysis • Record the results in the appropriate space as shown.

  14. (LISS) 37°C Phase • 2 drops of LISS are added, mixed and incubated for 10-15 minutes. • Centrifuge and check for agglutination • Record results as previous but now fill the 37°C lane. Agglutination Viewer

  15. Grading Reactions

  16. (LISS) 37°C Phase

  17. IAT Phase (or AHG) • Indirect Antiglobulin Test (IAT) – we’re testing whether or not possible antibodies in patient’s serum will react with RBCs in vitro • To do this we use the Anti-Human Globulin reagent (AHG) • Polyspecific AHG • Monospecific Anti-IgG • Monospecific Anti-Complement

  18. IAT (AHG) Phase • Wash red cells 3X with saline (manual or automated (cell washer)) • Add 2 drops of AHG and gently mix • Centrifuge • Read for agglutination • Record reactions

  19. IAT (AHG) Phase

  20. And don’t forget…. ….add “check” cells to any negative AHG !

  21. You have agglutination…now what?

  22. Guidelines • Again, it’s important to look at: • Autocontrol • Negative - alloantibody • Positive – autoantibody or DTR (i.e. alloantibodies) • Phases • IS – cold (IgM) • 37° - cold (some have higher thermal range) or warm reacting • AHG – warm (IgG)…significant!! • Reaction strength • 1 consistent strength – one antibody • Different strengths – multiple antibodies or dosage • Matching the pattern • Single antibodies usually shows a pattern that matches one of the • Multiple antibodies are more difficult to match because they often show mixed reaction strengths

  23. Look for a matching pattern

  24. Rule of three • The rule of three must be met to confirm the presence of the antibody • How is it demonstrated? • Patient serum MUST be: • Positive with 3 panel cells with the antigen, +ve reaction. • Negative with 3 cells without the antigen and should not be reacting.

  25. Our previous example fulfills the “rule of three”

  26. What if the “rule of three” is not fulfilled? • If there are not enough cells in the panel to fulfill the rule, then additional cells from another panel could be used • Better to carry different lot numbers of panel cells

  27. Patient Antigen Typing (Phenotyping) • In addition to the rule of three, antigen typing the patient red cells can also confirm an antibody • How is this done? • Only perform this if the patient has NOT been recently transfused (donor cells could react (chimera)). • If reagent antisera (of the suspected antibody) is added to the patient RBCs, a negative reaction should result…Why?

  28. Remember Landsteiner’s Rule Individuals DO NOT make allo-antibodies against antigens they have

  29. Multiple antibodies • Multiple antibodies may be more of a challenge than a single antibody • Why? • Reaction strengths can vary • Matching the pattern is difficult

  30. So what we have to do? • Several procedures can be performed to identify multiple antibodies • Selected Cells • Neutralization • Chemical treatment • Proteolytic enzymes • Sulfhydryl reagents

  31. 1- Selected Red Cells • Selected cells are chosen from other panel or screening cells to confirm or eliminate the antibody. • The cells are “selected” from other panels because of their characteristics. • The number of selected cells needed depends on how may antibodies are identified. • Every cell should be positive only for each of the antibodies and negative for the remaining suspicious antibodies • For example: • Let’s say you ran a panel and identified 3 different antibodies (you cannot rule out): anti-S, anti-Jka, and anti-P1 • Selected cells could help…

  32. Selected Red Cells ….. Cont’d

  33. 2- Neutralization • Some antibodies may be neutralized as a way of confirmation • Commercial “substances” bind to the antibodies in the patient serum, causing them to show no reaction when tested with the corresponding antigen (in panel) • Common substances • P1 substance (derived from hydatid cyst fluid) • Lea and Lebsubstance (soluble antigen found in plasma and saliva) • Isubstance can be found in breast milk **you should be aware that many of these substances neutralize COLD antibodies; Cold antibodies can sometimes mask more clinically significant antibodies (IgG), an important reason to use neutralization techniques

  34. 3- Again: Proteolytic Enzymes • Can be used to enhance or destroy certain blood group antigens • Several enzymes exist: • Ficin (figs) • Bromelin (pineapple) • Papain (papaya) • In addition, enzyme procedures may be • One-step • Two-step

  35. Enzymes • Enzymes remove the sialic acid from the RBC membrane, thus “destroying” it and allowing other antigens to be “enhanced” • Antigens destroyed: M, N, S, s, Duffy • Antigens enhanced: Rh, Kidd, Lewis, I, and P • One-stage • Enzyme is added directly to the serum/panel cell mixture • Two-stage • Panel cells are pre-treated with an enzyme, and washed • Patient serum is added to treated panel cells and tested • If there is no agglutination after treatment, then it is assumed the enzymes destroyed the antigen

  36. Sulfhydryl Reagents • Cleave the disulfide bonds of IgM molecules and help differentiate between IgM and IgG antibodies • Good to use when you have both IgG and IgM antibodies (warm/cold) • Dithiothreitol (DTT) is a thiol and will denature Kell antigens • 2-mercaptoethanol (2-ME)

  37. Autoantibodies…. Warm & Cold Reacting

  38. Autoantibodies • Autoantibodies can be cold or warm reacting • A positive autocontrol or DAT may indicate that an auto-antibody is present • Sometimes the autocontrol may be positive, but the antibody screening may be negative, meaning something is coating the RBC

  39. Getting a positive DAT • We have focused a lot on the IAT used in antibody screening and ID, but what about the DAT? • The direct antiglobulin test (DAT) tests for the in vivo coating of RBCs with antibody (in the body) • AHG is added to washed patient red cells to determine this

  40. What can the DAT tell us? • Although not always performed in routine pretransfusion testing, a positive DAT can offer valuable information • If the patient has been transfused, the patient may have an alloantibody coating the transfused cells • If the patient has NOT been transfused, the patient may have an autoantibody coating their own cells

  41. Identifying autoantibodies Auto-antibodies can sometimes “mask” clinically significant allo-antibodies, so it’s important to differentiate between auto- and allo-antibodies

  42. Cold autoantibodies • React at room temperature with most (if not all) of the panel cells and give a positive autocontrol • The DAT is usually positive with anti-C3 AHG (detects complement) • Could be due to Mycoplasmapneumoniae, infectious mono, or cold agglutinin disease

  43. Avoiding reactivity • Cold Autoantibodies can be a trouble at times. Here are a few ways to avoid a reaction: • Use anti-IgG AHG instead of polyspecific. Most cold antibodies react with polyspecific AHG AHG because they fix complement • Skipping the IS phase avoids the attachment of cold autoantibodies to the red cells • Use 22% BSA instead of LISS

  44. Other techniques • If the antibodies remain, then prewarmed techniques can be performed: • Red cells, serum, and saline are incubated at 37° before being combined • Autoadsorption is another technique in which the autoantibody is removed from the patients serum using their own red cells The serum can be used to identify any underlying alloantibodies

  45. Warm autoantibodies • More common that cold autoantibodies • Positive DAT due to IgG antibodies coating the red cell • Again, the majority of panel or screening cells will be positive

  46. Warm autoantibodies • Cause warm autoimmune hemolytic anemia (WAIHA)… • How do you get a warm autoantibody? • Idiopathic • Known disorder (SLE, RA, leukemias, pregnancy, infectious diseases, etc) • Medications • Several techniques are used when warm autoantibodies are suspected…

  47. Elution (whenever DAT is positive) Elution techniques “free” antibodies from the sensitized red cells so that the antibodies can be identified

  48. Elution • The eluate is a term used for the removed antibodies • Testing the eluate is useful in investigations of positive DATs • HDN • Transfusion reactions • Autoimmune disease • The red cells can also be used after elution for RBC phenotyping if needed • When tested with panel cells, the eluate usually remains reactive with all cells if a warm autoantibody is present

  49. Elution Methods • Acid elutions (glycine acid) • Most common • Lowers pH, causing antibody to dissociate • Organic solvents (ether, chloroform) • Dissolve bilipid layer of RBC • Heat (conformational change) • Freeze-Thaw (lyses cells)

  50. Adsorption • Adsorption procedures can be used to investigate underlying alloantibodies • After the patient RBCs are incubated, the adsorbed serum is tested with panel cells to ID the alloantibody (if present)

More Related