1 / 20

Transmission Lines

Transmission Lines. Transmission line effects must be considered when length is comparable to ¼ wavelength We will ignore the energy loss on transmission lines Concentrate on time-domain description rather than frequency domain. i. z g. +. z l. e g. e. -. i. x. d. l.

Download Presentation

Transmission Lines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Transmission Lines • Transmission line effects must be considered when length is comparable to ¼ wavelength • We will ignore the energy loss on transmission lines • Concentrate on time-domain description rather than frequency domain i zg + zl eg e - i x d l ECE 766 Computer Interfacing and Protocols

  2. C: Capacitance / Unit Length [F/m] L: Inductance / Unit Length [H/m] R: Conductor Resistance / Unit Length [Ω/m] G: Insulation Conductance /Unit Length [ /m] Note G ≠ 1/R ! Ω Transmission Lines + + - - ECE 766 Computer Interfacing and Protocols

  3. By KVL: In the limit as : Transmission Lines ECE 766 Computer Interfacing and Protocols

  4. Transmission Lines By KCL: In the limit as : ECE 766 Computer Interfacing and Protocols

  5. Lossless Case Take partial derivative w.r.t. x in (1) and partial derivative w.r.t. t in (2),then substitute. Recognize as wave equations ECE 766 Computer Interfacing and Protocols

  6. Show that the solution is in the form . Lossless Case ECE 766 Computer Interfacing and Protocols

  7. Interpretation • is a wave traveling to right with velocity • is a wave traveling to left with velocity • Solving for i, we obtain • is characteristic of line ECE 766 Computer Interfacing and Protocols

  8. Interpretation Note: Each traveling wave direction, e and i are related by z0. ECE 766 Computer Interfacing and Protocols

  9. il + + z0 el zl e - - Reflections • Look at terminations with real impedances frequency independent • Wave of voltage and current traveling to right • At termination ECE 766 Computer Interfacing and Protocols

  10. Reflections • Hence, there must be reflected waves e- and i- such that • In terms of voltage Reflection coefficient ECE 766 Computer Interfacing and Protocols

  11. Reflections • Special cases: • zl = z0 k=0Matched, no reflections. Line looks infinite. • zl = 0, short circuit k = -z0/z0 = -1 • zl = , open circuit k = 1 8 ECE 766 Computer Interfacing and Protocols

  12. t=0 R=3z0 z0 E x=0 x=l t=.3T E 3E/2 t=1.3T E 3E/2 t=2.3T E 1.5E 1.125E Voltage at load E .9375E .75E 7T T 2T 3T 4T 5T 6T Multiple Reflections Hitting load, a wave of E/2 is produced Arriving wave of E/2 isreflected toward load ECE 766 Computer Interfacing and Protocols

  13. x k0=-1 kl=.5 e=0 E e=E T E/2 e=3E/2 2T Time -E/2 e=E 3T -E/4 e=3E/4 4T E/4 e=E 5T e=9E/8 E/8 Time-Space (Bounce) Diagram • Mark reflection coefficients • Write initial voltages • Write wave amplitudes • Update • Wave amplitudes when reflected • Voltages as waves cross ECE 766 Computer Interfacing and Protocols

  14. x k0=.5 kl=1 t=0 R=3z0 e=0 E/4 z0 E e=E/4 T l k0=.5 kl=1 E/4 e=E/2 2T 3z0 Time E/8 e=5E/8 z0 E 3T E/8 e=3E/4 E 4T At x=0 E/16 e=13E/16 5T e=7E/8 E/16 t 4T T 2T 3T 5T Example Magnitude of the first wave: ECE 766 Computer Interfacing and Protocols

  15. Reflections in Digital Lines • Consider one source and one load • Option 1:Do not terminate either end. Ringing will stop eventually. • Pro: Simple, no additional power loss • Con: Limited speed ECE 766 Computer Interfacing and Protocols

  16. z0 Reflections in Digital Lines • Option 2:Matched termination at the end • Pro: No reflections • Con: Excessive power consumptionFor z0=150Ω, power consumption 135mWReduce by duty factor (0.5 for regular lines, 0.05 for floppy drives)Multiply by number of lines Open-collectordriver ECE 766 Computer Interfacing and Protocols

  17. z0 Reflections in Digital Lines • Option 3:Matched termination at the source end • Pro: Can be run at the same speed as load termination If receiver has very high input impedance, full voltage appears at the receiver No power dissipated at constant voltage level • Con: Special, high input impedance line receivers required (not suited for standard TTL) Look at multiple terminations ECE 766 Computer Interfacing and Protocols

  18. x k0=0 kl=1 e=0 z0 E/2 e=.5E T E E/2 e=E 2T E At x=.5L t 2T .5T T 1.5T Reflection in Digital Lines • Problem for multiple receivers • Assume the ideal case, where taps are infinitely short and have infinite impedances • Even for this case, intermediate taps do not get full signal immediately ECE 766 Computer Interfacing and Protocols

  19. e2+, i2+ e1+, i1+ e1-, i1- e3+, i3+ Reflection and Transmission at Junctions ECE 766 Computer Interfacing and Protocols

  20. k=1 3/2 L z0 t=0 k=0 L k=1 2/3 L E/2 T -E/6 E/3 E/3 2T E/3 2E/9 2E/9 3T -E/9 E/3 4T Reflection and Transmission at Junctions Many multiple reflections,eventually come to rest ECE 766 Computer Interfacing and Protocols

More Related