1 / 12

FTS turbo Development

FTS turbo Development. By Nathan Buescher November 7, 2003. Objectives. Build high-speed fast tool servo for diamond turning Operate at 10 KHz or greater 5 m m stroke ( P-V ). Background. 1st FTS : 20 m m stroke, 2 KHz bandwidth. Background. Ultramill I (500 Hz) and II (5 KHz).

ckraus
Download Presentation

FTS turbo Development

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FTSturbo Development By Nathan Buescher November 7, 2003

  2. Objectives • Build high-speed fast tool servo for diamond turning • Operate at 10 KHz or greater • 5 mm stroke ( P-V )

  3. Background • 1st FTS : 20 mm stroke, 2 KHz bandwidth

  4. Background • Ultramill I (500 Hz) and II (5 KHz)

  5. Work Plan and Technical Challenges • 1. Actuator selection • Shorter, stiffer piezo stack • Geometry • Reduced hysteresis materials

  6. Work Plan and Technical Challenges • 2. Structural Design • Small, lightweight moving mass/tool holder • Preload and flexures • Capacitance gauge orientation

  7. Work Plan and Technical Challenges • Examples

  8. Work Plan and Technical Challenges • 3. Heat Generation • Fluid Cooling system • Reduced hysteresis  Air-cooled

  9. Work Plan and Technical Challenges • 4. Control System Development • System model • Frequency Response  Transfer fcn • PID or pole placement control

  10. Work Plan and Technical Challenges • Example of Closed-Loop control scheme

  11. Work Plan and Technical Challenges • 5. Machining Experiments • Cutting error and surface shapes evaluated • Dynamic response (overshoot, rise time, etc) • Test wide range of frequencies and spindle speeds

  12. Results • 5 mm stroke with bandwidth of 10 KHz • Small, compact design with maximized component life • Closed loop feedback system with acceptable dynamic values

More Related