1 / 16

MSR Tutorial: MSR_Config and the AAL5_Download Utilitiy

MSR Tutorial: MSR_Config and the AAL5_Download Utilitiy. John DeHart Washington University, Applied Research Lab jdd@arl.wustl.edu http://www.arl.wustl.edu/arl/. MSR_Config. The MSR Configuration module and the beginnings of the MSR Control Processor Software. MSR Control Processor (CP).

bruno
Download Presentation

MSR Tutorial: MSR_Config and the AAL5_Download Utilitiy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MSR Tutorial:MSR_Configand theAAL5_Download Utilitiy John DeHartWashington University, Applied Research Labjdd@arl.wustl.eduhttp://www.arl.wustl.edu/arl/

  2. MSR_Config The MSR Configuration module and the beginnings of the MSR Control Processor Software

  3. MSR Control Processor (CP) • PC connected to MSR Port 0 • CP Software runs on Linux or NetBSD • Will use threads in the future • Eventually it will probably be only Linux • newGBNSC and Jammer • newGBNSC: WUGS Switch Controller • Replaces old GBNSC • Jammer: WUGS scripting language interpreter • Not part of the CP • Can still be used for monitoring • CP takes care of its own WUGS connections • it formulates and sends WUGS control cells directly

  4. Current CP: MSR_Config • Phases of Operation • Switch Reset (resets WUGS, SPCs and FPXs) • Switch Configuration • Build connections needed by MSR • Discovery • Determine what is on each port (SPC, FPX, Glink, …) • SPC • Configure connections for Download • Download • system(3) and shell script to invoke SPC utility: AAL5_Download • AAL5_Download to be discussed separately • MSR Kernel Initialization • uses sendcmd API library • Run • Currently: exit() • Eventually: thread invocation

  5. Source and Executables • source location: wu_arl/msr/cp/configuration • executable location: • wu_arl/msr/bin/$OSTYPE/MSR_Config • Actually, probably doesn’t work from here right now because it is dependent on a few scripts which are kept in the source directory. • For now, run it from the source directory: • cd wu_arl/msr/cp/configuration • Linux/MSR_Config –f config.MSR • This is how we will do it in the exercises • Scripts used (located in wu_arl/msr/cp/configuration) • msrDownload.sh (invokes AAL5_download…) • INITIALIZATION: uses libcmd APIC: • wu_arl/msr/utils/command/cmdAPI.[ch] • When you get idle time during exercises, look through the various scripts and source code.

  6. MSR_Config Usage • Typical usage: • cd wu_arl/msr/cp/configuration • ./$OSTYPE/MSR_Config –f <configuration file> • other options –drr: turn on DRR –dq: turn on Distributed Queueing -fipl: Turn on FIPL -d: turn on debug info -p: turn on WUGS read port test

  7. AAL5_Download • Replaces old download_APIC utility • Can “shotgun” download to <= 8 SPCs at once • Puts exactly same kernel on all 8 • This works fine for MSR where we want same kernel • May not be good for all uses • “Shotgun” number controlled from command line • Can download kernel and file system separately • no need to load file system into kernel before download • still need to load symbol version of kernel into file system before downloading • Takes about 1 minute for the whole download and boot process.

  8. AAL5_Download • Implemented and runs in Stages: • Stage1 uses APIC Control cells to: • reset the SPC(s) • download Stage2 to run on the SPC(s) • Stage2 (boot.out) runs on the SPC • runs SPC boot code to configure CPU and Northbridge • configures APIC on SPC to use AAL5 descriptors • sends pings back to CP, waiting for Stage3 • receives AAL5 frames from Stage3 and sends ACK/NACK • Stage3 runs on PC • syncs with Stage2 • downloads the kernel or FS via 36KB AAL5 frames • retransmits if any errors

  9. Simple View Stage1 PC SPC Stage1 VCI=0x321 APIC VCI=21 VCI=21 VCI=25 Stage3 VCI=23 Stage2 VCI=24

  10. Control cells Reset cell AAL5 Frames Sequential View SPC Memory PC SPC 0x0 Boot and Stage2 Stage1 APIC RESET 0x0FFE00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01 Stage3 Stage2 Kernel and Filesystem 0x0100000 0xFFFFFFF0 Boot ROM

  11. Source and Executables • source location: wu_arl/utilities/SPC/AAL5Download • binary location: • wu_arl/utilities/bin/$OSTYPE/Stage1 • wu_arl/utilities/bin/$OSTYPE/Stage3 • wu_arl/utilities/bin/$OSTYPE/AAL5_download.sh • wu_arl/utilities/bin/$OSTYPE/boot.out • wu_arl/utilities/bin/$OSTYPE/FindNM

  12. Usage • Individual command line commands • ./Stage1 –shotgun 8 –svci 21 –rvci 21 –dvci 23 –uvci 24 –cvci 25 • ./Stage3 –shotgun 8 –native netbsd.MSR –both 24 • ./Stage3 –shotgun 8 –bss SPC24MB.fs –address 0x0196434 –both 24 -go • AAL5download.sh script • ./AAL5download 8 netbsd.MSR SCP24MB.fs 21 21 23 24 25 • Use from MSR Configuration Module • system(msrDownload.sh);

  13. Special Usage Note on Linux • AAL5download.sh script: • needs to be able to determine the start location for the File System • NetBSD uses nm(1) • Linux nm(1) won’t work on a NetBSD binary • We have written a version of nm specifically for AAL5_download.sh: FindNM • FindNM is used automatically when AAL5_download.sh is run on Linux

  14. AAL5_download.sh Usage • > ./AAL5_download.sh • Usage: ./AAL5_download.sh <netbsd_file> <filesystem_file> <start_vci> [<second_vci>] [<third_vci>][<fourth_vci>] [<fifth_vci>]

  15. Stage1 Usage • > ./Stage1 • ./Stage1: [vpi/vci data] [load info] • ./Stage1: [-svpi #] (VPI for local sending of AAL5 control cells (0)) • ./Stage1: [-svci #] (VCI for local sending of AAL5 control cells) • ./Stage1: [-rvpi #] (VPI for local reading of AAL5 control cells (0)) • ./Stage1: [-rvci #] (VCI for local reading of AAL5 control cells) • ./Stage1: [-cvpi #] (VPI for remote CC writes of AAL5 control cells (0)) • ./Stage1: [-cvci #] (VCI for remote CC writes of AAL5 control cells) • ./Stage1: [-dvpi #] (VPI for local write of AAL5 data frames (0)) • ./Stage1: [-dvci #] (VCI for local write of AAL5 data frames) • ./Stage1: [-uvpi #] (VPI for local read of AAL5 data frames (0)) • ./Stage1: [-uvci #] (VCI for local read of AAL5 data frames) • ./Stage1: [-resp #] (Response port of AAL5 control cells) • ./Stage1: [-start #] (Initial VCI sequence (41, 42, 43, 44)) • ./Stage1: [-watch 0x#] (Monitor location for changes) • ./Stage1: [-apic #] (Linux: Apic Id (0 <= X <= 3)) • ./Stage1: [-abit #] (Alternating bit setting) • ./Stage1: [-file <path>] (Name of boot loader (boot.out)) • ./Stage1: [-swap] (use htonl() on output) • ./Stage1: [-shotgun #] (multicast loading 8X) • ./Stage1: [-msr #] (VCI for MSR ONLY AAL5 data frames) • ./Stage1: [-address #] (Physical data write address (0)) • ./Stage1: [-noreset] (do not write reset register)

  16. Stage3 Usage • > ./Stage3 -help • [-switches] (-help) args • -bss <file> Load .bss format file • -native <file> Load native uncompressed file • -strip Remove Symbols from kernel • -debug print lots of stuff • -verbose Dump Elf headers • -elf Elf format execution • -rvpi <VPI> Load VPI number • -rvci <VCI> Load VCI number • -svpi <VPI> Load VCI number • -svci <VCI> Load VCI number • -both <VCI> Set both VCI numbers • -address <PhysAddr> Load file at <addr> • -start <PhysAddr> Start file at <addr> • -go Start kernel • -shotgun <count> Multicast loading 8X

More Related