1 / 13

Computer Practical: Numerical Gasdynamics Richtmyer-Meshkov Instability Group 6

Computer Practical: Numerical Gasdynamics Richtmyer-Meshkov Instability Group 6 Comparison of Results with Different Grid Points 2 nd Order Roe Naseem Uddin Lucy Gray. Richtmyer-Meshkov Instability. Introduction Results Conclusions Questions?. Richtmyer-Meshkov Instability

brian
Download Presentation

Computer Practical: Numerical Gasdynamics Richtmyer-Meshkov Instability Group 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Computer Practical: Numerical Gasdynamics Richtmyer-Meshkov Instability Group 6 Comparison of Results with Different Grid Points 2nd Order Roe Naseem Uddin Lucy Gray

  2. Richtmyer-Meshkov Instability • Introduction • Results • Conclusions • Questions?

  3. Richtmyer-Meshkov Instability Introduction: Definition “The Richtmyer-Meshkov instability arises when a shock wave interacts with an interface separating two different fluids.” • Theoretically Predicted: Richtmyer 1960 • Experimentally observed: Meshkov 1969 • Simulation: Good test case for: • CFD validation. • Investigation into effects of differing parameters on results, e.g, grid size, time step size, flux functions… etc…

  4. Richtmyer-Meshkov Instability Introduction: Basic configuration • Two fluids initially at rest with differing properties, e.g. different densities • Separated by interface with an initial perturbation • Normal shock wave ( travelling from top to bottom from Fluid 1 into Fluid 2) shock interface From: M. Brouillette, The Richtmyer-Meshkov Instability, Annu. Rev. Fluid Mech. 34, 445-68 (2002)

  5. Richtmyer-Meshkov Instability Introduction: Development • Initial configuration • Linear growth with time – crests and troughs are symmetric • Start of nonlinear evolution – asymmetric spike and bubble development • Roll-up of spike • Emergence of small-scales and turbulent mixing From: M. Brouillette, The Richtmyer-Meshkov Instability, Annu. Rev. Fluid Mech. 34, 445-68 (2002)

  6. Richtmyer-Meshkov Instability Simulation: Euler 2D code • MUSCL Technique • 2nd Order in space & time • Temporal evolution & spatial reconstruction • Eulerian remapping & slope limiting (minmod)

  7. Richtmyer-Meshkov Instability Results: Computing Time

  8. Richtmyer-Meshkov Instability Structure details – Generated Vortices Coarse grid simulation The vortex structures are due to baroclinic vorticity at the interface. 0 time step 20 time steps 60 time steps 100 time steps

  9. Vortices are only clear with fine grids Secondary vortex Mushroom shaped vortex

  10. Richtmyer-Meshkov Instability Structure details Generated Vortices Fine Grid Simulation Two pairs of counter rotating vortices in the Mushrom-shaped structure. As time increases two more counter rotating structures appear.

  11. Structure details – mesh comparison Fine Coarse 0 time step 20 time steps 40 time steps

  12. Richtmyer-Meshkov Instability Conclusion: Structure details • Limited spatial resolution  failure to resolve smaller scales Further Work: • Effects of flux function on structures • Expansion to 3D • Expectation of different structures

  13. Thank you for your attention. Further questions?

More Related