1 / 13

INDEPENDENT PROJECT ID 1035 TEAM MEMBERS : Ravi Teja Venkatesh

INDEPENDENT PROJECT ID 1035 TEAM MEMBERS : Ravi Teja Venkatesh. D.C TO A.C INVERTER. Components required :-. Two 68uf 25v tantalum capacitor.(C1,C2) Two 10 ohm, 5 watt Resistor.(R1,R2) Two 180 ohm, 1 watt Resistor.(R3,R4)

chinue
Download Presentation

INDEPENDENT PROJECT ID 1035 TEAM MEMBERS : Ravi Teja Venkatesh

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. INDEPENDENT PROJECT ID 1035 TEAM MEMBERS: Ravi TejaVenkatesh

  2. D.C TO A.C INVERTER

  3. Components required:- • Two 68uf 25v tantalum capacitor.(C1,C2) • Two 10 ohm, 5 watt Resistor.(R1,R2) • Two 180 ohm, 1 watt Resistor.(R3,R4) • Two 1N4007 Silicon Diode.(D1,D2) • Two 2N3055 NPN Transistor.(Q1,Q2) • One 24v Centre tapped Transformer.(T1) • Other requirements like wire ,case etc.

  4. Schematic Circuit Diagram:

  5. Working of D.C to A.C Inverters: • Electromagnetic induction is the main underlying principle in the working of the dc to ac inverters. • The Transistors Q1,Q2 and the Transformer T1 determine the power output of the inverter. • The bigger the Transformer and more powerful the Transistors the more power output is obtained. • The inverter requires steady supply of current which is provided by the Lead-Acid Batteries(as it operates at high wattages).

  6. The inverters use electro mechanical switch , to immediately switch to the mode of discharging circuit of the inverter as soon as there is a power cut. • This technique uses electro magnetic force to either make or break the circuit, i.e to switch it on or off.

  7. Within the Transformer, there are two coils namely primary and secondary coils. Number of turns in each of these coils is significant . let the number of turns in and e.m.f of the primary and secondary coils be N1,E1 & N2,E2;

  8. Then they satisfy the relation : E2= -(N2/N1)E1 On the basis of the above relation ,the voltage output is determined.

  9. NOTE: Tantalum capacitors are used instead of other capacitors because they do not have regular electrolytes which possibly over heat and explode.

  10. References: • http://www.aaroncake.net/circuits/inverter.asp • GOOGLE images.

  11. THANK YOU

More Related