1 / 7

Bunsen Burner

Bunsen Burner. Simple steps for using a Bunsen burner In a laboratory. Equipment needed. A lighter Safety goggles The objet that you want to heat (burn). Step 1. First- Make sure the Bunsen burner is away from any overhead shelving etc. at least 30 cm away.

cisco
Download Presentation

Bunsen Burner

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bunsen Burner Simple steps for using a Bunsen burner In a laboratory.

  2. Equipment needed • A lighter • Safety goggles • The objet that you want to heat (burn).

  3. Step 1 • First- Make sure the Bunsen burner is away from any overhead shelving etc. at least 30 cm away. • Also remove flammable things from area. If you have long hair, tie it back.

  4. Step 2 • Check if the hose and pipes aren’t leaking. • Tell that you’re using the Bunsen burner to other people in the Laboratory.

  5. Step 4 • Turn the gas on. Have a lighter ready • Light it. • Adjust the flame by using the air control, to control the air flow for the flame

  6. Security • Don’t leave the flame unattended at any time. • Turn it off if not in use by turning the gas off.

  7. References • Wpi.edu (1995) Safety: Bunsen burner Safety Guidelines - WPI. [Online] Available at: http://www.wpi.edu/offices/safety/bunsen.html [Accessed: 3 Sep 2012].

More Related