1 / 33

A new rule of mixtures for natural fibre composites

A new rule of mixtures for natural fibre composites. Amandeep Singh Virk a , Wayne Hall b , John Summerscales c a. University of Queensland, Australia b. Griffith School of Engineering, Australia c. ACMC Plymouth, United Kingdom. Structure of talk. jute fibres fibre tensile tests

carney
Download Presentation

A new rule of mixtures for natural fibre composites

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A new rule of mixtures for natural fibre composites Amandeep Singh Virk a, Wayne Hall b, John Summerscales c a. University of Queensland, Australia b. Griffith School of Engineering, Australia c. ACMC Plymouth, United Kingdom

  2. Structure of talk • jute fibres • fibre tensile tests • statistical modelling (no equations ) • composites • characterisation • new parameters • new rule of mixtures

  3. Jute fibres • Corchorus capsularis. L. - white jute • Corchorus olitorius L. - Tossa jute. • second most common natural fibre, after cotton,cultivated in the world • grown in Bangladesh, Brazil, China, India, Indonesia • our experiments use a well-characterised batch of fibres of unknown provenance from a single source in South Asia

  4. Fibre tensile tests • adapted Grafil Test Method 101.13 • 100 tests at each of 6, 10, 20, 30 and 50 mm long • 50 tests at each of 100, 200, 300 mm • mean Young’s modulus in range 26-34 GPa • assuming circular cross-section (for the moment – but wait!) AS Virk, W Hall and J Summerscales,The tensile properties of jute fibres,Materials Science and Technology,October 2009, 25(10), 1289-1295.

  5. Fibrestrengthand failure strain

  6. Fibre modulus vs length • mean Young’s modulus in range 26-34 GPa

  7. Fibre strength vs length • strength reduces with increasing length

  8. Failure strain vs length • failure strain reduces with increasing length

  9. Weak-link scaling predictions • reference data at single fibre length (point estimate). • Weibull distribution parameters calculated • maximum likelihood parameter estimation methodused to quantify the variation. • single parameter (standard) andMultiple Data Set (MDS) weak link scaling predictionsassessed using GOFN(Anderson-Darling Goodness Of Fit Numbers). • lowest GOFN total indicates ‘best fit’ AS Virk, W Hall and J SummerscalesMultiple data set (MDS) weak-link scaling analysis of jute fibresComposites Part A: Applied Science and Manufacturing, November 2009, 40(11), 1764-1771.

  10. Weak-link scaling: strength Standard-WLS MDS-WLS

  11. Weak-link scaling: strain ε’ Standard-WLS MDS-WLS

  12. Weak-link scaling predictions • weak link scaling should be performed with • at least two points, preferably three, and • with fibre length at two extreme anda third point near the mean fibre length.

  13. Natural logarithm interpolation model (NLIM) • analysis for fibres up to 50 mm longextended to include fibres of lengths ≤ 300 mm • NLIM produces a significant improvementin predicted properties cf MDS-WLS model. • GOFN confirms this finding • Anderson–Darling GOFN as MDS/NLIM= 2.74 for strength and = 2.23 for strain. AS Virk, W Hall and J SummerscalesModelling tensile properties of jute fibresMaterials Science and Technology,January 2011, 27(1), 458-460.

  14. Effect of fibre diameter Easy to select for length, but not for diameter:

  15. Effect of fibre diameter To permit comparisons, data is grouped:

  16. Use ε’ for design (not σ’) Coefficient of variation lower for failure strain than for strength AS Virk, W Hall and J SummerscalesStrain as the key design criterion for failure of natural fibre composites, Composites Science and Technology,June 2010, 70(6), 995-999

  17. … but the fibre CSA irregular Confocal Laser Scanning Microscope (CLSM) images

  18. Rotated to max length onhorizontal axis and fitted by various shapes

  19. True fibre cross-sectional area • 106 individual jute technical fibres measured • true fibrecross-sectional area distribution plotted

  20. True fibre cross-sectional area • log-normal plot of area distributions for 106 fibres

  21. True fibre cross-sectional area • Error in the area measurement based on assumed shape AS Virk, W Hall and J SummerscalesPhysical characterisation of jute technical fibres:fibre dimensionsJournal of Natural Fibres, 2010, 7(3), 216-228.

  22. True fibre cross-sectional area • true cross-sectional area distribution overlaid on the apparent fibre area distribution (left) • location parameter of the apparent fibre area distribution, 7.90, replaced with that of true fibre area distribution, 7.55 (right)

  23. Fibre area correction factor, κ • geometric means forthe apparent fibre area 2697 µm2 andthe measured true fibre area 1896 µm2 • fibre area correction factor = 1.42 AS Virk, W Hall and J SummerscalesThe tensile properties of Jute/Epoxy UD composite in submission for publication

  24. so now composites … • jute fibres dyed black withProcion MX cold fibre reactive dye • fibre tensile tests confirmno significant change in moduli or strengths • quasi-UD composite plates made byresin infusion with a flow medium • Three plates with natural fibre and no pigment • One plate dyed fibres and white pigment in resin

  25. Microscopy • samples fromtensile specimens • Vf: 5 micrographs from each specimen7.81 mm x 2.95 mm (11440 x 4324 pixels) • ηo: 46 micrographs from 6 tensile test specimens27.60 mm x 12.16 mm (19900 x 8764 pixels)

  26. Image analysis • Matlab R2008a digital environment: • micrograph images were converted to8-bit (0-255) greyscale images • contrast of the greyscale images enhanced by scaling intensities to cover full dynamic range • Vf from thresholded intensity histogram • ηo uses mask rotated at 22000 seed pointsseeking minimum intensity at each angle

  27. < S3: secondary wallinner layer, θ =60-90° < S2: secondary wallmiddle layer, θ =10-30° < S1: secondary wallouter layer, θ =50-70° < primary wall Fibre diameter distribution factor • ηd = complex function of fibre structure • well-characterised fibres used in our study, so ηd = 1 J Summerscales, W Hall and AS VirkA fibre diameter distribution factor (FDDF) for natural fibre compositesJournal of Materials Science, 2011, 46(17), 5876-5880.

  28. equations: • modulus • Ec = ηl ηo Vf Ef + Vm Em • strength • σ’c = ηl ηo Vf σ’f + Vm σm* where: σm* is failure stress in matrix at failure of the fibres other parameters as per normal usage

  29. New equations: • modulus • Ec = κηd ηl ηo Vf Ef + Vm Em • strength • σ’c = κηd ηl ηo Vf σ’f + Vm σm* where: κ is a fibre area correction factor ηd is a fibre diameter distribution factor (assumed = 1 here)

  30. Composite parameters (dyed plate) • Κ (FACF) 1.42 • ηd and ηl 1 • ηo (FODF = cos4θ) 0.967 mean fibre angle 7.4° ± 18° • fibre volume fraction 18.9 % ± 3.9 % • tensile modulus 8.18 ± 0.6 GPa • tensile strength 100.0 ± 5.7 MPa

  31. RoM predictions

  32. Triangulation (external data) bar length  percentage error

  33. Conclusions • use of the apparent fibre diameterfrom linear measurementsunderestimates fibre properties • a fibre area correction factor κin rules-of-mixture significantly improves prediction of mechanical properties • References and hyperlinks athttp://www.tech.plym.ac.uk/sme/acmc/Jute.htm

More Related