120 likes | 131 Views
If you are looking for the Riverbed 830-01 Exam Dumps visit Certs4you. Certs4you is the best site to get the 830-01 Braindumps PDF Study Guide. You will surely pass the exam with 100% confidence and approved by the experts. Visit us today for more information and discount.<br>https://www.certs4you.com/riverbed/830-01-dumps.html
E N D
You Need To Know Something About Riverbed 830-01 Exam? • Job Opportunities ? • How To Prepare The 830-01 Exam? • How To Pass 830-01 Exam? • Sample Questions https://www.certs4you.com/riverbed/830-01-dumps.html
Will Help You To Prepare The Exam Visit Us https://www.certs4you.com/riverbed/830-01-dumps.html
How to Pass 830-01 Exam Dumps Click Here https://www.certs4you.com/riverbed/830-01-dumps.html
Question #:1 A Steelhead administrator has recently decided to troubleshoot a TCP connection. He wants to find out if the Steelhead is adding a probe into the TCP SYN packets. For some reason, he is not being successful on his attempts. What could be the reason? (Select 2) A. He is collecting traffic using tcpdump on the Steelhead LAN interface B. He is collecting traffic using tcpdump on the Steelhead WAN interface C. He never started a TCP connection, after he started tcpdump D. He started a TCP connection, after he started tcpdump Answer: A C https://www.certs4you.com/riverbed/830-01-dumps.html
Question #:2 You wish to utilize a SteelHead to fill a high bandwidth, high latency WAN link without data reduction. The link is 622mbps and 500ms latency. What steps should you take to fill the pipe? A. Enable HSTCP, configure the WAN buffers and enable SDR/LZ. B. Enable HSTCP, configure the WAN buffers and disable SDR/LZ. C. Max-TCP and HS-TCP are only for optimized flows, so data reduction cannot be disabled but will fill the pipe anyway. D. Enable MXTCP, configure the WAN buffers and disable SDR/LZ. E. Enable MXTCP, configure the WAN buffers and enable SDR/LZ. Answer: B https://www.certs4you.com/riverbed/830-01-dumps.html
Question #:3 The Interceptor appliance can be configured to redirect traffic to the Steelhead appliances via what methods? A. GRE B. L2 C. ISIS D. Multicast E. Redirection is automatic and not configurable Answer: E https://www.certs4you.com/riverbed/830-01-dumps.html
Question #:4 How is peer affinity reset in the CLI for an Interceptor appliance cluster? A. “peer affinity reset” on all Interceptors B. “neighbor reset” on all Steelheads C. “service restart” on all Interceptors D. “neighbor reset” on all Interceptors Answer: C https://www.certs4you.com/riverbed/830-01-dumps.html
Question #:5 In a Steelhead appliance deployment, the customer decides to use Full Transparency and block all incoming/outgoing TCP connections on port 7800 on their firewall. However, they are finding all TCP connections are passing through the Steelhead appliances (even ones that should be optimized via the in-path rule set). If Full Transparency uses the original IP addresses and TCP ports for inner connections, what is the most likely cause of all TCP connections passing through the Steelhead appliances? A. The OOB (out-of-band) splice connection cannot be made B. The user connections (if using the same ephemeral TCP port) are blocking each other, since the Steelhead appliance had to make all of these sequentially C. Full Transparency is only supported on Steelhead 3U appliances D. All connections are being blocked by the firewall Answer: A https://www.certs4you.com/riverbed/830-01-dumps.html
15% Off By Use This Coupon Code “issue15” Visit Us https://www.certs4you.com/riverbed/830-01-dumps.html
Thank You For More Information Visit Us @https://www.certs4you.com/riverbed/830-01-dumps.html