1 / 26

Lighting calculations

Lighting calculations. The Illuminance: (E) شدة الإضاءة = Luminous Flux / area of the sphere surface E= Φ/ A E= I/ r 2 = lumen/ m 2 = lux. The luminance (Luminous Intensity) (I) شدة الاستضاءة I= Φ/ω cd Where: ω = solid angle = (Φ/A)* r 2 = E* r 2 Candela.

clancy
Download Presentation

Lighting calculations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lighting calculations

  2. The Illuminance: (E) شدة الإضاءة =Luminous Flux / area of the sphere surface E=Φ/A E= I/ r2 = lumen/ m2 = lux

  3. The luminance (Luminous Intensity) (I)شدة الاستضاءة I= Φ/ω cd Where: ω = solid angle = (Φ/A)* r2 = E* r2 Candela

  4. Inverse square law • Inverse square law: Double the Radius: • Surface area bounded by a solid angle of 1 sr now increases to 4m2 • Luminous flux remains Φ= 1lm • Illuminance E drops from 1 luxto ¼ lux

  5. What can we do with this? It’s the basic building lighting We can find the illuminance on a desk from a incandescent light bulb overhead: Bulb: 60W * 20 lm/W = 1200 lm 1200/4π≈ 100 cd if point source Desk : E = 100/22 = 25 lux LUMINOUS EFFICACY Is the ratio of the luminous flux emitted by a lamp to the power taken by it. (unit: LUMENS PER WATT, lm/W)

  6. Calculation of point illuminance level:Ep Which are generated by individual light source: • E = I/r2 But, r = h/ cos (∞) So, • Where, • Luminous Intensity(I) • Hieght (h) • Light Incidence Angle (∞) Ep= I /h2 cos3 ∞

  7. Factors affected on illuminance calculations • Room Reflectance • The room is considered to consist of three main surfaces: (a) the ceiling cavity, (b) the walls, and (c) the floor cavity (or the horizontal working plane). • The effective reflectancesof the above three surfaces affect the quantity of reflected light received by the working plane.

  8. Factors affected on illuminance calcuations • Room surface maintenance factor(RSMF) is the proportionofthe illuminance provided by a lighting installation in a room after a set time compared with that occurred when the room was clean. • Utilization factor (UF) is the proportion of the luminous flux emitted by the lamps which reaches the working plane. Factors that affect the value of UF are as follows: (a) light output ratio of luminaire (b) flux distribution of luminaire (c) room proportions (d) room reflectance (e) spacing/mounting height ratio • Luminaire maintenance factor (LMF) is the proportion of the initial light output from a luminaire after a set time to the initial light output from a lamp after a set time. • Three factors must be considered in its determination: (a) the type of luminaire, (b) atmospheric conditions, and (c) maintenance interval.

  9. Lumen Method Calculations

  10. Where: E = average illuminance over the horizontal working plane     n = number of lamps in each luminaire     N = number of luminaire     F = lighting design lumens per lamp, i.e. initial bare lamp luminous flux      UF = utilisation factor for the horizontal working plane      LLF = light loss factor      A = area of the horizontal working plane

  11. The Luminous Flux (Φ)= EA/MU

  12. Calculate the utilization factor • Calculate the Room Factor: K = 0.8W + 0.2L he Where: W= width of the room L = length of the room • From the table find “η” • The Luminous Flux (Φ)= EA • η

  13. Room Factor is the proportion of the initial light output from a luminaire after a set time to the initial light output from a lamp after a set time. • It depends on room dimension

More Related