1 / 32

Hydroforming

Hydroforming. 하이드로포밍의 적용 유형 : 튜브 vs. 판재 튜브 벤딩 금형 구조 하이드로포밍 제품 프레스 설비 및 생산라인. 하이드로포밍의 적용 (1). Drive shaft. Inlet cone. BMW rear axle. 하이드로포밍의 적용 (2). Tube vs. Sheet Hydroforming. Production line for tube hydroforming. Tube bending(1). Tube bending(2). Tube bending(3).

chava
Download Presentation

Hydroforming

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hydroforming • 하이드로포밍의 적용 • 유형 : 튜브 vs. 판재 • 튜브 벤딩 • 금형 구조 • 하이드로포밍 제품 • 프레스 설비 및 생산라인

  2. 하이드로포밍의 적용(1) Drive shaft Inlet cone BMW rear axle

  3. 하이드로포밍의 적용(2)

  4. Tube vs. Sheet Hydroforming

  5. Production line for tube hydroforming

  6. Tube bending(1)

  7. Tube bending(2)

  8. Tube bending(3)

  9. 하이드로포밍의 해석(1)

  10. 하이드로포밍의 해석(2)

  11. 하이드로포밍의 해석(3)

  12. 금형 구조(1) Schematic view of a die layout

  13. 금형 구조(2) Die systems for prototyping and production

  14. 금형 구조(3) Hole punching, notching and bending during hydroforming

  15. 하이드로포밍 범위(1) Internal pressure as a function of the inside radius

  16. 하이드로포밍 범위(2) Hydroforming parts for the fitting industry

  17. 하이드로포밍 범위(3) Present state of the art in hydroforming using tubes as blanks

  18. 하이드로포밍 범위(4) Achievable branched tube heights The achievable height decreases with an increasing degree of difficulty

  19. Hydroformed Products

  20. Exhaust gas system(1) • 2,01-16 V-4-cylinder • Heat resistant • stainless steel

  21. Exhaust gas system(2) • M3 6-cylinder • Heat resistant • stainless steel

  22. VW-Hydroformed subframe for 4WD drive rear axle

  23. Light truck side rail

  24. Engine cradle • Modified low • carbon steel St 34 • Pre tube • 2,600*65*2 mm for Opel Astra and Zafira

  25. Production lines installed since 1997

  26. Hydroformed R&D-front-end

  27. 하이드로포밍 설비(1) Frame-type hydroforming press

  28. 하이드로포밍 설비(2) Compacting presses/IHV-presses

  29. 하이드로포밍 설비(3) IHV-plant for large-scale series production

  30. 하이드로포밍 설비(4) IHV-press/IHV-control/Robots

  31. 하이드로포밍 설비(5) Press plant 2*50,000 kN

  32. 하이드로포밍 설비(6) Press plant for the production of Cu T-fittings

More Related